MagnaFlow Universal Catalytic Converter; Standard Grade; Meets Federal Requirements; Excl California Models JAGUAR XJ6


Images May Not be Vehicle Specific. For Display Purposes Only.

Images Of This Specific Part Number

Non-Specific Images

Place Order Here

Part #: 94007
Notes: Universal Catalytic Converter
Standard Grade
Meets Federal Requirements
Excl California Models
MSRP: $128.76
Your Price: $99.49

Specs

Body Length 12
Body Width 6.375
California Air Resources Board Approved No
Catalytic Converter Air Tube Adapter Not Air Tube Kit Adaptable
Catalytic Converter Body Material Stainless
Catalytic Converter Format Pre-Catalytic Converter and Main Catalytic Converter
Catalytic Converter Overall Length 16
Catalytic Converter Oxygen Sensor Location N/A
Inlet Inside Diameter 2.5
Main Piping Diameter 2.5
Material Stainless
Outlet Outside Diameter 2
Recommended Use Converter
Substrate Material Ceramic

All Fitments

ALFA ROMEO
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1991 - 1995 164 ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1995 164 ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1993 164 L V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1993 164 L V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1981 - 1986 GTV-6 ALL V6 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1981 - 1986 GTV-6 ALL V6 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1989 MILANO ALL V6 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1989 MILANO ALL V6 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1989 MILANO ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1989 MILANO ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
BMW
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1987 - 1991 325I ALL L6 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1991 325I ALL L6 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1991 325IS ALL L6 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1991 325IS ALL L6 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1991 325IX ALL L6 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1991 325IX ALL L6 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1993 525IT ALL L6 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1993 525IT ALL L6 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1982 - 1987 528E ALL L6 2.7 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1982 - 1987 528E ALL L6 2.7 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1983 - 1984 533I ALL L6 3.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1983 - 1984 533I ALL L6 3.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1988 535I ALL L6 3.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1988 535I ALL L6 3.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1978 - 1984 633CSI ALL L6 3.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1978 - 1984 633CSI ALL L6 3.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1987 635CSI ALL L6 3.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1987 635CSI ALL L6 3.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1980 - 1984 733I ALL L6 3.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1980 - 1984 733I ALL L6 3.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1988 735I ALL L6 3.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1988 735I ALL L6 3.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1988 735IL ALL L6 3.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1988 735IL ALL L6 3.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1994 750IL ALL V12 5.0 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
1988 - 1994 750IL ALL V12 5.0 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
1988 - 1994 750IL ALL V12 5.0 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
1988 - 1994 750IL ALL V12 5.0 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
1988 - 1988 M5 ALL L6 3.5 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
1988 - 1988 M5 ALL L6 3.5 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
1988 - 1988 M5 ALL L6 3.5 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
1988 - 1988 M5 ALL L6 3.5 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
1991 - 1993 M5 ALL L6 3.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1993 M5 ALL L6 3.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1988 M6 ALL L6 3.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1988 M6 ALL L6 3.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
CHRYSLER
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1993 - 1995 CONCORDE ALL V6 3.3 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 CONCORDE ALL V6 3.3 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 CONCORDE ALL V6 3.5 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 CONCORDE ALL V6 3.5 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 LHS ALL V6 3.5 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 LHS ALL V6 3.5 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 NEW YORKER ALL V6 3.5 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 NEW YORKER ALL V6 3.5 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
DODGE
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1993 - 1995 INTREPID ALL V6 3.3 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 INTREPID ALL V6 3.3 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 INTREPID ALL V6 3.5 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 INTREPID ALL V6 3.5 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
EAGLE
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1993 - 1995 VISION ALL V6 3.3 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 VISION ALL V6 3.3 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 VISION ALL V6 3.5 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 VISION ALL V6 3.5 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
FORD
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1984 - 1995 BRONCO ALL V8 5.0 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1984 - 1995 BRONCO ALL V8 5.0 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1984 - 1995 BRONCO ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1984 - 1995 BRONCO ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1987 - 1992 BRONCO ALL L6 4.9 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1987 - 1992 BRONCO ALL L6 4.9 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1986 - 1987 BRONCO II ALL V6 2.9 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1986 - 1987 BRONCO II ALL V6 2.9 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1984 - 1995 E-150 ECONOLINE ALL L6 4.9 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1984 - 1995 E-150 ECONOLINE ALL L6 4.9 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1984 - 1985 E-150 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ G Engine VIN; 2BBL; Cutting & Welding Required During Installation
1984 - 1985 E-150 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ H Engine VIN; 4BBL; Cutting & Welding Required During Installation
1984 - 1985 E-150 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ G Engine VIN; 2BBL; Cutting & Welding Required During Installation
1984 - 1985 E-150 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ H Engine VIN; 4BBL; Cutting & Welding Required During Installation
1986 - 1995 E-150 ECONOLINE ALL V8 5.0 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1986 - 1995 E-150 ECONOLINE ALL V8 5.0 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1986 - 1995 E-150 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1986 - 1995 E-150 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1984 - 1985 E-150 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ G Engine VIN; 2BBL; Cutting & Welding Required During Installation
1984 - 1985 E-150 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ H Engine VIN; 4BBL; Cutting & Welding Required During Installation
1984 - 1985 E-150 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ G Engine VIN; 2BBL; Cutting & Welding Required During Installation
1984 - 1985 E-150 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ H Engine VIN; 4BBL; Cutting & Welding Required During Installation
1984 - 1995 E-150 ECONOLINE CLUB WAGON ALL L6 4.9 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1984 - 1995 E-150 ECONOLINE CLUB WAGON ALL L6 4.9 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1986 - 1995 E-150 ECONOLINE CLUB WAGON ALL V8 5.0 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1986 - 1995 E-150 ECONOLINE CLUB WAGON ALL V8 5.0 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1986 - 1995 E-150 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1986 - 1995 E-150 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1984 - 1995 E-250 ECONOLINE ALL L6 4.9 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1984 - 1995 E-250 ECONOLINE ALL L6 4.9 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1984 - 1985 E-250 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ G Engine VIN; 2BBL; Cutting & Welding Required During Installation
1984 - 1985 E-250 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ H Engine VIN; 4BBL; Cutting & Welding Required During Installation
1984 - 1985 E-250 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ G Engine VIN; 2BBL; Cutting & Welding Required During Installation
1984 - 1985 E-250 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ H Engine VIN; 4BBL; Cutting & Welding Required During Installation
1986 - 1991 E-250 ECONOLINE ALL V8 5.0 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1986 - 1991 E-250 ECONOLINE ALL V8 5.0 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1986 - 1987 E-250 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1986 - 1987 E-250 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1988 - 1995 E-250 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; To 8500 GVW
1988 - 1995 E-250 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; To 8500 GVW
1984 - 1985 E-250 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ G Engine VIN; 2BBL; Cutting & Welding Required During Installation
1984 - 1985 E-250 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ G Engine VIN; 2BBL; Cutting & Welding Required During Installation
1984 - 1991 E-250 ECONOLINE CLUB WAGON ALL L6 4.9 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1984 - 1991 E-250 ECONOLINE CLUB WAGON ALL L6 4.9 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1985 - 1985 E-250 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ H Engine VIN; 4BBL; Cutting & Welding Required During Installation
1985 - 1985 E-250 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ H Engine VIN; 4BBL; Cutting & Welding Required During Installation
1986 - 1987 E-250 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1986 - 1987 E-250 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1988 - 1991 E-250 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; To 8500 GVW
1988 - 1991 E-250 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; To 8500 GVW
1984 - 1995 E-350 ECONOLINE ALL L6 4.9 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1984 - 1995 E-350 ECONOLINE ALL L6 4.9 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1984 - 1985 E-350 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ G Engine VIN; 2BBL; Cutting & Welding Required During Installation
1984 - 1985 E-350 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ G Engine VIN; 2BBL; Cutting & Welding Required During Installation
1985 - 1985 E-350 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ H Engine VIN; 4BBL; Cutting & Welding Required During Installation
1985 - 1985 E-350 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ H Engine VIN; 4BBL; Cutting & Welding Required During Installation
1986 - 1987 E-350 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1986 - 1987 E-350 ECONOLINE ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1984 - 1995 E-350 ECONOLINE CLUB WAGON ALL L6 4.9 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1984 - 1995 E-350 ECONOLINE CLUB WAGON ALL L6 4.9 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1984 - 1985 E-350 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ G Engine VIN; 2BBL; Cutting & Welding Required During Installation
1984 - 1985 E-350 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ G Engine VIN; 2BBL; Cutting & Welding Required During Installation
1985 - 1985 E-350 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ H Engine VIN; 4BBL; Cutting & Welding Required During Installation
1985 - 1985 E-350 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ H Engine VIN; 4BBL; Cutting & Welding Required During Installation
1986 - 1987 E-350 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1986 - 1987 E-350 ECONOLINE CLUB WAGON ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1984 - 1987 F-150 ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ H Engine VIN; 4BBL; Cutting & Welding Required During Installation
1984 - 1987 F-150 ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ H Engine VIN; 4BBL; Cutting & Welding Required During Installation
1984 - 1985 F-150 ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ G Engine VIN; 2BBL; Cutting & Welding Required During Installation
1984 - 1985 F-150 ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ G Engine VIN; 2BBL; Cutting & Welding Required During Installation
1987 - 1995 F-150 ALL L6 4.9 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1987 - 1995 F-150 ALL L6 4.9 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1987 - 1995 F-150 ALL V8 5.0 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1987 - 1995 F-150 ALL V8 5.0 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1988 - 1993 F-150 ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1988 - 1993 F-150 ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 F-150 ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ H Engine VIN; Cutting & Welding Required During Installation
1994 - 1995 F-150 ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ H Engine VIN; Cutting & Welding Required During Installation
1984 - 1985 F-250 ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ G Engine VIN; 2BBL; Cutting & Welding Required During Installation
1984 - 1985 F-250 ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ G Engine VIN; 2BBL; Cutting & Welding Required During Installation
1984 - 1986 F-250 ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ H Engine VIN; 4BBL; Cutting & Welding Required During Installation
1984 - 1986 F-250 ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ H Engine VIN; 4BBL; Cutting & Welding Required During Installation
1987 - 1995 F-250 ALL L6 4.9 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1987 - 1995 F-250 ALL L6 4.9 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1987 - 1995 F-250 ALL V8 5.0 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1987 - 1995 F-250 ALL V8 5.0 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1987 - 1995 F-250 ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; To 8500 GVW
1987 - 1995 F-250 ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; To 8500 GVW
1984 - 1987 F-350 ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ H Engine VIN; 4BBL; Cutting & Welding Required During Installation
1984 - 1987 F-350 ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ H Engine VIN; 4BBL; Cutting & Welding Required During Installation
1984 - 1985 F-350 ALL V8 5.8 ALL ALL ALL Position: Front; For Federal Models; w/ G Engine VIN; 2BBL; Cutting & Welding Required During Installation
1984 - 1985 F-350 ALL V8 5.8 ALL ALL ALL Position: Front; For Non-California Models; w/ G Engine VIN; 2BBL; Cutting & Welding Required During Installation
1987 - 1995 F-350 ALL L6 4.9 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1987 - 1995 F-350 ALL L6 4.9 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1986 - 1987 RANGER ALL V6 2.9 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1986 - 1987 RANGER ALL V6 2.9 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1991 - 1993 THUNDERBIRD ALL V8 5.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1991 - 1993 THUNDERBIRD ALL V8 5.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
JAGUAR
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1982 - 1987 VANDEN PLAS ALL L6 4.2 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1982 - 1987 VANDEN PLAS ALL L6 4.2 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1988 - 1989 VANDEN PLAS ALL L6 3.6 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1988 - 1989 VANDEN PLAS ALL L6 3.6 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1995 - 1995 VANDEN PLAS ALL L6 4.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 VANDEN PLAS ALL L6 4.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1975 - 1979 XJ6 ALL L6 4.2 ALL ALL ALL Position: Rear Left; For Federal Models; Cutting & Welding Required During Installation
1975 - 1979 XJ6 ALL L6 4.2 ALL ALL ALL Position: Rear Left; For Non-California Models; Cutting & Welding Required During Installation
1975 - 1979 XJ6 ALL L6 4.2 ALL ALL ALL Position: Rear Right; For Federal Models; Cutting & Welding Required During Installation
1975 - 1979 XJ6 ALL L6 4.2 ALL ALL ALL Position: Rear Right; For Non-California Models; Cutting & Welding Required During Installation
1980 - 1987 XJ6 ALL L6 4.2 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1980 - 1987 XJ6 ALL L6 4.2 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1988 - 1989 XJ6 ALL L6 3.6 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1988 - 1989 XJ6 ALL L6 3.6 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
MERCEDES-BENZ
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1986 - 1987 190E ALL L4 2.3 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1986 - 1987 190E ALL L4 2.3 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1987 - 1993 190E ALL L6 2.6 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1987 - 1993 190E ALL L6 2.6 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1978 - 1978 230 ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1978 - 1978 230 ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1989 260E ALL L6 2.6 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1987 - 1989 260E ALL L6 2.6 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1978 - 1979 280CE ALL L6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1978 - 1979 280CE ALL L6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1980 - 1980 280CE ALL L6 2.8 ALL ALL ALL For Federal Models; To Chassis Number 016970
1980 - 1980 280CE ALL L6 2.8 ALL ALL ALL For Non-California Models; To Chassis Number 016970
1977 - 1979 280E ALL L6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1977 - 1979 280E ALL L6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1980 - 1980 280E ALL L6 2.8 ALL ALL ALL For Federal Models; To Chassis Number 063890
1980 - 1980 280E ALL L6 2.8 ALL ALL ALL For Non-California Models; To Chassis Number 063890
1977 - 1979 280SE ALL L6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1977 - 1979 280SE ALL L6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1980 - 1980 280SE ALL L6 2.8 ALL ALL ALL For Federal Models; To Chassis Number 150379
1980 - 1980 280SE ALL L6 2.8 ALL ALL ALL For Non-California Models; To Chassis Number 150379
1988 - 1992 300CE ALL L6 3.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1988 - 1992 300CE ALL L6 3.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1986 - 1993 300E ALL L6 3.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1986 - 1993 300E ALL L6 3.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1990 - 1992 300E ALL L6 2.6 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1990 - 1992 300E ALL L6 2.6 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1988 - 1991 300SE ALL L6 3.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1988 - 1991 300SE ALL L6 3.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1988 - 1991 300SEL ALL L6 3.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1988 - 1991 300SEL ALL L6 3.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1990 - 1993 300SL ALL L6 3.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1990 - 1993 300SL ALL L6 3.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1988 - 1993 300TE ALL L6 3.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1988 - 1993 300TE ALL L6 3.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1992 - 1993 400E ALL V8 4.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1993 400E ALL V8 4.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1992 400SE ALL V8 4.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1992 400SE ALL V8 4.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1993 400SEL ALL V8 4.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1993 400SEL ALL V8 4.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1991 420SEL ALL V8 4.2 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1986 - 1991 420SEL ALL V8 4.2 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1993 - 1993 500SEC ALL V8 5.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1993 500SEC ALL V8 5.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1993 500SEL BASE V8 5.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1993 500SEL BASE V8 5.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1993 500SL ALL V8 5.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1993 500SL ALL V8 5.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1991 560SEC ALL V8 5.6 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1986 - 1991 560SEC ALL V8 5.6 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1986 - 1991 560SEL ALL V8 5.6 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1986 - 1991 560SEL ALL V8 5.6 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1986 - 1989 560SL ALL V8 5.6 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1986 - 1989 560SL ALL V8 5.6 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
MERCURY
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1991 - 1993 COUGAR ALL V8 5.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1991 - 1993 COUGAR ALL V8 5.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
SUBARU
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1992 - 1995 SVX ALL H6 3.3 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1992 - 1995 SVX ALL H6 3.3 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
TOYOTA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1993 - 1995 SUPRA ALL L6 3.0 N ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 SUPRA ALL L6 3.0 N ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation

Product Description

MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements.
MagnaFlow Universal Catalytic Converters form the basic building blocks for a comprehensive line of direct-fit applications.

The main benefit of the universal catalytic converter is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting and tube bending equipment that is readily available to most professional installers.

All Federal catalytic converters meet EPA requirements. Federal Catalytic Converters are not legal for sale, installation or use on vehicles registered in the state of California.

All California State Catalytic converters are CARB compliant. Converters in this catalog are based on Executive Orders issued by the California Air Resource Board and must be used in accordance with this information. In California, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size.

  • Stainless steel construction
  • Formulated for Gas and Diesel Applications

Product Reviews

Be the first to review this item.

Rating
Title
Review