Wilwood 290-8478 EXP 600 Plus Racing Brake Fluid
EXP600 PLUS Brake Fluid
EXP 600 Plus is a highly refined blend
developed for extreme performance under the high heat and extreme
pressure of professional motorsports.EXP
600 Plus has tested to 626 degrees Fahrenheit with a wet boiling
point of 417 degrees Fahrenheit. These numbers far exceed any
DOT or SAE
specifications.
It is true that racing fluids need to have high boiling points.
It is also true that fluids need to have low moisture affinity to
slow the natural absorption rate of water vapor. But the true test
of any fluid is how well it resists aeration and compressibility
after it has been heated and pressure cycled a few hundred times.
The real test is at the track. EXP has
been proven to maintain firm pedal feel and quick response, long
after others have failed.
HI-TEMP Brake Fluid
Wilwood?s specially formulated Hi-Temp? 570 Racing Brake Fluid has
a minimum 570? F. dry boiling point of to withstand the severe heat
requirements of automotive racing. Hi-Temp? 570?s low viscosity
allows easy bleeding of your brake system, eliminating aeration of
the brake fluid caused by foaming due to excessive pumping of the
pedal.
Hi-Temp? 570 comes in convenient 12 ounce containers
hermetically sealed to guarantee against unwanted absorption of
moisture which can drastically lower the fluids boiling point
(fluid from larger containers tends to become contaminated with
moisture, lowering its boiling point and making it unsuitable for
racing applications.
Wilwood Five Brake Fluid
Wilwood FIVE is a highly refined silicone
brake fluid, formulated to preserve the looks and reliability on
classic vehicles and show cars. Its non-hygroscopic blend blocks
moisture absorption to inhibit internal system corrosion. It is
paint friendly and will not harm most custom finishes should a
spill or leak occur.
Wilwood FIVE provides superior
lubrication for all brake system wear surfaces with long life from
the master cylinder and caliper pistons, bores, and seals. It is a
fully DOT 5 compliant fluid meeting or
exceeding FMVSS 116 and MIL-PRF-46176B-DOT specifications, and can be used in any vehicle
that is OE specified for DOT 5 use. Wilwood does not recommend using
DOT 5 fluid in any racing
applications.
Assembly Lube Description
Wilwood?s specially formulated Synthetic Assembly Lubricant is
designed to be used on pistons and rubber components when
overhauling brake calipers, wheel cylinders and master cylinders
for maximum protection and performance.
Comes in a convienient 4oz bottle size, with applicator tip.
Also available in a case of 12 ? 4oz bottles.
