Design Engineering Dei 010414 DEI 0.5" I.D. Cool Tube - 36"
Design Engineerings Cool Tube is designed to protect wiring fuel
lines brake lines and other areas from continuous heat up to 500 F.
Manufactured from convoluted Nylon 6 tubing and covered in an
aluminized fiberglass fabric Cool Tube combines flexibility with
maximum thermal protection. The aluminized covering reflects heat
and reduces temperatures an average of 43 percent while resisting
abrasion chemicals and condensation.
Cool Tube
DEI Cool-Tube is designed to protect wires, fuel and
brake lines and other areas from extreme heat. Capable of
reflecting radiant heat up to 500F, Cool-Tube reduces temperatures
by an average of 43%. Manufactured from convoluted nylon 6 tubing
(not with inferior plastic) and covered with an aluminized
fiberglass fabric. Cool-Tube combines flexibility with maximum
thermal protection and resists abrasion, chemicals, oil,
condensation and other contaminates.
Cool-Tube can be slit lengthwise for ease of installation
eliminating the need of disconnecting wires, fuel or brake lines.
Cool-Tube is available in 1/2 and 3/4 diameters in both 3 and 15
lengths.
Features
Protects wires, fuel and brake lines etc
Withstands up to 500F radiant heat
Combines flexibility with maximum thermal protection
Reduces temperature an average of 43%
Cool Tube Extreme
DEI Cool-Tube Extreme is wire re-enforced and
constructed of a special composite material with a stylish
aluminized mylar outer covering. Capable of reflecting up to 750 F
radiant heat, Cool-Tube Extreme is flexible enough to conform to
the tightest bends and protect even the most difficult to reach
spots. Cool-Tube Extreme is ultra light and has many uses and
supplies a quality finished look.
Available in 5 diameters and 4 vivid colors, Cool-Tube Extreme
can be easily slit to install on existing wires, cables or hoses
without removal.
Features
- No need to remove wires, cables or hoses
- 5 available diameters
- Available in 4 vivid colors
- Withstands 750F radiant heat
- Reflects 90% of radiant heat away from wires, cables and
hoses
- Easily trim to length
Cool-Tube is designed to protect wires, cables, fuel, brake
lines and more from damaging heat sources. Manufactured from
convoluted nylon 6 tubing and covered with an aluminized fiberglass
fabric, Cool-Tube combines flexibility with maximum thermal
protection and resists abrasions, chemicals, oil, condensation and
other contaminates. Cool-Tube is pre-slit lengthwise for ease of
installation eliminating the need to disconnect wires, fuel or
brake lines. Cool-Tube is available in 1/2" and 3/4" diameters in
both 3' and 15' lengths.
- 1/2" I.D and 3' length
- Reduces temperature an average of 43%
- Made of nylon tubing-not plastic
- Withstands up to 500F direct continuous heat
- Protects wires, cables, fuel and brake lines
