Questions? Feedback? powered by Olark live chat software

Supertech Performance Piston Kit; For Turbo/Nitrous Applications; For use w/ Ring Set GNH8700 NISSAN 240SX


Images May Not be Vehicle Specific. For Display Purposes Only.

Place Order Here

Part #: P4-NSR20-87-CR9
Notes: Piston Kit
For Turbo/Nitrous Applications
For use w/ Ring Set GNH8700
MSRP: $593.78
Your Price: $116.35
Free Shipping

Specs

Bore 87.00mm[1.0mm+ Oversized]
Comp Height 1.25"(32mm)
Comp Ratio 9.6:1
Comp Ratio 9:1
Dome/Dish Volume CCs -10
Pin Diameter 22mm (.866")
Pin Weight 90grams
Piston Weight 306grams
Rod Length 5.366
Skirt Style Round
Stroke 3.386"

This Item Also Available In

Part Number Price Notes & Specs
P4-NSR20-86.5-CR9 $116.35 Notes Piston Kit
For Turbo/Nitrous Applications
For use w/ Ring Set GNH8650
Bore 86.50mm[0.5mm+ Oversized]
Comp Height 1.25"(32mm)
Comp Ratio 9.5:1
Comp Ratio 9:1
Dome/Dish Volume CCs -10
Pin Diameter 22mm (.866")
Pin Weight 90grams
Piston Weight 303grams
Rod Length 5.366
Skirt Style Round
Stroke 3.386"
P4-NSR20-87.5-CR9 $116.35 Notes Piston Kit
For Turbo/Nitrous Applications
For use w/ Ring Set GNH8750
Bore 87.50mm[1.5mm+ Oversized]
Comp Height 1.25"(32mm)
Comp Ratio 9.7:1
Comp Ratio 9:1
Dome/Dish Volume CCs -10
Pin Diameter 22mm (.866")
Pin Weight 90grams
Piston Weight 307grams
Rod Length 5.366
Skirt Style Round
Stroke 3.386"

All Fitments

NISSAN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1991 - 1999 180SX ALL ALL ALL ALL SR20DET ALL
1989 - 1998 240SX ALL ALL ALL ALL ALL ALL w/ SR20DET Swap
1989 - 2002 SILVIA ALL ALL ALL ALL SR20DET ALL
NON-US VEHICLE
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
0 - 0 SEE NOTES FOR FITMENT ALL ALL ALL ALL ALL ALL For Nissan SR20VE 2.0L DOHC

Product Description

Supertech Pistons are manufactured from extruded high silicone, enhanced 4032 alloy (with additional Cu, Ni & Mg) that had low thermal expansion, excellent wear resistance and higher thermal conductivity. Supertech Pistons, with this alloy, have withstood up to 42psi of boost, with alcohol, without any problems.

A two or three step forging process yields a fine structural grain which are then submitted to several machining steps in state of the art CNC machines.

Several heat treatments provide the piston with high tensile strength and evenly distributed hardness.

Contact reduction grooves are standard, and pin bores are honed and reamed for precise fit. Wrist pins are constructed of cold extruded chrome moly steel for high strength and used with wire clip locks.

Finally, the pistons receive a ‘phosphate dry lubricant’ coating to protect the rings against ‘micro-welding’ and enhance lubrication on the skirt/cylinder area.

Compression ratios are computed with .030” head gasket and .010” deck unless indicated in each case.

Product Reviews

Be the first to review this item.

Rating
Title
Review