MagnaFlow Universal Catalytic Converter; Heavy Metal Grade; Meets Federal Requirements; Excl California Models VOLKSWAGEN CABRIO


Images May Not be Vehicle Specific. For Display Purposes Only.

Images Of This Specific Part Number

Non-Specific Images

Place Order Here

Part #: 99355HM
Notes: Universal Catalytic Converter
Heavy Metal Grade
Meets Federal Requirements
Excl California Models
MSRP: $147.42
Your Price: $113.92
Free Shipping

Specs

Body Length 11
Body Width 4.25
California Air Resources Board Approved No
Catalytic Converter Air Tube Adapter Not Air Tube Kit Adaptable
Catalytic Converter Body Material Stainless
Catalytic Converter Format Pre-Catalytic Converter and Main Catalytic Converter
Catalytic Converter Overall Length 15
Catalytic Converter Oxygen Sensor Location Midbed
Inlet Inside Diameter 2.25
Main Piping Diameter 2.25
Material Stainless
Outlet Outside Diameter 2.25
Recommended Use Converter
Substrate Material Ceramic

All Fitments

ACURA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2002 - 2006 RSX ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2002 - 2006 RSX ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
AUDI
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2002 - 2004 A4 ALL V6 3.0 ALL ALL ALL Position: Left; For Federal Models; Automatic Trans; Cutting & Welding Required During Installation
2002 - 2004 A4 ALL V6 3.0 ALL ALL ALL Position: Left; For Non-California Models; Automatic Trans; Cutting & Welding Required During Installation
2002 - 2004 A4 ALL V6 3.0 ALL ALL ALL Position: Right; For Federal Models; Automatic Trans; Cutting & Welding Required During Installation
2002 - 2004 A4 ALL V6 3.0 ALL ALL ALL Position: Right; For Non-California Models; Automatic Trans; Cutting & Welding Required During Installation
2002 - 2003 A4 QUATTRO ALL V6 3.0 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2002 - 2003 A4 QUATTRO ALL V6 3.0 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2002 - 2003 A4 QUATTRO ALL V6 3.0 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2002 - 2003 A4 QUATTRO ALL V6 3.0 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2004 - 2004 A4 QUATTRO AVANT V6 3.0 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2004 - 2004 A4 QUATTRO AVANT V6 3.0 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2004 - 2004 A4 QUATTRO AVANT V6 3.0 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2004 - 2004 A4 QUATTRO AVANT V6 3.0 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2004 - 2004 A4 QUATTRO BASE V6 3.0 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2004 - 2004 A4 QUATTRO BASE V6 3.0 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2004 - 2004 A4 QUATTRO BASE V6 3.0 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2004 - 2004 A4 QUATTRO BASE V6 3.0 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2004 - 2004 A4 QUATTRO CABRIOLET V6 3.0 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2004 - 2004 A4 QUATTRO CABRIOLET V6 3.0 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2004 - 2004 A4 QUATTRO CABRIOLET V6 3.0 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2004 - 2004 A4 QUATTRO CABRIOLET V6 3.0 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2002 - 2004 A6 ALL V6 3.0 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2002 - 2004 A6 ALL V6 3.0 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2002 - 2004 A6 ALL V6 3.0 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2002 - 2004 A6 ALL V6 3.0 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2002 - 2004 A6 QUATTRO ALL V6 3.0 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2002 - 2004 A6 QUATTRO ALL V6 3.0 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2002 - 2004 A6 QUATTRO ALL V6 3.0 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2002 - 2004 A6 QUATTRO ALL V6 3.0 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
CHRYSLER
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2005 - 2007 300 ALL V6 2.7 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2005 - 2007 300 ALL V6 2.7 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2005 - 2007 300 ALL V6 2.7 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2005 - 2007 300 ALL V6 2.7 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2005 - 2007 300 ALL V6 3.5 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2005 - 2007 300 ALL V6 3.5 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2005 - 2007 300 ALL V6 3.5 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2005 - 2007 300 ALL V6 3.5 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2001 - 2004 TOWN & COUNTRY ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2001 - 2004 TOWN & COUNTRY ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2001 - 2003 VOYAGER ALL L4 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2001 - 2003 VOYAGER ALL L4 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
DODGE
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2001 - 2004 CARAVAN ALL L4 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2001 - 2004 CARAVAN ALL L4 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2007 - 2007 CHARGER BASE V6 2.7 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2007 - 2007 CHARGER BASE V6 2.7 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2007 - 2007 CHARGER BASE V6 2.7 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2007 - 2007 CHARGER BASE V6 2.7 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2007 - 2007 CHARGER SE V6 2.7 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2007 - 2007 CHARGER SE V6 2.7 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2007 - 2007 CHARGER SE V6 2.7 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2007 - 2007 CHARGER SE V6 2.7 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2001 - 2004 GRAND CARAVAN ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2001 - 2004 GRAND CARAVAN ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2005 - 2007 MAGNUM SE V6 2.7 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2005 - 2007 MAGNUM SE V6 2.7 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2005 - 2007 MAGNUM SE V6 2.7 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2005 - 2007 MAGNUM SE V6 2.7 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2000 - 2001 NEON ALL L4 2.0 ALL ALL ALL For Federal Models; Federal Emission TLEV Level with 2in Outlet
2000 - 2001 NEON ALL L4 2.0 ALL ALL ALL For Non-California Models; Federal Emission TLEV Level with 2in Outlet
2006 - 2007 RAM 1500 ALL V8 5.7 ALL ALL ALL For Federal Models; Except Solid Front Axle
2006 - 2007 RAM 1500 ALL V8 5.7 ALL ALL ALL For Non-California Models; Except Solid Front Axle
FORD
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1997 - 1998 F-250 ALL V8 5.4 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
1997 - 1998 F-250 ALL V8 5.4 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
1997 - 1998 F-250 ALL V8 5.4 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
1997 - 1998 F-250 ALL V8 5.4 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2000 - 2004 FOCUS ALL L4 2.0 ALL ALL ALL For Federal Models; Automatic Trans; w/ 3 Engine VIN; Cutting & Welding Required During Installation
2000 - 2004 FOCUS ALL L4 2.0 ALL ALL ALL For Non-California Models; Automatic Trans; w/ 3 Engine VIN; Cutting & Welding Required During Installation
1999 - 2003 MUSTANG ALL V8 4.6 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
1999 - 2003 MUSTANG ALL V8 4.6 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
1999 - 2003 MUSTANG ALL V8 4.6 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
1999 - 2003 MUSTANG ALL V8 4.6 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
1999 - 2004 MUSTANG ALL V6 3.8 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
1999 - 2004 MUSTANG ALL V6 3.8 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
1999 - 2004 MUSTANG ALL V6 3.8 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
1999 - 2004 MUSTANG ALL V6 3.8 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2004 - 2004 MUSTANG ALL V6 3.9 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2004 - 2004 MUSTANG ALL V6 3.9 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2004 - 2004 MUSTANG ALL V6 3.9 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2004 - 2004 MUSTANG ALL V6 3.9 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2005 - 2010 MUSTANG ALL V6 4.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2005 - 2010 MUSTANG ALL V6 4.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
HONDA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2002 - 2005 CIVIC ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2002 - 2005 CIVIC ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2002 - 2006 CR-V ALL L4 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2002 - 2006 CR-V ALL L4 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2003 - 2004 PILOT ALL V6 3.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2003 - 2004 PILOT ALL V6 3.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2006 - 2009 S2000 ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2006 - 2009 S2000 ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
JEEP
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2002 - 2003 LIBERTY ALL V6 3.7 ALL ALL ALL Position: Front Left; For Federal Models; Cutting & Welding Required During Installation
2002 - 2003 LIBERTY ALL V6 3.7 ALL ALL ALL Position: Front Left; For Non-California Models; Cutting & Welding Required During Installation
2002 - 2003 LIBERTY ALL V6 3.7 ALL ALL ALL Position: Front Right; For Federal Models; Cutting & Welding Required During Installation
2002 - 2003 LIBERTY ALL V6 3.7 ALL ALL ALL Position: Front Right; For Non-California Models; Cutting & Welding Required During Installation
2005 - 2006 WRANGLER ALL L4 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2005 - 2006 WRANGLER ALL L4 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
LINCOLN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2006 - 2006 NAVIGATOR ALL V8 5.4 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2006 - 2006 NAVIGATOR ALL V8 5.4 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2006 - 2006 NAVIGATOR ALL V8 5.4 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2006 - 2006 NAVIGATOR ALL V8 5.4 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
MAZDA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2001 - 2009 B2300 ALL L4 2.3 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
2001 - 2009 B2300 ALL L4 2.3 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1999 - 2004 MIATA ALL L4 1.8 N ALL ALL Position: Front; For Federal Models; California Emission Equipped
1999 - 2004 MIATA ALL L4 1.8 N ALL ALL Position: Front; For Non-California Models; California Emission Equipped
2001 - 2005 MIATA ALL L4 1.8 ALL ALL ALL Position: Front; For Federal Models; California Emission Equipped
2001 - 2005 MIATA ALL L4 1.8 ALL ALL ALL Position: Front; For Non-California Models; California Emission Equipped
NISSAN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1999 - 2000 FRONTIER ALL V6 3.3 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
1999 - 2000 FRONTIER ALL V6 3.3 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
1999 - 2000 FRONTIER ALL V6 3.3 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
1999 - 2000 FRONTIER ALL V6 3.3 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2001 - 2003 FRONTIER ALL V6 3.3 ALL ALL ALL Position: Rear Left; For Federal Models; Cutting & Welding Required During Installation
2001 - 2003 FRONTIER ALL V6 3.3 ALL ALL ALL Position: Rear Left; For Non-California Models; Cutting & Welding Required During Installation
2002 - 2003 FRONTIER ALL V6 3.3 ALL ALL ALL Position: Rear Right; For Federal Models; Cutting & Welding Required During Installation
2002 - 2003 FRONTIER ALL V6 3.3 ALL ALL ALL Position: Rear Right; For Non-California Models; Cutting & Welding Required During Installation
2004 - 2004 FRONTIER ALL V6 3.3 ALL ALL ALL Position: Left; For Federal Models; Underbody
2004 - 2004 FRONTIER ALL V6 3.3 ALL ALL ALL Position: Left; For Non-California Models; Underbody
2004 - 2004 FRONTIER ALL V6 3.3 ALL ALL ALL Position: Right; For Federal Models; Underbody
2004 - 2004 FRONTIER ALL V6 3.3 ALL ALL ALL Position: Right; For Non-California Models; Underbody
1998 - 2001 SENTRA ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1998 - 2001 SENTRA ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2001 - 2001 XTERRA ALL V6 3.3 N ALL ALL Position: Front Right; For Federal Models; Cutting & Welding Required During Installation
2001 - 2001 XTERRA ALL V6 3.3 N ALL ALL Position: Front Right; For Non-California Models; Cutting & Welding Required During Installation
2004 - 2004 XTERRA ALL V6 3.3 N ALL ALL Position: Rear Right; For Federal Models; Underbody
2004 - 2004 XTERRA ALL V6 3.3 N ALL ALL Position: Rear Right; For Non-California Models; Underbody
PLYMOUTH
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2000 - 2001 NEON ALL L4 2.0 ALL ALL ALL For Federal Models; Federal Emission TLEV Level with 2in Outlet
2000 - 2001 NEON ALL L4 2.0 ALL ALL ALL For Non-California Models; Federal Emission TLEV Level with 2in Outlet
TOYOTA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2005 - 2006 TUNDRA ALL V8 4.7 ALL ALL ALL Position: Front Left; For Federal Models; Cutting & Welding Required During Installation
2005 - 2006 TUNDRA ALL V8 4.7 ALL ALL ALL Position: Front Left; For Non-California Models; Cutting & Welding Required During Installation
2005 - 2006 TUNDRA ALL V8 4.7 ALL ALL ALL Position: Front Right; For Federal Models; Cutting & Welding Required During Installation
2005 - 2006 TUNDRA ALL V8 4.7 ALL ALL ALL Position: Front Right; For Non-California Models; Cutting & Welding Required During Installation
VOLKSWAGEN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1999 - 2004 BEETLE ALL L4 1.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1999 - 2004 BEETLE ALL L4 1.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2002 - 2005 BEETLE ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2002 - 2005 BEETLE ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2006 - 2010 BEETLE ALL L5 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2006 - 2010 BEETLE ALL L5 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1995 - 2002 CABRIO ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1995 - 2002 CABRIO ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1999 - 1999 GOLF ALL L4 2.0 ALL AEG ALL For Federal Models; Cutting & Welding Required During Installation
1999 - 1999 GOLF ALL L4 2.0 ALL AEG ALL For Non-California Models; Cutting & Welding Required During Installation
2000 - 2006 GOLF ALL L4 1.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2000 - 2006 GOLF ALL L4 1.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2000 - 2005 GOLF ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2000 - 2005 GOLF ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2010 - 2011 GOLF ALL L5 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2010 - 2011 GOLF ALL L5 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1999 - 2000 JETTA ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1999 - 2000 JETTA ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2000 - 2005 JETTA ALL L4 1.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2000 - 2005 JETTA ALL L4 1.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2001 - 2001 JETTA ALL L4 2.0 ALL AEG ALL For Federal Models; Cutting & Welding Required During Installation
2001 - 2001 JETTA ALL L4 2.0 ALL AEG ALL For Non-California Models; Cutting & Welding Required During Installation
2004 - 2005 JETTA ALL L4 2.0 ALL BBW ALL For Federal Models; Cutting & Welding Required During Installation
2004 - 2005 JETTA ALL L4 2.0 ALL BBW ALL For Non-California Models; Cutting & Welding Required During Installation
2005 - 2010 JETTA ALL L5 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2005 - 2010 JETTA ALL L5 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2006 - 2009 RABBIT ALL L5 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2006 - 2009 RABBIT ALL L5 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation

Product Description

MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements.
MagnaFlow Universal Catalytic Converters form the basic building blocks for a comprehensive line of direct-fit applications.

The main benefit of the universal catalytic converter is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting and tube bending equipment that is readily available to most professional installers.

All Federal catalytic converters meet EPA requirements. Federal Catalytic Converters are not legal for sale, installation or use on vehicles registered in the state of California.

All California State Catalytic converters are CARB compliant. Converters in this catalog are based on Executive Orders issued by the California Air Resource Board and must be used in accordance with this information. In California, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size.

  • Stainless steel construction
  • Formulated for Gas and Diesel Applications

Product Reviews

Be the first to review this item.

Rating
Title
Review