QA1 Rear Coilover Mount Kit FORD MUSTANG
Images May Not be Vehicle Specific. For Display Purposes Only.
Place Order Here
Part #: RK100K
Notes: Rear Coilover Mount Kit
Your Price: $166.52
|1979 - 2004
QA1 has a variety of shock mount accessories to fit your needs.
QA1 T-Bar Kits
QA1’s T-Bar Kits are designed to convert loop type QA1 adjustable shocks to T-bar mounts. Loop must be utilizing QA1 3/4” I.D. bushing.
QA1 Lower Shock Bolt Kit
Use with the following part numbers to eliminate or minimize vehicle modifications: TD403, TS403, TR403, TD504, TS504, TD703, TS703, TD801, TS801, TD802, TS802, TD901, TS901, TD902, TS902.
Each of these shocks, except for the TD901 and TS901, requires a bushing (part #9032-102) to use the Lower Shock Bolt Kit.
QA1 One-Piece Bushings
QA1 offers a one-piece bushing for your suspension component needs.
QA1 Bushing Kit
QA1 offers two bushing kits for our drag racing, street performance and street rod shocks.
- Part #B6031K
This kit consists of (2) two-piece urethane bushings, (2) 1/2” sleeves, and (2) 5/8” sleeves to fit on a Proma Star, Ultra Ride, Aluma Matic or Pro Coil System shock. Order (1) per shock.
- Part #B6250K
This bushing kit includes (2) two-piece bushings. For use with Streeters shocks. Order (1) per shock.
Complete Adjustable Shock Mount Kit
QA1 has a complete adjustable shock mount kit available that makes converting from one shock length to another a snap! For all QA1 drag racing, street performance and street rod adjustable shocks.
QA1 Bearing Kits
QA1 offers bearing kits with a variety of options, including steel or Nylon/PTFE race and different inner and outer diameters and width.
Stud Top Bushing Kits
QA1 offers a Stud Top Bushing Kit with shock mounting hardware for 5/8” and 7/8” openings. Fits QA1 stud top shocks.
QA1 Bump Stops
QA1’s Bump Stops can help cushion your suspension and prevent it from bottoming out. Part #BC02 can be shortened to desired length.
QA1 Aluminum Shock Extensions
QA1’s Aluminum Shock Extensions can give you a little more length if needed in your custom application. With 1 or 2 inch lengths and 9/16 or 1/2 inch thread sizes, you are sure to find one that will fit your needs.
Note: For all Drag & Street aluminum eyelet shocks and for some stud top shocks. For stud top shock compatibility, contact QA1.
QA1 offers a variety of sleeve kits to meet your needs.
- SLV750 Sleeve Kit
This kit allows for variations in mounting stud sizes when utilizing QA1 3/4” I.D. x 1 1/4” wide bushings.
- SLV625 Sleeve Kit
This kit allows for variations in mounting stud sizes when utilizing QA1 5/8” I.D. x 1 1/4” wide poly bushings.
QA1 Mounting Tabs
QA1 offers a quality line of tabs for mounting shocks and other miscellaneous accessories. Mounting brackets are sold in kit form, including (4) tabs, (2) bolts and (2) nuts.
- Part #TB101GBK
Small tab: 1/2” mounting hole, boxed tubing; bottom of tab to center of bolt is 1 1/4”.
- Part #TB102GBK
Large tab: 1/2” mounting hole, boxed tubing; bottom of tab to center of bolt is 1 3/4”.
- Part #TB103GBK
Large tab: 1/2” mounting hole, 1 5/8” round tubing offset bracket; bottom of tab to center of bolt is 1 3/4”.