G2-99-0111 - Grams Performance Fuel Injectors
This part should fit your vehicle. It is a universal part.
Place Order Here
Part #: G2-99-0111
Notes: Fuel Injector
1600 Std EV14
Length 48mm
Top O-Ring 14mm
Lower O-Ring 14mm
Connector Type EV1/Jetronics
Single
MSRP: $209.99
Your Price: $186.62
Free Shipping
This Item Also Available In
Part Number |
Price |
Notes & Specs |
G2-99-0110
|
$183.05 |
Notes |
Fuel Injector 2200cc Std EV14 Length 48mm Top O-Ring 14mm Lower O-Ring 14mm Connector Type Denso/Sumitomo Single
|
Size |
2200cc |
G2-99-0113
|
$93.30 |
Notes |
Fuel Injector 1000cc Shorty EV14 Length 34mm Top O-Ring 14mm Lower O-Ring 14mm Connector Type EV6/USCAR Single
|
Size |
1000cc |
G2-99-0108
|
$93.30 |
Notes |
Fuel Injector 1000cc Std EV14 Length 48mm Top O-Ring 14mm Lower O-Ring 14mm Connector Type EV6/USCAR Single
|
Size |
1000cc |
G2-99-0109
|
$124.98 |
Notes |
Fuel Injector 1150cc Shorty Extended Tip EV14 Length 34mm Top O-Ring 14mm Lower O-Ring 14mm Connector Type EV1/Jetronics Single
|
Size |
1150cc |
G2-99-0106
|
$69.00 |
Notes |
Fuel Injector 550cc Std EV14 Length 48mm Top O-Ring 14mm Lower O-Ring 14mm Connector Type EV6/USCAR Single
|
Size |
550cc |
G2-99-0112
|
$93.30 |
Notes |
Fuel Injector 750cc Shorty EV14 Length 34mm Top O-Ring 14mm Lower O-Ring 14mm Connector Type EV6/USCAR Single
|
Size |
750cc |
G2-99-0107
|
$94.95 |
Notes |
Fuel Injector 750cc Std EV14 Length 48mm Top O-Ring 14mm Lower O-Ring 14mm Connector Type EV6/USCAR Single
|
Size |
750cc |
G2-99-0123
|
$71.20 |
Notes |
Fuel Injector Std EV14 Length 48mm Top O-Ring 14mm Lower O-Ring 14mm Connector Type EV6/USCAR Single
|
Size |
350cc |
All Fitments
UNIVERSAL |
Year |
Model |
SubModel |
Cylinders |
Liter |
Aspiration |
Eng Desg. |
Fuel |
Notes |
0 - 0 |
NON APPLICATION SPECIFIC |
ALL |
ALL |
ALL |
ALL |
ALL |
ALL |
|
Product Description
Grams Performance is proud to offer the most innovative high-performance fuel injectors for today’s performance vehicles. Premium materials, advanced manufacturing techniques and stringent quality control procedures mak Gram Performance the leader in high-performance fuel injectors.
An engines’s fuel injectors perform a vital role in the accurate metering and atomization of fuel. Grams Performance accomplishes this with its high-impedance Bosch Motorsports EV14 fuel injectors that are modified for high-performance use. Each injector is individually balanced, flow tested and dynamically matched for characterization within one percent of each other. To ensure leak-free operation and optimal performance, each injector is then pressure tested up to 220 psi. The results are unmatched cylinder-to-cylinder consistency, even at low pulse width’s, as well as optimal idle quality, response and performance. Grams Performance Fuel Injectors’ ultra-fast and precise solenoids feature a linear response curve across a wide range of operating conditions and can accurately meter fuel even at the highest pressures and shortest pulse widths.
The EV14 injector’s superior ball/pintle valves combine with Grams Performance’s precision-modified nozzles allow for consistent performance up to 118 psi, making them suitable for a wide range of applications, yet without exhibiting any of the high-pressure problems often associated with other injectors. The optimized spray pattern aso helps improve mixture preparation as well as atomization.
Grams Performance injectors are cold-cut with diamond grinders in less than three seconds for high performance with “pre-seating”. Abrasive cutting creates heat, which leads to poor spray patterns and the need for competitors to pre-seat their injectors to reduce distortion. Each injector is also fitted with high-quality Viton O-rings that are resistant to extreme temperatures and harmful oils found in some fuels.
Each injector set includes dead time compensation values to help ensure consistent air/fuel ratios and optimal performance when tuning. Grams Performance Fuel Injectors are carefully tested and matched in controlled laboratory environments using state-of-the-art equipment and are subjected to rigorous dyno, street and race track testing to ensure proper performance in the most extreme conditions.
Features
- High-impedance design (no resistor box required)
- Cold-machined tips for high-precision operation
- Ultra-fast solenoids for precise fuel metering
- Linear response across wide range of operating conditions
- All injectors balanced, blueprinted and matched within one percent
- Compatible with all known fuels including gasoline, methanol and ethanol
- Unmatched cylinder-to-cylinder consistency and optimal idle quality