Questions? Feedback? powered by Olark live chat software

Images May Not be Vehicle Specific. For Display Purposes Only.

Wilwood Engineering Master Cylinder UNIVERSAL

Fitments

UNIVERSAL
260-0966 Caliper Pressure Gauge
1500 PSI
260-10513 Rebuild Kit
For 5/8in Short Remote M/C
260-1874 Residual Pressure Valve
Finish Blue
Size 2#
260-3279 Residual Valve w/ Fittings
Finish Red
Size 10#
260-3396 Remote Master Cylinder Reservoir Inlet Adapter
260-3501 Check Valve
Self Bleeder
260-5524 Slave Cylinder Rebuild Kit
260-6766 High Volume Master Cylinder
Bore 1.00in
Finish Bare
260-8419 Proportioning Valve
Knob Adjust
260-8555 Aluminum Tandem Master Cylinder
Bore 1.00in
Finish Bare
260-8742 Reservoir Kit
Compact Remote M/C
w/ Fittings
10.7oz Reservoir
260-9439-BK Aluminum Tandem Master Cylinder
w/ Pushrod
Bore 7/8in
Finish Black e-Coat
260-10264 Adapter
Inlet Short Remote M/C
260-10922 Proportioning Valve
Knob Adjust
3/8-24 IF Inlet & Outlet
260-3380 Combination Remote Master Cylinder
Bore 1-1/8in
Finish Bare
260-3393 Reservoir Clamp Assembly
260-4202 Handlebar Master Cylinder
Bore 5/8in
Finish Black e-Coat
260-5520 Go Kart Master Cylinder
Bore 1/2in
Finish Blue Anodized
260-5752 Reservoir
Remote Master Cylinder
4.0oz Reservoir
260-6900 Rebuild Kit
High Volume Aluminum M/C
Bore 1.00in
260-8420 Proportioning Valve
Lever Adjust
260-8555-BK Aluminum Tandem Master Cylinder
Bore 1.00in
Finish Black e-Coat
260-8556-P Aluminum Tandem Master Cylinder
Bore 1-1/8in
Finish Media Burnished
260-9921 Line Shut-Off Valve
Solenoid Activated
260-10204 Reservoir
Short Remote M/C
7oz Reservoir
260-10342 Hose Clamp
1.12 Dia X 5/16
Short Remote M/C
260-10376 Compact Remote Flange Mount Master Cylinder
Bore 1-1/8in
Finish Black e-Coat
260-10516 Rebuild Kit
For 7/8in Short Remote M/C
260-1333 Slave Cylinder
Bore 5/8in
Finish Black e-Coat
260-4894 Tandem Master Cylinder Kit
Bore 1-1/16in
Finish Anodized
260-6765 High Volume Master Cylinder
Bore 7/8in
Finish Bare
260-7577 Reservoir Kit
Compact Remote M/C
w/ Fittings
4.0oz Reservoir
260-8556 Aluminum Tandem Master Cylinder
Bore 1-1/8in
Finish Bare
250-10263 Remote Reservior Bracket
Short Remote M/C
260-10234 Tandem TM1 Master Cylinder
Bore 5/8in
260-10374 Compact Remote Flange Mount Master Cylinder
Bore 7/8in
Finish Black e-Coat
260-10375 Compact Remote Flange Mount Master Cylinder
Bore 1.00in
Finish Black e-Coat
260-11322 Proportioning Valve
GMStyle
w/ Delay (Metering Valve)
260-11866 Handlebar Master Cylinder
Right-Hand
Bore 1/2in
260-12114 Combination Master Cylinder
w/Small Reservoir
Bore 7/8in
260-12115 Combination Master Cylinder
w/Small Reservoir
Bore 1.00in
260-12389 Compact Remote Side Mount Master Cylinder
Bore 1-1/8in
Finish Black e-Coat
260-1876 Residual Pressure Valve
Finish Red
Size 10#
260-3881 Rebuild Kit
For 3/4in Combination M/C
260-5751 Reservoir
Remote Master Cylinder
10.7oz Reservoir
260-8556-BK Aluminum Tandem Master Cylinder
Bore 1-1/8in
Finish Black e-Coat
260-8794 Tandem Remote Master Cylinder
w/ Fixed Reservoirs
Bore 1.00in
Finish Bare
260-9439 Aluminum Tandem Master Cylinder
w/ Pushrod
Bore 7/8in
Finish Bare
260-10372 Compact Remote Flange Mount Master Cylinder
Bore 3/4in
Finish Black e-Coat
260-12627 Proportioning Valve
Knob Adjust
M10x1 BBF Inlet & Outlet
260-12900-P Aluminum Tandem Master
For Mustang
Bore 7/8in
Finish Media Burnished
260-3278 Residual Valve w/ Fittings
Finish Blue
Size 2#
260-3880 Rebuild Kit
For 5/8in Combination M/C
260-3883 Rebuild Kit
For 1in Combination M/C
260-4896 Rebuild Kit
For 1-1/16in Tandem M/C
260-6089 Compact Master Cylinder
Bore 3/4in
Finish Bare
250-3381 Remote Reservoir Mounting Bracket
260-10514 Rebuild Kit
For 3/4in Short Remote M/C
260-10515 Rebuild Kit
For 13/16in Short Remote M/C
260-12387 Compact Remote Side Mount Master Cylinder
Bore 7/8in
Finish Black e-Coat
260-12388 Compact Remote Side Mount Master Cylinder
Bore 1.00in
Finish Black e-Coat
260-12900 Aluminum Tandem Master
For Mustang
Bore 7/8in
Finish Bare
260-1304 Integral Reservoir Compact Master Cylinder
Bore 3/4in
Finish Bare
260-3378 Combination Remote Master Cylinder
Bore 1.00in
Finish Bare
260-3884 Rebuild Kit
For 1-1/8in Combination M/C
260-6898 Rebuild Kit
High Volume Aluminum M/C
Bore 3/4in
260-10371 Compact Remote Flange Mount Master Cylinder
Bore 5/8in
Finish Black e-Coat
260-10518 Rebuild Kit
For 1-1/8in Short Remote M/C
260-11179 Proportioning Valve
Knob Adjust
3/8-24 IF Combo w/ switch
260-11867 Handlebar Master Cylinder
Left-Hand
Bore 1/2in
260-11868 Handlebar Master Cylinder
Right-Hand
Bore 5/8in
260-11869 Handlebar Master Cylinder
Left-Hand
Bore 5/8in
260-12384 Compact Remote Side Mount Master Cylinder
Bore 5/8in
Finish Black e-Coat
260-12900-BK Aluminum Tandem Master
For Mustang
Bore 7/8in
Finish Black e-Coat
260-2414 Rebuild Ki
For 1-1/32" Tandem M/C
260-2636 Integral Reservoir Compact Master Cylinder
Bore 5/8in
Finish Bare
260-3376 Combination Remote Master Cylinder
Bore 7/8in
Finish Bare
260-5920 Combination Remote Master Cylinder
Bore 13/16in
Finish Bare
260-6088 Compact Master Cylinder
Bore .70in
Finish Bare
260-6579 Integral Reservoir Compact Master Cylinder
Bore .70in
Finish Bare
260-6764 High Volume Master Cylinder
Bore 3/4in
Finish Bare
260-6899 Rebuild Kit
High Volume Aluminum M/C
Bore 7/8in
260-7563 Tandem Remote Master Cylinder
w/ Remote Reservoirs
Bore 1.00in
Finish Bare
260-10205 Reservoir
Short Remote M/C
10oz Reservoir
260-10373 Compact Remote Flange Mount Master Cylinder
Bore 13/16in
Finish Black e-Coat
260-10500 Reservoir Kit
For Remote M/C, 4.0oz Reservoir
260-10517 Rebuild Kit
For 1in Short Remote M/C
260-11593 Master Cylinder Bleeding kit
260-11972 Compact Remote Aluminum Master Cylinder
Bore .813in
260-12385 Compact Remote Side Mount Master Cylinder
Bore 3/4in
Finish Black e-Coat
260-12386 Compact Remote Side Mount Master Cylinder
Bore 13/16in
Finish Black e-Coat
260-3372 Combination Remote Master Cylinder
Bore 5/8in
Finish Bare
260-3374 Combination Remote Master Cylinder
Bore 3/4in
Finish Bare
260-3882 Rebuild Kit
For 7/8in Combination M/C
260-4201 Handlebar Master Cylinder
Bore 5/8in
Finish Black e-Coat
260-4893 Tandem Master Cylinder
Bore 1-1/16in
Finish Anodized
260-5921 Rebuild Kit
For 13/16in Combination M/C
260-6087 Compact Master Cylinder
Bore 5/8in
Finish Bare
260-8555-P Aluminum Tandem Master Cylinder
Bore 1.00in
Finish Media Burnished
260-9439-P Aluminum Tandem Master Cylinder
w/ Pushrod
Bore 7/8in
Finish Media Burnished
260-10377 Motorcycle Forward Control Master Cylinder
Bore 5/8in
Finish Chrome
260-15096 GS Compact Integral Master Cylinder
Area 0.31
Bore 5/8in
Finish Black E-Coat
Stroke 1.25
Volume 0.39
260-15097 GS Compact Integral Master Cylinder
Area 0.38
Bore 0.7
Finish Black E-Coat
Stroke 1.25
Volume 0.48
260-15098 GS Compact Integral Master Cylinder
Area 0.44
Bore 3/4in
Finish Black E-Coat
Stroke 1.25
Volume 0.55
260-15088 GS Compact Remote Master Cylinder
Area 0.19
Bore 1/2in
Finish Black E-Coat
Stroke 1.25
Volume 0.24
260-15089 GS Compact Remote Master Cylinder
Area 0.31
Bore 5/8in
Finish Black E-Coat
Stroke 1.25
Volume 0.39
260-15090 GS Compact Remote Master Cylinder
Area 0.38
Bore 0.70
Finish Black E-Coat
Stroke 1.25
Volume 0.48
260-15091 GS Compact Remote Master Cylinder
Area 0.44
Bore 3/4in
Finish Black E-Coat
Stroke 1.25
Volume 0.55
260-15092 GS Compact Remote Master Cylinder
Area 0.52
Bore 13/16in
Finish Black E-Coat
Stroke 1.25
Volume 0.65

Product Description

Aluminum Tandem Master Cylinder
Wilwood’s tandem chamber master cylinders are fully machined from a High-pressure die casting of a premium alloy, it incorporates slotted mounting flange to accommodate mount centers between 3.22” to 3.40” and also features side-hole mounts on 6.40” centers. Master cylinder is has full separation between the front and rear chambers . Dual outlets allow for right or left hand plumbing based on mount location. Offers a total piston stroke of 1.10” and a 2:1 volume ratio between the primary and secondary chambers. Available in 7/8”, 1” or 1-1/8” bore sizes. Available also in a media burnished version and a black E-coat finished units.

Aluminum Tandem Master for Mustang
Wilwood’s tandem chamber master cylinders for early Mustangs are fully machined from a High-pressure die casting of a premium alloy, it incorporates slotted mounting flange to accommodate the correct mount centers used in 60’s and 70’s Ford vehicles These master cylinders is has full separation between the front and rear chambers necessary for redundancy and safety. Dual outlets allow for right or left hand plumbing based on mount location and also offers a total piston stroke of 1.10”, with a 2:1 volume ratio between the primary and secondary chambers. Available in 7/8” bore and OE style adjustable pushrod that allows interface with manual pedal assemblies. Available also in a media burnished version and a black E-coat finished units.

Compact Remote Combination Master Cylinder
Wilwood’s Compact Combination Master Cylinders have been designed for limited space applications requiring the output capacity of a full size master cylinder. The ultra short 3.37”compact body provides 2.16” of additional clearance between the mounting flange and the fluid outlet. A full 1.12” of piston stroke meets or exceeds the stroke capacity of most full size cylinders. With 1/8” NPT fluid outlet port located at the top radius of the cylinder bore, reduces the chances for trapped air. The black E-Coated aluminum body resists corrosion and maintains a durable long lasting finish.

Compact Remote Side Mount Master Cylinder
Wilwood’s Compact Combination (Side Mount) Master Cylinders have been designed for limited space applications requiring the output capacity of a full size master cylinder. The ultra short 3.37”compact body provides 2.16” of additional clearance between the mounting boss and the fluid outlet. The new body design incorporates integral side mounting lugs with a 3.00” center to distance and no traditional mounting flange, which further enhances its ability to mount in tight spaces. A full 1.12” of piston stroke meets or exceeds the stroke capacity of most full size cylinders. With 1/8” NPT fluid outlet port located at the top radius of the cylinder bore, reduces the chances for trapped air. Enhanced fluid inlet port allows mounting of the standard reservoir included in kit and also contain 11/16-20 internal threads for custom reservoir arrangements. The black E-Coated aluminum body resists corrosion and maintains a durable long lasting finish.

High Volume Master Cylinder
Wilwood High-Volume Aluminum Master feature high pressure die-cast bodies from high-grade aluminum. Wilwood. High-Volume Master Cylinders have the highest fluid capacity of any integral reservoir design. With a total capacity of 8.2 ounces, there is at least 26% more fluid volume than other brands. . With 1-7/16” of piston travel, it offers extra margin when used with large piston calipers. Heavy duty internal springs provide fast retraction. Formed steel lids with bellows type gaskets keep the fluid in and the moisture out. Wilwood master cylinders use common dimensions for flange or side mounting and a 1/8-27 NPT outlet port.

Integral Reservoir Compact Master Cylinder
This popular lightweight, compact design is used for clutch and small master cylinder requirements and is well known for its dependability. It incorporates an improved plastic screw-on filler cap which protects the fluid in the 1.4 ounce reservoir, and is available in all three bore sizes.

Compact Master Cylinder
Remote Reservoir Compact Master Cylinders are the perfect solution for club sport racers, small open wheel cars, or any other custom application where there is limited space for the master cylinder and fluid reservoir. Aluminum cylinders designed for use with either a detachable or remote fill reservoirs. Available in three bore sizes from .625” to .750” with a full 1.4” of stroke to accommodate short pedal ratios, small brake calipers, and hydraulic clutch actuation on space limited applications. Reservior kits with fittings are availble under part #’s 260-7577 (4.0 Oz.) or 260-8742 (10.0 oz)

Combination Remote Master Cylinder
Combination Remote Master Cylinders offer six different bore sizes and four different installation configurations that are available with this master cylinder kit. Precision machined from high strength aluminum, this kit includes both small and large size reservoirs which can be mounted directly on the master cylinder or remotely mounted for more convenient service access. Standard mounting bolt hole configurations provide easy applications for racing and off road vehicles, specialty cars, recreation and industrial vehicles.

Tandem Master Cylinder
Made from durable lightweight aluminum with a large capacity plastic reservoir and dual outlet bores, this master cylinder utilizes standard O.E.M. internal components. Standard factory mounting bolt holes can be adapted to racing pedal assemblies with an optional mounting adapter bracket (including push rod and dust boot, see diagram below). This lightweight (2.5 pounds) reliable master cylinder is used for Drag Racing, Late Model Stock Cars, Street Rod and Off Road applications.

Tandem Remote Master Cylinder
Wilwood’s Remote Tandem master cylinders provide one of the safest ways to actuate four wheel or dual caliper axle brake systems. The cylinder features 50/50 output from a 1.00” bore with 1.10” stroke. This master cylinder can be bolted directly to Wilwood’s single mount pedals. The kit is shipped complete with the master cylinder, pre-installed 4 ounce reservoirs and 3.38” x 5/16-24 pushrod.

Go Kart Master Cylinder
This super lightweight (only .55 pounds) 1/2” bore aluminum master cylinder designed specifically for Kart and Jr. Dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring. The assembly comes ready to install and includes billet bracket, lockwired drilled hardware and fluid line fitting. The unit is best utilized in conjunction with Wilwood’s Kart / Jr. Dragster caliper.

Handlebar Master Cylinder
Wilwood’s 5/8” bore Right Hand Handlebar Master Cylinder is compact, lightweight and specifically designed for a variety of recreational, sport and outdoor equipment applications. Constructed of materials and finishes designed to resist corrosion, our master cylinder fits standard 7/8” diameter handlebars and is also available with matching L/H units. Impact resistant lever assembly comes with a three-position hydraulic parking brake lock. The housing is designed to accept a threaded brake light switch (1/4-32). The large capacity reservoir is translucent for easy fluid level viewing. The fluid inlet accepts an M10 × 1 thread, Banjo type fitting.

Kart Master Cylinder (RM1)
Replacement cylinder assembly for Wilwood’s Kart master Cylinder. Easy bolt on replacement onto your existing bracket assembly.

Motorcyle Foot Pedal Master Cylinder
Wilwood’’s Right Hand Motorcycle Foot Pedal Master cylinder comes with show chrome finished body and lid. Constructed of billet aluminum, this forward control master cylinder comes with an industry standard 5/8” bore and 3/8-24 threaded outlet with relieved area for banjo fitting seal. Side mounting holes are 2.25” apart.

TM1 5/8 Tandem Master Cylinder
The TM1 master cylinder is manufactured from lightweight aluminum with a 5/8” bore and dual 10mm x 1.00 outlets. Side mounting on 3.53” bolt spacing using 5/16” bolts, it’s compact design is perfect for applications where space is limited. Includes push rod, dust boot and a permanent mount .39” diameter clevis. An alternative 5/16-24” threaded pushrod is available under part # 230-7134. Remote reservoir kits are available under part # 260-11098.

Slave Cylinder
This “Pull Type” slave cylinder is made from billet aluminum for high strength and plated with a tough anti-corrosion finish. The stainless steel push rod has a longer stroke than most cylinders assuring a full release of the clutch. Ideal for Drag Racing, Late Model Stock, Pro Series and Off Road applications. Recommended master cylinder sizing is ¾”.

Product Reviews

Be the first to review this item.

Rating
Title
Review