EBC DP51031 Brake Rotors

Bluestuff NDX Brake Pads
Full Race Pad
FMSI ID D592

The EBC Bluestuff NDX formulation has been developed during years of track driving and in 2009 was refined to be suitable for the 3000lb USA model cars such as Mustang,Camaro,GTO,Viper and especially Corvette. Even on the (shall we say) difficult to perfect, race braking on the later Padlet type caliper using 6 and 8 piece pad sets the NDX performs well.

The NDX pad material is bonded to the steel backing plates using multiple high strength interlock holes and a unique chemical interlayer which raises shear and bond strength by a factor of five and prevents pad to plate separation. The pads are then baked and ground and feature high volume Vee grooves to catch the inevitable large amount of debris from track use.

Target use is all types of fast and heavier cars in performance and race driving with much enhanced lifetime over our previous Yellowstuff grade pads.

EBC Bluestuff NDX pads are now PRE BEDDED by heat scorching. This new piece of equipment that we have installed at the UK EBC Factory allows us to offer you a pre bedded brake pad that beds in within 3-4 stops at the track. This major advantage puts EBC ahead of its competition where drivers can arrive at the track, fit new pads and in a single warm up lap can be ready to race. This does of course still require consideration for rotor condition which must be flat and smooth to achieve good contact, we can do a lot at EBC Brakes but we cannot work miracles (yet).