MagnaFlow Universal Catalytic Converter; Heavy Metal Grade; Meets Federal Requirements; Excl California Models MERCEDES-BENZ C36 AMG


Images May Not be Vehicle Specific. For Display Purposes Only.

Images Of This Specific Part Number

Non-Specific Images

Place Order Here

Part #: 99206HM
Notes: Universal Catalytic Converter
Heavy Metal Grade
Meets Federal Requirements
Excl California Models
MSRP: $129.77
Your Price: $100.27
Free Shipping

Specs

Body Length 9
Body Width 4.375
California Air Resources Board Approved No
Catalytic Converter Air Tube Adapter Not Air Tube Kit Adaptable
Catalytic Converter Body Material Stainless
Catalytic Converter Format Pre-Catalytic Converter and Main Catalytic Converter
Catalytic Converter Overall Length 13
Catalytic Converter Oxygen Sensor Location N/A
Inlet Inside Diameter 2.5
Main Piping Diameter 2.5
Material Stainless
Outlet Outside Diameter 2.5
Recommended Use Converter
Substrate Material Ceramic

All Fitments

AUDI
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2006 - 2008 A3 ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2006 - 2008 A3 ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2000 - 2002 A6 QUATTRO ALL V6 2.7 ALL ALL ALL Position: Front Left; For Federal Models; Cutting & Welding Required During Installation
2000 - 2002 A6 QUATTRO ALL V6 2.7 ALL ALL ALL Position: Front Left; For Non-California Models; Cutting & Welding Required During Installation
2000 - 2002 A6 QUATTRO ALL V6 2.7 ALL ALL ALL Position: Front Right; For Federal Models; Cutting & Welding Required During Installation
2000 - 2002 A6 QUATTRO ALL V6 2.7 ALL ALL ALL Position: Front Right; For Non-California Models; Cutting & Welding Required During Installation
1997 - 2006 A8 QUATTRO ALL V8 4.2 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
1997 - 2006 A8 QUATTRO ALL V8 4.2 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
1997 - 2006 A8 QUATTRO ALL V8 4.2 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
1997 - 2006 A8 QUATTRO ALL V8 4.2 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
BMW
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2000 - 2003 M5 ALL V8 5.0 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2000 - 2003 M5 ALL V8 5.0 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2000 - 2003 M5 ALL V8 5.0 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2000 - 2003 M5 ALL V8 5.0 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2006 - 2010 M5 ALL V10 5.0 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2006 - 2010 M5 ALL V10 5.0 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2006 - 2010 M5 ALL V10 5.0 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2006 - 2010 M5 ALL V10 5.0 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2006 - 2010 M6 ALL V10 5.0 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2006 - 2010 M6 ALL V10 5.0 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2006 - 2010 M6 ALL V10 5.0 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2006 - 2010 M6 ALL V10 5.0 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
1997 - 1998 Z3 ALL L6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1997 - 1998 Z3 ALL L6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
BUICK
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2006 - 2009 LACROSSE ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2006 - 2009 LACROSSE ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2008 - 2009 LACROSSE ALL V8 5.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2008 - 2009 LACROSSE ALL V8 5.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
CHEVROLET
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2001 - 2005 BLAZER ALL V6 4.3 ALL ALL ALL Position: Front; For Federal Models; 4-Door; RWD; Cutting & Welding Required During Installation
2001 - 2005 BLAZER ALL V6 4.3 ALL ALL ALL Position: Front; For Non-California Models; 4-Door; RWD; Cutting & Welding Required During Installation
1997 - 2003 CORVETTE ALL V8 5.7 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
1997 - 2003 CORVETTE ALL V8 5.7 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2004 - 2004 CORVETTE ALL V8 5.7 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2004 - 2004 CORVETTE ALL V8 5.7 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2005 - 2005 CORVETTE ALL V8 6.0 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2005 - 2005 CORVETTE ALL V8 6.0 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2005 - 2005 CORVETTE ALL V8 6.0 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2005 - 2005 CORVETTE ALL V8 6.0 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2006 - 2007 CORVETTE BASE V8 6.0 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2006 - 2007 CORVETTE BASE V8 6.0 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2006 - 2007 CORVETTE BASE V8 6.0 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2006 - 2007 CORVETTE BASE V8 6.0 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2008 - 2008 CORVETTE ALL V8 6.2 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2008 - 2008 CORVETTE ALL V8 6.2 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2008 - 2008 CORVETTE ALL V8 6.2 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2008 - 2008 CORVETTE ALL V8 6.2 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2010 - 2011 CORVETTE BASE V8 6.2 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2010 - 2011 CORVETTE BASE V8 6.2 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2010 - 2011 CORVETTE BASE V8 6.2 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2010 - 2011 CORVETTE BASE V8 6.2 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2010 - 2011 CORVETTE GRAND SPORT V8 6.2 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2010 - 2011 CORVETTE GRAND SPORT V8 6.2 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2010 - 2011 CORVETTE GRAND SPORT V8 6.2 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2010 - 2011 CORVETTE GRAND SPORT V8 6.2 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2012 - 2012 CORVETTE BASE V8 6.2 ALL ALL ALL Position: Front Left; For Federal Models; Cutting & Welding Required During Installation
2012 - 2012 CORVETTE BASE V8 6.2 ALL ALL ALL Position: Front Left; For Non-California Models; Cutting & Welding Required During Installation
2012 - 2012 CORVETTE BASE V8 6.2 ALL ALL ALL Position: Front Right; For Federal Models; Cutting & Welding Required During Installation
2012 - 2012 CORVETTE BASE V8 6.2 ALL ALL ALL Position: Front Right; For Non-California Models; Cutting & Welding Required During Installation
2012 - 2012 CORVETTE GRAND SPORT V8 6.2 ALL ALL ALL Position: Front Left; For Federal Models; Cutting & Welding Required During Installation
2012 - 2012 CORVETTE GRAND SPORT V8 6.2 ALL ALL ALL Position: Front Left; For Non-California Models; Cutting & Welding Required During Installation
2012 - 2012 CORVETTE GRAND SPORT V8 6.2 ALL ALL ALL Position: Front Right; For Federal Models; Cutting & Welding Required During Installation
2012 - 2012 CORVETTE GRAND SPORT V8 6.2 ALL ALL ALL Position: Front Right; For Non-California Models; Cutting & Welding Required During Installation
2001 - 2003 S10 ALL V6 4.3 ALL ALL ALL Position: Front; For Federal Models; 4WD; Cutting & Welding Required During Installation
2001 - 2003 S10 ALL V6 4.3 ALL ALL ALL Position: Front; For Non-California Models; 4WD; Cutting & Welding Required During Installation
DODGE
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2002 - 2003 RAM 1500 ALL V8 5.9 ALL ALL ALL Position: Front Left; For Federal Models; Cutting & Welding Required During Installation
2002 - 2003 RAM 1500 ALL V8 5.9 ALL ALL ALL Position: Front Left; For Non-California Models; Cutting & Welding Required During Installation
1996 - 2002 VIPER ALL V10 8.0 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
1996 - 2002 VIPER ALL V10 8.0 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
1996 - 2002 VIPER ALL V10 8.0 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
1996 - 2002 VIPER ALL V10 8.0 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2003 - 2004 VIPER ALL V10 8.3 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2003 - 2004 VIPER ALL V10 8.3 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
FORD
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2002 - 2005 EXPLORER ALL V8 4.6 ALL ALL ALL Position: Front Left; For Federal Models; Cutting & Welding Required During Installation
2002 - 2005 EXPLORER ALL V8 4.6 ALL ALL ALL Position: Front Left; For Non-California Models; Cutting & Welding Required During Installation
2002 - 2005 EXPLORER ALL V8 4.6 ALL ALL ALL Position: Front Right; For Federal Models; Cutting & Welding Required During Installation
2002 - 2005 EXPLORER ALL V8 4.6 ALL ALL ALL Position: Front Right; For Non-California Models; Cutting & Welding Required During Installation
2005 - 2005 EXPLORER ALL V6 4.0 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2005 - 2005 EXPLORER ALL V6 4.0 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2005 - 2005 EXPLORER ALL V6 4.0 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2005 - 2005 EXPLORER ALL V6 4.0 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2001 - 2005 EXPLORER SPORT TRAC ALL V6 4.0 ALL ALL ALL Position: Front Left; For Federal Models; Cutting & Welding Required During Installation
2001 - 2005 EXPLORER SPORT TRAC ALL V6 4.0 ALL ALL ALL Position: Front Left; For Non-California Models; Cutting & Welding Required During Installation
2001 - 2005 EXPLORER SPORT TRAC ALL V6 4.0 ALL ALL ALL Position: Front Right; For Federal Models; Cutting & Welding Required During Installation
2001 - 2005 EXPLORER SPORT TRAC ALL V6 4.0 ALL ALL ALL Position: Front Right; For Non-California Models; Cutting & Welding Required During Installation
2000 - 2000 F-150 ALL V8 5.4 ALL ALL ALL Position: Right; For Federal Models; 4WD; 4R70W Trans; Cutting & Welding Required During Installation
2000 - 2000 F-150 ALL V8 5.4 ALL ALL ALL Position: Right; For Non-California Models; 4WD; 4R70W Trans; Cutting & Welding Required During Installation
2005 - 2006 RANGER ALL V6 3.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
2005 - 2006 RANGER ALL V6 3.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
2005 - 2006 RANGER ALL V6 4.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
2005 - 2006 RANGER ALL V6 4.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
GMC
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2000 - 2001 JIMMY ALL V6 4.3 ALL ALL ALL Position: Front; For Federal Models; 4-Door; RWD; Cutting & Welding Required During Installation
2000 - 2001 JIMMY ALL V6 4.3 ALL ALL ALL Position: Front; For Non-California Models; 4-Door; RWD; Cutting & Welding Required During Installation
1996 - 2003 SONOMA ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1996 - 2003 SONOMA ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
HYUNDAI
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2007 - 2009 ENTOURAGE ALL V6 3.8 ALL ALL ALL Position: Rear; For Federal Models; Underbody Converter
2007 - 2009 ENTOURAGE ALL V6 3.8 ALL ALL ALL Position: Rear; For Non-California Models; Underbody Converter
JEEP
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2006 - 2007 COMMANDER ALL V8 5.7 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2006 - 2007 COMMANDER ALL V8 5.7 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
1999 - 2001 GRAND CHEROKEE ALL V8 4.7 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1999 - 2001 GRAND CHEROKEE ALL V8 4.7 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
2002 - 2004 GRAND CHEROKEE ALL L6 4.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
2002 - 2004 GRAND CHEROKEE ALL L6 4.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
2004 - 2004 GRAND CHEROKEE ALL V8 4.7 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
2004 - 2004 GRAND CHEROKEE ALL V8 4.7 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
KIA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2006 - 2007 SEDONA ALL V6 3.8 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
2006 - 2007 SEDONA ALL V6 3.8 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
2008 - 2010 SEDONA ALL V6 3.8 ALL ALL ALL Position: Rear; For Federal Models; Underbody
2008 - 2010 SEDONA ALL V6 3.8 ALL ALL ALL Position: Rear; For Non-California Models; Underbody
LINCOLN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2003 - 2005 AVIATOR ALL V8 4.6 ALL ALL ALL Position: Front Left; For Federal Models; Cutting & Welding Required During Installation
2003 - 2005 AVIATOR ALL V8 4.6 ALL ALL ALL Position: Front Left; For Non-California Models; Cutting & Welding Required During Installation
2003 - 2005 AVIATOR ALL V8 4.6 ALL ALL ALL Position: Front Right; For Federal Models; Cutting & Welding Required During Installation
2003 - 2005 AVIATOR ALL V8 4.6 ALL ALL ALL Position: Front Right; For Non-California Models; Cutting & Welding Required During Installation
2006 - 2007 MARK LT ALL V8 5.4 ALL ALL ALL Position: Left; For Federal Models; RWD; Cutting & Welding Required During Installation
2006 - 2007 MARK LT ALL V8 5.4 ALL ALL ALL Position: Left; For Non-California Models; RWD; Cutting & Welding Required During Installation
2006 - 2007 MARK LT ALL V8 5.4 ALL ALL ALL Position: Right; For Federal Models; RWD; Cutting & Welding Required During Installation
2006 - 2007 MARK LT ALL V8 5.4 ALL ALL ALL Position: Right; For Non-California Models; RWD; Cutting & Welding Required During Installation
MAZDA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2004 - 2004 3 ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2004 - 2004 3 ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2004 - 2006 3 I L4 2.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
2004 - 2006 3 I L4 2.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
2005 - 2006 3 ALL L4 2.3 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
2005 - 2006 3 ALL L4 2.3 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
2004 - 2006 B3000 ALL V6 3.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
2004 - 2006 B3000 ALL V6 3.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
2004 - 2006 B4000 ALL V6 4.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
2004 - 2006 B4000 ALL V6 4.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
MERCEDES-BENZ
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2002 - 2002 C230 KOMPRESSOR L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2002 - 2002 C230 KOMPRESSOR L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1995 - 1995 C36 AMG ALL L6 3.6 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 C36 AMG ALL L6 3.6 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2006 - 2006 CLS55 AMG ALL V8 5.5 ALL ALL ALL Position: Front Left; For Federal Models; Cutting & Welding Required During Installation
2006 - 2006 CLS55 AMG ALL V8 5.5 ALL ALL ALL Position: Front Left; For Non-California Models; Cutting & Welding Required During Installation
2006 - 2006 CLS55 AMG ALL V8 5.5 ALL ALL ALL Position: Front Right; For Federal Models; Cutting & Welding Required During Installation
2006 - 2006 CLS55 AMG ALL V8 5.5 ALL ALL ALL Position: Front Right; For Non-California Models; Cutting & Welding Required During Installation
2006 - 2006 CLS55 AMG ALL V8 5.5 ALL ALL ALL Position: Rear Left; For Federal Models; Cutting & Welding Required During Installation
2006 - 2006 CLS55 AMG ALL V8 5.5 ALL ALL ALL Position: Rear Left; For Non-California Models; Cutting & Welding Required During Installation
2006 - 2006 CLS55 AMG ALL V8 5.5 ALL ALL ALL Position: Rear Right; For Federal Models; Cutting & Welding Required During Installation
2006 - 2006 CLS55 AMG ALL V8 5.5 ALL ALL ALL Position: Rear Right; For Non-California Models; Cutting & Welding Required During Installation
2003 - 2006 E55 AMG ALL V8 5.5 ALL ALL ALL Position: Front Left; For Federal Models; Cutting & Welding Required During Installation
2003 - 2006 E55 AMG ALL V8 5.5 ALL ALL ALL Position: Front Left; For Non-California Models; Cutting & Welding Required During Installation
2003 - 2006 E55 AMG ALL V8 5.5 ALL ALL ALL Position: Front Right; For Federal Models; Cutting & Welding Required During Installation
2003 - 2006 E55 AMG ALL V8 5.5 ALL ALL ALL Position: Front Right; For Non-California Models; Cutting & Welding Required During Installation
2003 - 2006 E55 AMG ALL V8 5.5 ALL ALL ALL Position: Rear Left; For Federal Models; Cutting & Welding Required During Installation
2003 - 2006 E55 AMG ALL V8 5.5 ALL ALL ALL Position: Rear Left; For Non-California Models; Cutting & Welding Required During Installation
2003 - 2006 E55 AMG ALL V8 5.5 ALL ALL ALL Position: Rear Right; For Federal Models; Cutting & Welding Required During Installation
2003 - 2006 E55 AMG ALL V8 5.5 ALL ALL ALL Position: Rear Right; For Non-California Models; Cutting & Welding Required During Installation
1998 - 1999 S320 ALL L6 3.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1998 - 1999 S320 ALL L6 3.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1996 - 1997 SL320 ALL L6 3.2 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
1996 - 1997 SL320 ALL L6 3.2 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
1996 - 1997 SL320 ALL L6 3.2 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
1996 - 1997 SL320 ALL L6 3.2 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2001 - 2004 SLK230 ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2001 - 2004 SLK230 ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
MERCURY
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2002 - 2005 MOUNTAINEER ALL V8 4.6 ALL ALL ALL Position: Front Left; For Federal Models; Cutting & Welding Required During Installation
2002 - 2005 MOUNTAINEER ALL V8 4.6 ALL ALL ALL Position: Front Left; For Non-California Models; Cutting & Welding Required During Installation
2002 - 2005 MOUNTAINEER ALL V8 4.6 ALL ALL ALL Position: Front Right; For Federal Models; Cutting & Welding Required During Installation
2002 - 2005 MOUNTAINEER ALL V8 4.6 ALL ALL ALL Position: Front Right; For Non-California Models; Cutting & Welding Required During Installation
2002 - 2004 MOUNTAINEER ALL V6 4.0 ALL ALL ALL Position: Front Left; For Federal Models; Cutting & Welding Required During Installation
2002 - 2004 MOUNTAINEER ALL V6 4.0 ALL ALL ALL Position: Front Left; For Non-California Models; Cutting & Welding Required During Installation
2002 - 2004 MOUNTAINEER ALL V6 4.0 ALL ALL ALL Position: Front Right; For Federal Models; Cutting & Welding Required During Installation
2002 - 2004 MOUNTAINEER ALL V6 4.0 ALL ALL ALL Position: Front Right; For Non-California Models; Cutting & Welding Required During Installation
2005 - 2005 MOUNTAINEER ALL V6 4.0 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2005 - 2005 MOUNTAINEER ALL V6 4.0 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2005 - 2005 MOUNTAINEER ALL V6 4.0 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2005 - 2005 MOUNTAINEER ALL V6 4.0 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
MITSUBISHI
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2003 - 2006 OUTLANDER ALL L4 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2003 - 2006 OUTLANDER ALL L4 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
NISSAN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1996 - 1996 300ZX ALL V6 3.0 T ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
1996 - 1996 300ZX ALL V6 3.0 T ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
1996 - 1996 300ZX ALL V6 3.0 T ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
1996 - 1996 300ZX ALL V6 3.0 T ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2006 - 2006 ALTIMA ALL V6 3.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2006 - 2006 ALTIMA ALL V6 3.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2004 - 2005 MAXIMA ALL V6 3.5 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
2004 - 2005 MAXIMA ALL V6 3.5 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
2003 - 2007 MURANO ALL V6 3.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2003 - 2007 MURANO ALL V6 3.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2004 - 2009 QUEST ALL V6 3.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2004 - 2009 QUEST ALL V6 3.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
OLDSMOBILE
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2001 - 2001 SILHOUETTE ALL V6 3.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2001 - 2001 SILHOUETTE ALL V6 3.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
PONTIAC
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2005 - 2008 GRAND PRIX GXP V8 5.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2005 - 2008 GRAND PRIX GXP V8 5.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2005 - 2006 GTO ALL V8 6.0 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
2005 - 2006 GTO ALL V8 6.0 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
2005 - 2006 GTO ALL V8 6.0 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
2005 - 2006 GTO ALL V8 6.0 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
2006 - 2009 SOLSTICE BASE L4 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2006 - 2009 SOLSTICE BASE L4 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
SAAB
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2003 - 2003 9-3 ALL L4 2.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
2003 - 2003 9-3 ALL L4 2.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
2004 - 2008 9-3 ALL L4 2.0 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
2004 - 2008 9-3 ALL L4 2.0 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
SATURN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2005 - 2006 RELAY 2 V6 3.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2005 - 2006 RELAY 2 V6 3.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2007 - 2008 SKY BASE L4 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2007 - 2008 SKY BASE L4 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2002 - 2006 VUE ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2002 - 2006 VUE ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
SUBARU
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2007 - 2008 FORESTER ALL H4 2.5 N ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
2007 - 2008 FORESTER ALL H4 2.5 N ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
2002 - 2005 IMPREZA WRX H4 2.0 T ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
2002 - 2005 IMPREZA WRX H4 2.0 T ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
2007 - 2007 IMPREZA ALL H4 2.5 N ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
2007 - 2007 IMPREZA ALL H4 2.5 N ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
2007 - 2007 IMPREZA WRX H4 2.5 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
2007 - 2007 IMPREZA WRX H4 2.5 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
2007 - 2007 IMPREZA WRX LIMITED H4 2.5 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
2007 - 2007 IMPREZA WRX LIMITED H4 2.5 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
2007 - 2007 IMPREZA WRX STI H4 2.5 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
2007 - 2007 IMPREZA WRX STI H4 2.5 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
2007 - 2007 IMPREZA WRX STI LIMITED H4 2.5 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
2007 - 2007 IMPREZA WRX STI LIMITED H4 2.5 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
2007 - 2007 IMPREZA WRX TR H4 2.5 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
2007 - 2007 IMPREZA WRX TR H4 2.5 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
TOYOTA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2000 - 2005 MR2 SPYDER ALL L4 1.8 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
2000 - 2005 MR2 SPYDER ALL L4 1.8 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
2006 - 2010 RAV4 ALL V6 3.5 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
2006 - 2010 RAV4 ALL V6 3.5 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
2004 - 2006 SIENNA ALL V6 3.3 ALL ALL ALL Position: Rear; For Federal Models; AWD; Cutting & Welding Required During Installation
2004 - 2006 SIENNA ALL V6 3.3 ALL ALL ALL Position: Rear; For Federal Models; FWD; Cutting & Welding Required During Installation
2004 - 2006 SIENNA ALL V6 3.3 ALL ALL ALL Position: Rear; For Non-California Models; AWD; Cutting & Welding Required During Installation
2004 - 2006 SIENNA ALL V6 3.3 ALL ALL ALL Position: Rear; For Non-California Models; FWD; Cutting & Welding Required During Installation
2005 - 2009 TACOMA ALL L4 2.7 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2005 - 2009 TACOMA ALL L4 2.7 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2000 - 2004 TUNDRA ALL V6 3.4 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
2000 - 2004 TUNDRA ALL V6 3.4 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
VOLKSWAGEN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2006 - 2008 PASSAT ALL L4 2.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
2006 - 2008 PASSAT ALL L4 2.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
2004 - 2004 TOUAREG ALL V6 3.2 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
2004 - 2004 TOUAREG ALL V6 3.2 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
VOLVO
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2000 - 2004 C70 ALL L5 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2000 - 2004 C70 ALL L5 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2000 - 2002 C70 ALL L5 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2000 - 2002 C70 ALL L5 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2005 - 2007 S40 ALL L5 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2005 - 2007 S40 ALL L5 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2001 - 2003 S60 ALL L5 2.4 N ALL ALL For Federal Models; Cutting & Welding Required During Installation
2001 - 2003 S60 ALL L5 2.4 N ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2003 - 2004 S60 ALL L5 2.5 ALL ALL ALL For Federal Models; AWD; Cutting & Welding Required During Installation
2003 - 2004 S60 ALL L5 2.5 ALL ALL ALL For Non-California Models; AWD; Cutting & Welding Required During Installation
2004 - 2004 S60 ALL L5 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
2004 - 2004 S60 ALL L5 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2005 - 2009 V50 ALL L5 2.4 ALL ALL ALL For Federal Models; With One Converter; Excl. ULEV SPEC
2005 - 2009 V50 ALL L5 2.4 ALL ALL ALL For Non-California Models; With One Converter; Excl. ULEV SPEC
1999 - 1999 V70 ALL L5 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1999 - 1999 V70 ALL L5 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2001 - 2004 V70 ALL L5 2.4 N ALL ALL For Federal Models; Cutting & Welding Required During Installation
2001 - 2004 V70 ALL L5 2.4 N ALL ALL For Non-California Models; Cutting & Welding Required During Installation
2005 - 2011 XC90 ALL V8 4.4 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
2005 - 2011 XC90 ALL V8 4.4 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation

Product Description

MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements.
MagnaFlow Universal Catalytic Converters form the basic building blocks for a comprehensive line of direct-fit applications.

The main benefit of the universal catalytic converter is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting and tube bending equipment that is readily available to most professional installers.

All Federal catalytic converters meet EPA requirements. Federal Catalytic Converters are not legal for sale, installation or use on vehicles registered in the state of California.

All California State Catalytic converters are CARB compliant. Converters in this catalog are based on Executive Orders issued by the California Air Resource Board and must be used in accordance with this information. In California, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size.

  • Stainless steel construction
  • Formulated for Gas and Diesel Applications

Product Reviews

Be the first to review this item.

Rating
Title
Review