SPC Performance Caster/Camber Sleeve; Reqr's 1 per Wheel FORD BRONCO


Images May Not be Vehicle Specific. For Display Purposes Only.

Images Of This Specific Part Number

Non-Specific Images

Place Order Here

Part #: 23101
Notes: Caster/Camber Sleeve
Reqr's 1 per Wheel
Please contact us for pricing & more information.

Specs

Position Front
Range ±.25deg Camber/Cas

This Item Also Available In

Part Number Price Notes & Specs
23108 $0.00 Notes Caster/Camber Sleeve
Reqr's 1 per Wheel
Position Front
Range ±2.0deg Camber/Cas
23104 $0.00 Notes Caster/Camber Sleeve
Reqr's 1 per Wheel
Position Front
Range ±1.0deg Camber/Cas
23112 $0.00 Notes Caster/Camber Sleeve
Reqr's 1 per Wheel
Position Front
Range ±2.50deg Camber/Cas
23102 $0.00 Notes Caster/Camber Sleeve
Reqr's 1 per Wheel
Position Front
Range ±.50deg Camber/Cas
23106 $0.00 Notes Caster/Camber Sleeve
Reqr's 1 per Wheel
Position Front
Range ±1.50deg Camber/Cas
23107 $0.00 Notes Caster/Camber Sleeve
Reqr's 1 per Wheel
Position Front
Range ±1.75deg Camber/Cas
23100 $0.00 Notes Caster/Camber Sleeve Kit
Set of 9 23100 Series
Includes 23101-23109
Reqr's 1 per Wheel
Position Front Radius Arm To Frame
Range ±.25 to ±2.75deg Camber/Cas
23105 $0.00 Notes Caster/Camber Sleeve
Reqr's 1 per Wheel
Position Front
Range ±1.25deg Camber/Cas
23111 $0.00 Notes Caster/Camber Sleeve
Reqr's 1 per Wheel
Position Front
Range ±2.25deg Camber/Cas
23103 $0.00 Notes Caster/Camber Sleeve
Reqr's 1 per Wheel
Position Front
Range ±.75deg Camber/Cas
23113 $0.00 Notes Caster/Camber Sleeve
Reqr's 1 per Wheel
Position Front
Range ±2.75deg Camber/Cas
23109 $0.00 Notes Caster/Camber Sleeve
Reqr's 1 per Wheel
Position Front
Range 0.0deg Camber/Cas

All Fitments

FORD
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1980 - 1996 BRONCO ALL ALL ALL ALL ALL ALL 4WD;
1980 - 1996 F-150 ALL ALL ALL ALL ALL ALL 4WD;
1980 - 1998 F-250 ALL ALL ALL ALL ALL ALL 4WD;
1980 - 1997 F-350 ALL ALL ALL ALL ALL ALL 4WD;

Product Description

4WD CAM/CAS SLEEVES
Change camber, caster, or both on twin traction beam Dana 44s with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 to determine the change needed, then install the correct sleeve. To split camber and caster adjustment, rotate sleeve 45°.

TIE ROD ADJUSTER SLEEVES
These adjustable hex shaped sleeves replace the round tie rod sleeve to assure ease of adjustment without slippage. Recommended when the existing sleeve is damaged or when replacing a tie rod end for easy adjustment.

Product Reviews

Be the first to review this item.

Rating
Title
Review