NTK OE Type 5-Wire Wideband A/F Sensor PORSCHE 911


Images May Not be Vehicle Specific. For Display Purposes Only.

Images Of This Specific Part Number

Non-Specific Images

Place Order Here

Part #: 24343
Notes: OE Type 5-Wire Wideband A/F Sensor
Please contact us for pricing & more information.

Specs

Meets or Exceeds Original Equipment Manufacture Specifications Yes
Mounting Bracket Included No
Sensor Type Heated
Thread Diameter 0.709
Thread Length 0.38
Universal Or Specific Fit Specific
Wire Harness Length 28.5
Wire Quantity 5

All Fitments

AUDI
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2007 - 2008 RS4 ALL V8 4.2 ALL ALL ALL Position: Upstream; Cyls. 1-4
PORSCHE
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2006 - 2006 911 ALL H6 3.6 ALL ALL ALL Position: Upstream Left
2006 - 2006 911 ALL H6 3.6 ALL ALL ALL Position: Upstream Right
2006 - 2008 911 ALL H6 3.8 ALL ALL ALL Position: Upstream Left
2006 - 2008 911 ALL H6 3.8 ALL ALL ALL Position: Upstream Right
2007 - 2007 911 ALL H6 3.6 T ALL ALL Position: Upstream Left; M97.70 Eng
2007 - 2007 911 ALL H6 3.6 T ALL ALL Position: Upstream Right; M97.70 Eng
2007 - 2008 911 ALL H6 3.6 N ALL ALL Position: Upstream Left; M96.05 Eng
2007 - 2008 911 ALL H6 3.6 N ALL ALL Position: Upstream Right; M96.05 Eng
2008 - 2009 911 ALL H6 3.6 T ALL ALL Position: Upstream Left; M97.70 & M97.70S Engs
2008 - 2009 911 ALL H6 3.6 T ALL ALL Position: Upstream Right; M97.70 & M97.70S Engs
2011 - 2011 911 ALL H6 3.6 T ALL ALL Position: Upstream Left
2011 - 2011 911 ALL H6 3.6 T ALL ALL Position: Upstream Right

Product Description

Oxygen (O2) Sensors are used in modern automobiles to control the fuel and ignition systems to optimize a car’s performance in the areas of emissions and fuel economy. Sensors are located before and after the catalytic converter to check on the amount of oxygen in the exhaust. The sensor sends signals to the car’s on-board computer, which then can adjust several variables, including air/fuel ratio and timing, in order to bring the engine into the optimum operating range.

Each NTK Oxygen (O2) Sensor is:

  • Extensively Tested During Manufacture to Guarantee Quality and Reliability
  • Supplied With a Factory-Fitted OEM Connector for Easy Installation
  • Precision manufactured with a sensing element incorporating NTK’s premier technical ceramics

Oxygen (O2) Sensors should be tested at each tune-up. Failed or worn out oxygen sensors can cause:

  • Failed Emission Tests
  • Increased Fuel Consumption
  • Failed Catalytic Converters
  • Poor Driveability
  • Increased Emissions

Product Reviews

Be the first to review this item.

Rating
Title
Review