SPC Performance 23403 Camber Jeep Sleeve - 3/4

The SPC Performance 23403 Camber Jeep Sleeve is a +0.75° (3/4°) offset camber sleeve (camber bushing) that corrects front camber on the Jeep Wrangler (JL). It replaces the sleeve that links the upper ball joint to the knuckle.

Key Features:

• +0.75° (3/4°) camber sleeve
• Front adjustment range across the sleeve family: camber 0°, +0.25°, +0.5°, +0.75°, +1.0° and +1.25°
• Installation time: 0.5 hr per side
• Required: 1 kit per wheel
• Hex chromate-free finish certified to a 700 hour salt spray test

How to choose the right sleeve: Determine which offset sleeve is already in the knuckle, then replace it with a new offset to reach the camber you need. Most JL Wranglers leave the factory with a +0.25° sleeve. For example, if you need 0.5° more camber and have the factory +0.25° sleeve, the +0.75° sleeve (23403) will bring camber into spec.

If you work on many Jeeps or are unsure which offset you need, SPC also offers a six-piece set that includes one of each sleeve.