QA1 Precision Products MU2TCA Pro-Comp Control Arms
QA1 offers a variety of upper and
lower control arms for Mustangs, Camaros, GM A-Bodies and MOPARs. QA1?s Tubular Control Arms reduce unsprung weight
while improving weight distribution in race applications.
Mustang Tubular Control Arms
Eco-Comp Control Arms
The Eco-Comp Control Arms are an economical choice in tubular arms
for use on the strip. They are built with QA1?s exclusive compressed rubber bushings and
engineered for performance. The Eco-Comps offer value without
sacrificing performance.
Pro-Comp Control Arms
The QA1 Pro-Comp Control Arms are the
ultimate in adjustability, design and strength. These arms utilized
QA1?s exclusive XM series rod ends. These chromoly, heat-treated rod
ends use QA1?s exclusive
Nylon/PTFE lining for superior
performance and durability, Included in the control arm kit are
spacers to allow movement of the arms forward and rearward for the
wheel base adjustment.
QA1 tubular control arms require the
use of QA1 coil-over struts and
QA1 caster/camber plates.
Each kit comes with 1 left control arm and 1 right control
arm.
Control Arms for Mopar A-Body, B-Body &
E-Body
Stronger than the factory control arms without adding any
weight!
Upper Control Arms
Ready to bolt on control arm sets for your Mopar. They feature
tubular construction, black powder coat and polyurethane inner
pivot bushings. These upper control arms increase caster by
approximately 3 degrees. Each set comes with ball joints.
Note: Part #52301 is only for factory cars and
any A-Body that was swapped to disc brakes with factory parts
(large ball joint).
Lower Control Arms
QA1 offers Mopar A, B and E-Body Control
Arms with sway bar tabs. These lower control arms are a direct
bolt-in on your factory k-member. The set includes bushings, pivot
arms and nuts for ease of installation.
Note: Part #52307 is designed to work with the
1964-1966 A-Body with no sway bar and the 1967-1973 A-Body with the
1973-1976 sway bar or ?flat bar.?
Part #52308 is designed to work with the E-Body sway bar and the
1970 and up B-Body sway bar.
Control Arms for GM A, G and
F-Body
Available for A, G and F-Body vehicles, QA1?s GM control arms are
available in race and street configurations making them a great
choice for any application. These control arms also feature
interchangeable mounts allowing you to use either QA1 coil-over shocks or factory shocks and
springs.*
The race arms utilize a QA1 Low
Friction Ball Joint and Delrin pivot bushings, providing added
performance for drag racing, pro-touring and hard core street
applications. The street arms use a factory replacement ball joint
and polyurethane pivot bushings, making them great for vehicles
used primarily for cruising or long stance events.
GM A, G and F-Body Upper
Control Arms
QA1?s A, G and F-Body upper control arms
feature powder coated tubular construction for increased strength
and great looks. The offset cross shafts allow for easy camber
adjustment and adds approximately 2-3 degrees of caster and 0.5-1
degree of negative camber.
GM A, G and F-Body Lower
Control Arms
QA1?s A, G and F-Body lower control arms
feature powder coated tubular construction for increased strength
and great looks. A new sway bar link is also included. The 3rd
Generation arms add approximately 1.5 degrees of caster and 1
degree of negative camber adjustment.
*Part number 52312 is only for use with QA1?s Pro Coil Systems, and can not use the
interchangeable mount.
Each kit comes with 1 left control arm and 1 right control
arm.