Ny-Trex 110012 DEI EFI Wet Nitrous Oxide Systems

Ny-Trex nitrous systems use only the highest quality materials and components to produce the best looking, best performing and most reliable wet system around.

Ny-Trex systems have been thoroughly dyno-tested on numerous vehicles to ensure the most safe and reliable performance possible.

EFI 4 & 6 Cylinder Wet Nitrous Complete Systems Include:

• 10lb Hi-Flo Bottle (Mean Green or Wet Black)
• Chrome 660 Hi-Flo valve with gauge port
• 14 braided stainless N2O feed line with -4 blue ends
• 22x-3 braided stainless nozzle lines, 1 blue, 1 red
• T-Rex Nozzle & adapter (up to 300+HP)
• Adjustable HP jetting
• 15A WOT micro switch
• Quick-Clamp bottle brackets
• Mount hardware, brackets, bolts, screws, clamps, ties
• Electrical components, wire connectors, relays, switches
• Drill & tap, fittings, sealant
• Hot Shot Nitrous Solenoid
• Hot Shot Fuel Solenoid

Special Features

• Exclusive T-Rex Nozzle with true blend spray bowl delivers a swirl cone plume at 70 angle to center the throttle body for an even blend. Flows up to 300+HP yet works great delivering only 35HP.
• Chrome Plated 660 Hi-Flo bottle valve with integrated gauge port always reads bottle pressure.
• Solenoid valves are made with Volt-Trap coils for stronger, more efficient power, allows for larger orifice, more flow and works with as few as 9 volts.
• Plungers are made of high grade stainless with greater tolerances to prevent sticking. The N2O seal is Teflon and a special Viton seal is used for fuel.
• Dual Taper Jets provide a consistent flow of nitrous and fuel and come in a large array of sizes.
• Easy install components such as well nuts to install bottle topside, drill bit and tap for fuel connection, Teflon sealant and easy install Quick-Guide.

V8 EFI Wet Nitrous System Complete Systems Include:

• 10lb Hi-Flo Bottle (Mean Green or Wet Black)
• Chrome 660 Hi-Flo valve with gauge port
• 18 braided stainless N2O feed line with -4 blue ends
• 22x-3 braided stainless nozzle lines, 1 blue, 1 red
• T-Rex Nozzle & adapter (up to 300+HP)
• Adjustable HP jetting
• 15A WOT micro switch
• Quick-Clamp bottle brackets
• Mount hardware, brackets, bolts, screws, clamps, ties
• Electrical components, wire connectors, relays, switches
• Drill & tap, fittings, sealant
• Hot Shot Nitrous Solenoid
• Hot Shot Fuel Solenoid

Special Features

• Exclusive T-Rex Nozzle with true blend spray bowl delivers a swirl cone plume at 70 angle to center the throttle body for an even blend. Flows up to 300+HP yet works great delivering only 35HP.
• Chrome Plated 660 Hi-Flo bottle valve with integrated gauge port always reads bottle pressure.
• Solenoid valves are made with Volt-Trap coils for stronger, more efficient power, allows for larger orifice, more flow and works with as few as 9 volts.
• Plungers are made of high grade stainless with greater tolerances to prevent sticking. The N2O seal is Teflon and a special Viton seal is used for fuel.
• Dual Taper Jets provide a consistent flow of nitrous and fuel and come in a large array of sizes.
• Easy install components such as well nuts to install bottle topside, drill bit and tap for fuel connection, Teflon sealant and easy install Quick-Guide.