Brake Fluid & Assembly Lube P.O.P. Display
EXP600 PLUS Brake
Fluid
EXP 600 Plus is a highly refined blend developed for
extreme performance under the high heat and extreme pressure of
professional motorsports.EXP 600 Plus has tested to
626 degrees Fahrenheit with a wet boiling point of 417 degrees
Fahrenheit. These numbers far exceed any DOT or
SAE specifications.
It is true that racing fluids need to have high boiling points.
It is also true that fluids need to have low moisture affinity to
slow the natural absorption rate of water vapor. But the true test
of any fluid is how well it resists aeration and compressibility
after it has been heated and pressure cycled a few hundred times.
The real test is at the track. EXP has been proven to
maintain firm pedal feel and quick response, long after others have
failed.
HI-TEMP Brake
Fluid
Wilwoods specially formulated Hi-Temp 570 Racing Brake Fluid has a
minimum 570 F. dry boiling point of to withstand the severe heat
requirements of automotive racing. Hi-Temp 570s low viscosity
allows easy bleeding of your brake system, eliminating aeration of
the brake fluid caused by foaming due to excessive pumping of the
pedal.
Hi-Temp 570 comes in convenient 12 ounce containers hermetically
sealed to guarantee against unwanted absorption of moisture which
can drastically lower the fluids boiling point (fluid from larger
containers tends to become contaminated with moisture, lowering its
boiling point and making it unsuitable for racing applications.
Wilwood Five Brake Fluid
Wilwood FIVE is a highly refined silicone brake fluid,
formulated to preserve the looks and reliability on classic
vehicles and show cars. Its non-hygroscopic blend blocks moisture
absorption to inhibit internal system corrosion. It is paint
friendly and will not harm most custom finishes should a spill or
leak occur.
Wilwood FIVE provides superior lubrication for all
brake system wear surfaces with long life from the master cylinder
and caliper pistons, bores, and seals. It is a fully
DOT 5 compliant fluid meeting or exceeding
FMVSS 116 and
MIL-PRF-46176B-DOT
specifications, and can be used in any vehicle that is
OE specified for DOT 5 use. Wilwood does
not recommend using DOT 5 fluid in any racing
applications.
Assembly Lube Description
Wilwoods specially formulated Synthetic Assembly Lubricant is
designed to be used on pistons and rubber components when
overhauling brake calipers, wheel cylinders and master cylinders
for maximum protection and performance.
Comes in a convienient 4oz bottle size, with applicator tip.
Also available in a case of 12 4oz bottles.