Radium Engineering 20-0079-01 Fuel Surge Tank
Single Deatschwerks 9-301-100
Pump Included
A fuel surge tank (FST) is designed to
prevent fuel starvation to the engine on vehicles with inadequate
fuel tank baffling. The FST fuel pump(s)
directly feed the fuel rail(s). The volume of fuel inside the surge
tank acts as a buffer to always keep the FST pump supplied with fuel. This volume is
maintained by the main fuel tank?s pump as well as the fuel
returning from the fuel pressure regulator. Excess fuel in the
surge tank is returned back to the vehicle?s main fuel tank.
The surge tank also provides a quick and easy way to upgrade any
standard fuel system without the need to modify the stock fuel tank
or pump. This is an excellent fueling solution for vehicles
installing large fuel demand power upgrades such as forced
induction.
All Fuel Surge Tanks Include:
- Extruded and Machined Aluminum 1.5 Liter Canister
- Bright Dipped Anodized and Laser Engraved Housing
- Removable O-Ring Sealed Billet Aluminum Caps
- -6AN Male Feed and Return O-Ring Port Fittings
- Nickel Plated Electrical Connector with 24? Flying Leads
- Corrosive Resistant Stainless Steel Hardware
- Extra O-rings For Servicing
All pumps mount internally using gasoline, ethanol, and methanol
resistant wiring. For dual-pump configurations, each pump is wired
independently. All hoses are submersible and E85 safe. The pump outlet fitting(s) are available in
-6AN male size only (shown in green). The other ports can be
adapted to other -AN sizes using adapters
(sold separately).
How to Select Your Fuel Surge Tank
Configuration
Determine if your application will require one or two pumps. This
is based on determining how much fuel flow the engine will
need.
Next, decide if the pump(s) will be purchased through Radium
Engineering (pump included) or elsewhere (pump not included). Use
the drop-down menu to make your selection. NOTE: When pump(s) are included, the FST comes fully assembled and is ready to be
installed in the vehicle. When purchasing without pumps, use the
included instructions to aid in the assembly.
Next, select the fuel pump model that will be used from the
options shown.
Walbro GSS342 255LPH
Pump
This FST can be configured for single or
dual pumps.
Walbro F90000262 Gas
Pump
This surge tank comes in a single pump version only.
Walbro F90000267 E85 Pump
This surge tank comes in a single pump version only.
AEM 50-1000 Gas
Pump
This FST can be configured for single or
dual pumps.
AEM 50-1200 E85 Pump
This FST can be configured for single or
dual pumps.
Deatschwerks 9-301-1000 Pump
This FST can be configured for single or
dual Deatschwerks pumps.
Aeromotive 11142 Pump
This FST can be configured for single or
dual pumps.
Bosch 0 580 254 044 Pump
This surge tank comes in a single pump version only.