Universal Gauge Harness
If you want to keep your under-dash area organized or you think that you need to remove gauges from time to time then you need to install our universal gauge harness. It will connect all major brand gauges including Auto Meter and VDO and works with most dash layouts and sizes. Harness includes wiring for turn signals and high beam indicator light.
GM Column & Dimmer Switch Pigtail
Original factory connectors to replace worn out or damaged connectors for early GM keyed steering columns. GM color-coded wires are ready to connect into your existing harness. Includes: two keyed ignition switch pigtails, one turn signal pigtail with two connectors; one dimmer switch pigtail. Wire length: 12 Inches.
GM Column Installation Kit
All the plugs and terminals for your early GM keyed steering column in one kit. Contains two ignition switch connectors, two turn signal connectors and one dimmer switch connector and terminals for each.
Universal Integrated Turn Signal Kit
A common problem faced by rodders and kit car builders is where to mount the turn signal switch since many aftermarket steering columns are not designed to accommodate the necessary wiring and switches. Problem solved with this new Integrated Turn Signal Kit from Painless. The toggle switches for both turn signals and hazards can be mounted anywhere. Because the kit is designed to be an integrated system, turn signals will work in conjunction with brake lights.
Headlight Switch with Plastic Knob – A
Four position; off, park, low beam and high beam.
Headlight Switch with Aluminum Knob – B
3 position; dash light dim, no dome light control.
Dimmer Switch – C
GM type foor mounted dimmer
Universal Ignition Switch – D
Dash mounted ignition switch w/two keys.
Headlight Switch with GM Style Black Knob – E
80152 – 3 position; dash light dim and dome light control.
Replacement Headlight Switch kit – F
3 position headlight switch, a floor mounted dimmer, and two GM style grounding door jam switches.
Replacement Switch Kit – G
One 3 position headlight switch, one floor mounted dimmer, two GM style grounding door jam switches, and one universal ignition switch with keys.
Push Button Starter Switch – H
UniversalWindshieldWiper Switch – I
Three position switch operates 2-speed wiper motor with on-off and washer function.
Hydraulic Brake Light Switch – J
1/8” Pipe thread fitting. 60 -80 PSI
Brake Light Switches – K
2 Terminal switch #80176 – 4 Terminal switch
Low Pressure Brake Light Switch – L
Comes complete w/plug-in pigtail.1/8” pipe thread. (Activates at approx 25lbs. pressure)
Magnetic Door Jamb Switch Kit
Turn dome lights on and off without unsightly switches mounted on door frame. A magnet mounted on the door activates a reed switch mounted in the post for a clean look and smooth operation. Choose ground activation (ground wire to the dome light) or power activation (power wire to the dome light.)
Jamb TacWireless Contact Kits
Jamb Tac keeps door jambs looking neat and free from wires. These heavy duty solid brass contacts handle up to 60 amps per circuit.
Mounts anywhere in the doorjamb. Kits are complete with connectors, instructions and mounting template. (Note that opening the door breaks contact – your power windows, door locks or speakers will not operate with the door open).
GM Style Jamb Switch