BD Diesel UP4221-JS Injector - Ford 6.0l 2004-2007 After 09/21/2003

58V Fuel Injection Control Module
The BD Diesel Fuel Injection Control Module for the Ford 6.0L is a remanufactured unit that solves common problems on stock units. It provides added power and eliminates frequent logic board errors. All units are cleaned, repaired and reassembled using 100% replacement components and 100% rework to eliminate any intermittent failures. All modules are tri-temp tested to ensure accurate and reliable operations.

• Better Cold Starts
• Increased Horse Power
• Preprogrammed Unit
• Does Not Set Any Codes

6.0L OEM PurePower Injectors
These 6.0L OEM injectors are remanufactured to today's original equipment specifications. PurePower goes beyond all aftermarket rebuilders by replacing components typically reused such as the rail connections, thru-rod, nuts, washers, o-rings, springs and spool valves.

• The Control Valve body and spool are both precision ground to specific diametrical clearance for sealing and directing oil for injector operation.
• All spools are replaced 100% and machined to original specification. All other competitors re-use these valves.
• Each injector is 100% flow tested and nitrogen tested for leaks.
• Flow volume, leakage rate, max needle lift and valve opening pressure (VOP) are also tested.
• All sealing surfaces are refinished and maintain less than 2 microns of flatness, which assures long life, high mileage and performance.
• The intensifier body is precision honed then matched with new plungers to operate at extreme pressures and temperatures.
• While the competition reuses old dampening pins and check plates, PurePower replaces both parts to prevent cavitation.

Forget the aftermarket rebuilders, buy a quality OEM injector at an aftermarket price.

• OEM Fuel Injector
• Ford 6.0L Engines Up to 09/21/03