Questions? Feedback? powered by Olark live chat software

92004 - SPC Race Style Upper Control Arm - Build Your Own

This part should fit your vehicle. It is a universal part.

Images May Not be Vehicle Specific. For Display Purposes Only.

Images Of This Specific Part Number

Non-Specific Images

Place Order Here

Part #: 92004
Notes: Build Your Own Control Arm
Ball Joint Plate
Full Size GM Bolt In Plate
Use w/ Ball Joint 94004 Standard
MSRP: $36.71
Your Price: $20.26

This Item Also Available In

Part Number Price Notes & Specs
92002 $25.76 Notes Build Your Own Control Arm
Ball Joint Plate
Chrysler Screw In Plate
Use w/ Ball Joint 94002
Angle 10deg
92003 $25.76 Notes Build Your Own Control Arm
Ball Joint Plate
Chrysler Screw In Flat Plate
Use w/ Ball Joint 94002
Angle 0deg
92005 $8.51 Notes Build Your Own Control Arm
UCA End Pivot Stud (Cross Shaft End)
92006 $20.26 Notes Build Your Own Control Arm
Ball Joint Plate
Midsize GM Metric Bolt In Plate
Use w/ Ball Joint 94006 Standard, 94017 Extended
Angle 0deg
92007 $29.64 Notes Build Your Own Control Arm
Ball Joint Plate
GM Tri 5 Bolt In Plate
Use w/ Ball Joint 94003
92008 $29.64 Notes Build Your Own Control Arm
Ball Joint Plate
Midsize GM Metric Bolt In Plate
Use w/ Ball Joint 94006 Standard / 94017 Extended
Angle 20deg
Position Left
92009 $29.64 Notes Build Your Own Control Arm
Ball Joint Plate
Midsize GM Metric Bolt In Plate
Use w/ Ball Joint 94006 Standard / 94017 Extended
Angle 20deg
Position Right
92010 $0.55 Notes Build Your Own Control Arm
Right Hand Jam Nut
Size 3/4in - 16
92011 $0.82 Notes Build Your Own Control Arm
Left Hand Jam Nut
Size 3/4in - 16
92013 $8.51 Notes Build Your Own Control Arm
Pivot Plate Stud w/Nut
92014 $0.34 Notes Build Your Own Control Arm
Offset Pivot w/Bushing
92019 $0.55 Notes Build Your Own Control Arm
Lock Nut for 92014
92021 $39.91 Notes Build Your Own Control Arm
Race Kit
Threaded studs, lock nuts, bolts, jam nuts, offset pivots
w/ Delrin Insert
Includes 2 Each
92025 $10.33 Notes Build Your Own Control Arm
Racing Pivots
Material Delrin
92040 $6.76 Notes Build Your Own Control Arm
Adjusting Sleeve
Length 3-3/4in
Material Steel
92045 $10.88 Notes Build Your Own Control Arm
Adjusting Sleeve
Length 4in
Material Aluminum
92050 $8.56 Notes Build Your Own Control Arm
Adjusting Sleeve
Length 5in
Material Steel
92055 $11.81 Notes Build Your Own Control Arm
Adjusting Sleeve
Length 5in
Material Aluminum
92060 $10.33 Notes Build Your Own Control Arm
Adjusting Sleeve
Length 6in
Material Steel
92065 $12.99 Notes Build Your Own Control Arm
Adjusting Sleeve
Length 6in
Material Aluminum
92080 $10.33 Notes Build Your Own Control Arm
Adjusting Sleeve
Length 8in
Material Steel
92090 $10.33 Notes Build Your Own Control Arm
Adjusting Sleeve
Length 9in
Material Steel
93400 $52.28 Notes Build Your Own Control Arm
Cross Shaft
Shaft Hole Spacing 5in
Shaft Material Steel
93410 $41.35 Notes Build Your Own Control Arm
Cross Shaft
Shaft Hole Spacing 5-1/2in
Shaft Material Steel
93420 $41.35 Notes Build Your Own Control Arm
Cross Shaft
Shaft Hole Spacing 5-7/8in to 6in
Shaft Material Steel

All Fitments

UNIVERSAL
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
0 - 0 NON APPLICATION SPECIFIC ALL ALL ALL ALL ALL ALL

Product Description

These fully adjustable, rugged arms are recommended for circle track, road racing and drag applications. They allow the user to adjust the arm length and offset to attain the ultimate suspension geometry required to reach the winner’s circle. Each arm can be adjusted up to 2” in length and all components are interchangeable and may also be ordered separately.

Step Number 1
Measure Cross Shaft Bolt Hole Spacing From Center-To-Center

Step Number 2
Measure Length of Control Arm – Measure from the middle of the cross shaft to the center of the ball joint.

Step Number 3
Determine Type of Ball Joint Plate

  • Full Sized GM Truck Bolt In Ball Joint Plate Measure center-to-center between the ball joint bolt holes that are farthest apart. This measurement should be 2-3/4” SPC Ball Joint part number is 92004.
  • GM Metric (Midsized) Bolt In Ball Joint Plate Measure center-to-center between the ball joint bolt holes that are farthest apart. This measurement should be 2-1/2” – SPC Ball Joint part #92006. Also in 20° – SPC Ball Joint part #92008 & 92009.
  • Chrysler Screw In Ball Joint Plate – SPC Performance offers ball joint plates that are welded flat (0°- SPC part #92003) or at an angle (10°- SPC part #92002) for these screw in type ball joints.

Product Reviews

Be the first to review this item.

Rating
Title
Review