MagnaFlow Universal Catalytic Converter; Standard Grade; Meets Federal Requirements; Excl California Models FORD E-100 ECONOLINE


Images May Not be Vehicle Specific. For Display Purposes Only.

Images Of This Specific Part Number

Non-Specific Images

Place Order Here

Part #: 91005
Notes: Universal Catalytic Converter
Standard Grade
Meets Federal Requirements
Excl California Models
MSRP: $93.27
Your Price: $72.07

Specs

Body Length 9
Body Width 5.5
California Air Resources Board Approved No
Catalytic Converter Air Tube Adapter Not Air Tube Kit Adaptable
Catalytic Converter Body Material Stainless
Catalytic Converter Format Pre-Catalytic Converter and Main Catalytic Converter
Catalytic Converter Overall Length 13
Catalytic Converter Oxygen Sensor Location N/A
Inlet Inside Diameter 2.25
Main Piping Diameter 2.25
Material Stainless
Outlet Outside Diameter 2.25
Recommended Use Converter
Substrate Material Ceramic

All Fitments

AUDI
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1992 - 1994 V8 QUATTRO ALL V8 4.2 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
1992 - 1994 V8 QUATTRO ALL V8 4.2 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
1992 - 1994 V8 QUATTRO ALL V8 4.2 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
1992 - 1994 V8 QUATTRO ALL V8 4.2 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
BUICK
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1989 - 1993 CENTURY ALL V6 3.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1993 CENTURY ALL V6 3.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1990 ELECTRA ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1990 ELECTRA ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1991 LESABRE ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1991 LESABRE ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1986 LESABRE ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1986 LESABRE ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1990 REATTA ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1990 REATTA ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 REGAL ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 REGAL ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1990 RIVIERA ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1990 RIVIERA ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1987 SKYHAWK ALL L4 2.0 T ALL ALL For Federal Models; w/ M Engine VIN; Cutting & Welding Required During Installation
1987 - 1987 SKYHAWK ALL L4 2.0 T ALL ALL For Non-California Models; w/ M Engine VIN; Cutting & Welding Required During Installation
1988 - 1991 SKYLARK ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1991 SKYLARK ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1993 SKYLARK ALL V6 3.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1993 SKYLARK ALL V6 3.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
CHEVROLET
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1985 - 1989 CAMARO ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1989 CAMARO ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1989 CAVALIER Z24 V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1989 CAVALIER Z24 V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1990 CAVALIER Z24 V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1990 CAVALIER Z24 V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1993 LLV ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1993 LLV ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 LLV ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 LLV ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1991 LUMINA APV ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1991 LUMINA APV ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 LUMINA APV ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 LUMINA APV ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1982 - 1985 S10 ALL L4 1.9 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1982 - 1985 S10 ALL L4 1.9 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1982 - 1987 S10 ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1982 - 1987 S10 ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1983 - 1984 S10 ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1983 - 1984 S10 ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1993 S10 ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1993 S10 ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1983 - 1984 S10 BLAZER ALL L4 1.9 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1983 - 1984 S10 BLAZER ALL L4 1.9 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1983 - 1984 S10 BLAZER ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1983 - 1984 S10 BLAZER ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1983 - 1987 S10 BLAZER ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1983 - 1987 S10 BLAZER ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1988 S10 BLAZER ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1988 S10 BLAZER ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
CHRYSLER
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1995 - 1995 CIRRUS ALL L4 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 CIRRUS ALL L4 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1995 - 1995 CIRRUS ALL V6 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 CIRRUS ALL V6 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1979 - 1979 CORDOBA ALL V8 5.9 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1979 - 1979 CORDOBA ALL V8 5.9 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1984 - 1984 E CLASS ALL L4 2.2 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1984 - 1984 E CLASS ALL L4 2.2 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1993 IMPERIAL ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1993 IMPERIAL ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1984 - 1986 LASER ALL L4 2.2 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1984 - 1986 LASER ALL L4 2.2 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1984 - 1984 LEBARON ALL L4 2.2 T ALL ALL For Federal Models; w/ E Engine VIN; Cutting & Welding Required During Installation
1984 - 1984 LEBARON ALL L4 2.2 T ALL ALL For Non-California Models; w/ E Engine VIN; Cutting & Welding Required During Installation
1985 - 1985 LEBARON ALL L4 2.2 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1985 LEBARON ALL L4 2.2 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1995 LEBARON ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1995 LEBARON ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1979 - 1979 NEW YORKER ALL V8 5.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1979 - 1979 NEW YORKER ALL V8 5.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1979 - 1980 NEW YORKER ALL V8 5.9 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1979 - 1980 NEW YORKER ALL V8 5.9 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1984 - 1984 NEW YORKER ALL L4 2.2 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1984 - 1984 NEW YORKER ALL L4 2.2 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1988 NEW YORKER ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1988 NEW YORKER ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1993 NEW YORKER ALL V6 3.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1993 NEW YORKER ALL V6 3.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1993 NEW YORKER ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1993 NEW YORKER ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1979 - 1980 NEWPORT ALL V8 5.9 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1979 - 1980 NEWPORT ALL V8 5.9 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1979 - 1979 NEWPORT ALL V8 5.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1979 - 1979 NEWPORT ALL V8 5.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1990 TOWN & COUNTRY ALL V6 3.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1990 TOWN & COUNTRY ALL V6 3.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1991 - 1993 TOWN & COUNTRY ALL V6 3.3 ALL ALL ALL For Federal Models; FWD; Cutting & Welding Required During Installation
1991 - 1993 TOWN & COUNTRY ALL V6 3.3 ALL ALL ALL For Non-California Models; FWD; Cutting & Welding Required During Installation
1994 - 1995 TOWN & COUNTRY ALL V6 3.8 ALL ALL ALL For Federal Models; FWD; Cutting & Welding Required During Installation
1994 - 1995 TOWN & COUNTRY ALL V6 3.8 ALL ALL ALL For Non-California Models; FWD; Cutting & Welding Required During Installation
DODGE
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1995 - 1995 AVENGER ALL V6 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 AVENGER ALL V6 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1995 CARAVAN ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1995 CARAVAN ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1990 CARAVAN ALL L4 2.5 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1990 CARAVAN ALL L4 2.5 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1990 CARAVAN ALL V6 3.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1990 CARAVAN ALL V6 3.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1995 CARAVAN ALL V6 3.3 ALL ALL ALL For Federal Models; FWD; Cutting & Welding Required During Installation
1992 - 1995 CARAVAN ALL V6 3.3 ALL ALL ALL For Non-California Models; FWD; Cutting & Welding Required During Installation
1985 - 1987 CHARGER ALL L4 2.2 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1987 CHARGER ALL L4 2.2 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1984 - 1986 DAYTONA ALL L4 2.2 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1984 - 1986 DAYTONA ALL L4 2.2 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1993 DAYTONA ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1993 DAYTONA ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1993 DYNASTY ALL V6 3.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1993 DYNASTY ALL V6 3.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1995 GRAND CARAVAN ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1995 GRAND CARAVAN ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1990 GRAND CARAVAN ALL V6 3.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1990 GRAND CARAVAN ALL V6 3.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1991 - 1995 GRAND CARAVAN ALL V6 3.3 ALL ALL ALL For Federal Models; FWD; Cutting & Welding Required During Installation
1991 - 1995 GRAND CARAVAN ALL V6 3.3 ALL ALL ALL For Non-California Models; FWD; Cutting & Welding Required During Installation
1994 - 1995 GRAND CARAVAN ALL V6 3.8 ALL ALL ALL For Federal Models; FWD; Cutting & Welding Required During Installation
1994 - 1995 GRAND CARAVAN ALL V6 3.8 ALL ALL ALL For Non-California Models; FWD; Cutting & Welding Required During Installation
1985 - 1989 LANCER ALL L4 2.2 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1989 LANCER ALL L4 2.2 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1988 MINI RAM ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1988 MINI RAM ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1992 MONACO ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1992 MONACO ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1987 SHADOW ALL L4 2.2 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1987 SHADOW ALL L4 2.2 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1992 SHADOW ALL L4 2.5 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1992 SHADOW ALL L4 2.5 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1994 SHADOW ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1994 SHADOW ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1995 SPIRIT ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1995 SPIRIT ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1991 - 1993 STEALTH ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1993 STEALTH ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1996 STEALTH ALL V6 3.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1994 - 1996 STEALTH ALL V6 3.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1995 - 1995 STRATUS ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 STRATUS ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1995 - 1995 STRATUS ALL L4 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 STRATUS ALL L4 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1995 - 1995 STRATUS ALL V6 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 STRATUS ALL V6 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
EAGLE
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1988 - 1989 MEDALLION ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1989 MEDALLION ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1989 PREMIER ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1989 PREMIER ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1992 PREMIER ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1992 PREMIER ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
FORD
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1986 - 1986 AEROSTAR ALL V6 2.8 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1986 - 1986 AEROSTAR ALL V6 2.8 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1986 - 1986 AEROSTAR ALL V6 2.8 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1986 - 1986 AEROSTAR ALL V6 2.8 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1990 - 1995 AEROSTAR ALL V6 4.0 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1990 - 1995 AEROSTAR ALL V6 4.0 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1990 - 1995 AEROSTAR ALL V6 4.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1990 - 1995 AEROSTAR ALL V6 4.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1977 - 1978 E-100 ECONOLINE ALL L6 4.9 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1977 - 1978 E-100 ECONOLINE ALL L6 4.9 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1980 - 1983 F-100 ALL L6 4.9 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1980 - 1983 F-100 ALL L6 4.9 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1980 - 1983 F-100 ALL V8 5.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1980 - 1983 F-100 ALL V8 5.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1980 - 1983 F-150 ALL L6 4.9 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1980 - 1983 F-150 ALL L6 4.9 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1980 - 1980 F-150 ALL V8 5.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1980 - 1980 F-150 ALL V8 5.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1980 - 1981 F-150 ALL V8 5.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1980 - 1981 F-150 ALL V8 5.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1981 - 1983 F-150 ALL V8 5.0 ALL ALL ALL For Federal Models; Federal Emissions Equipped
1981 - 1983 F-150 ALL V8 5.0 ALL ALL ALL For Non-California Models; Federal Emissions Equipped
1980 - 1983 F-250 ALL L6 4.9 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1980 - 1983 F-250 ALL L6 4.9 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1981 - 1983 F-250 ALL V8 5.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1981 - 1983 F-250 ALL V8 5.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 PROBE ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 PROBE ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 PROBE ALL V6 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 PROBE ALL V6 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1995 - 1995 RANGER ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 RANGER ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1990 TAURUS ALL V6 3.8 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1989 - 1990 TAURUS ALL V6 3.8 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
GEO
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1989 - 1994 METRO ALL L3 1.0 N ALL ALL For Federal Models; Standard Trans; Cutting & Welding Required During Installation
1989 - 1994 METRO ALL L3 1.0 N ALL ALL For Non-California Models; Standard Trans; Cutting & Welding Required During Installation
GMC
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1982 - 1985 S15 ALL L4 1.9 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1982 - 1985 S15 ALL L4 1.9 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1982 - 1987 S15 ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1982 - 1987 S15 ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1983 - 1984 S15 ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1983 - 1984 S15 ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1990 S15 ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1990 S15 ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1983 - 1984 S15 JIMMY ALL L4 1.9 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1983 - 1984 S15 JIMMY ALL L4 1.9 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1983 - 1984 S15 JIMMY ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1983 - 1984 S15 JIMMY ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1983 - 1987 S15 JIMMY ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1983 - 1987 S15 JIMMY ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1988 S15 JIMMY ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1988 S15 JIMMY ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1991 - 1993 SONOMA ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1993 SONOMA ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
HONDA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1994 - 1995 PASSPORT ALL L4 2.6 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 PASSPORT ALL L4 2.6 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
JEEP
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1986 - 1995 CHEROKEE ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1995 CHEROKEE ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1995 CHEROKEE ALL L6 4.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1995 CHEROKEE ALL L6 4.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1990 COMANCHE ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1990 COMANCHE ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1992 COMANCHE ALL L6 4.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1992 COMANCHE ALL L6 4.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1987 WAGONEER ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1987 WAGONEER ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1990 WAGONEER ALL L6 4.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1990 WAGONEER ALL L6 4.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1995 WRANGLER ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1995 WRANGLER ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1991 - 1995 WRANGLER ALL L6 4.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1995 WRANGLER ALL L6 4.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
LEXUS
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1993 - 1995 GS300 ALL L6 3.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 GS300 ALL L6 3.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1990 - 1994 LS400 ALL V8 4.0 ALL ALL ALL Position: Front Left; For Federal Models; Cutting & Welding Required During Installation
1990 - 1994 LS400 ALL V8 4.0 ALL ALL ALL Position: Front Left; For Non-California Models; Cutting & Welding Required During Installation
1990 - 1994 LS400 ALL V8 4.0 ALL ALL ALL Position: Front Right; For Federal Models; Cutting & Welding Required During Installation
1990 - 1994 LS400 ALL V8 4.0 ALL ALL ALL Position: Front Right; For Non-California Models; Cutting & Welding Required During Installation
1991 - 1995 LS400 ALL V8 4.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1991 - 1995 LS400 ALL V8 4.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1992 - 1995 SC300 ALL L6 3.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1992 - 1995 SC300 ALL L6 3.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1992 - 1995 SC400 ALL V8 4.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1992 - 1995 SC400 ALL V8 4.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
LINCOLN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1988 - 1990 CONTINENTAL ALL V6 3.8 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1988 - 1990 CONTINENTAL ALL V6 3.8 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
MAZDA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1993 - 1993 626 ALL V6 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1993 626 ALL V6 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1994 626 ALL L4 2.0 N ALL GAS For Federal Models; Standard Trans;
1993 - 1994 626 ALL L4 2.0 N ALL GAS For Non-California Models; Standard Trans;
1994 - 1995 626 ALL V6 2.5 ALL ALL ALL For Federal Models
1994 - 1995 626 ALL V6 2.5 ALL ALL ALL For Non-California Models
1994 - 1995 626 ALL V6 2.5 ALL ALL ALL Position: Rear; For Federal Models; California Emission Equipped
1994 - 1995 626 ALL V6 2.5 ALL ALL ALL Position: Rear; For Non-California Models; California Emission Equipped
1995 - 1995 626 ALL L4 2.0 ALL ALL ALL For Federal Models
1995 - 1995 626 ALL L4 2.0 ALL ALL ALL For Non-California Models
1990 - 1993 B2200 ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1993 B2200 ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1991 - 1993 B2600 ALL L4 2.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1993 B2600 ALL L4 2.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 MIATA ALL L4 1.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 MIATA ALL L4 1.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1994 MPV ALL L4 2.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1994 MPV ALL L4 2.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1993 MPV ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1993 MPV ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 MX-6 ALL V6 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 MX-6 ALL V6 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1994 MX-6 ALL L4 2.0 N ALL GAS For Federal Models; Standard Trans;
1993 - 1994 MX-6 ALL L4 2.0 N ALL GAS For Non-California Models; Standard Trans;
1995 - 1995 MX-6 ALL L4 2.0 ALL ALL ALL For Federal Models
1995 - 1995 MX-6 ALL L4 2.0 ALL ALL ALL For Non-California Models
MERCURY
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1989 - 1990 SABLE ALL V6 3.8 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1989 - 1990 SABLE ALL V6 3.8 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
MERKUR
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1985 - 1989 XR4TI ALL L4 2.3 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1989 XR4TI ALL L4 2.3 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
MITSUBISHI
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1991 - 1995 3000GT ALL V6 3.0 T ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
1991 - 1995 3000GT ALL V6 3.0 T ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 3000GT ALL V6 3.0 N ALL ALL Position: Rear; For Federal Models; Underbody Converter
1994 - 1995 3000GT ALL V6 3.0 N ALL ALL Position: Rear; For Non-California Models; Underbody Converter
1993 - 1993 DIAMANTE ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1993 DIAMANTE ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 DIAMANTE ALL V6 3.0 ALL ALL ALL For Federal Models; Wagon; Cutting & Welding Required During Installation
1994 - 1995 DIAMANTE ALL V6 3.0 ALL ALL ALL For Non-California Models; Wagon; Cutting & Welding Required During Installation
1994 - 1995 DIAMANTE ALL V6 3.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 DIAMANTE ALL V6 3.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1992 - 1994 EXPO ALL L4 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1994 EXPO ALL L4 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1994 EXPO LRV ALL L4 1.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1994 EXPO LRV ALL L4 1.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1994 EXPO LRV ALL L4 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1994 EXPO LRV ALL L4 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1994 GALANT ALL L4 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1994 GALANT ALL L4 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
NISSAN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1990 - 1992 STANZA ALL L4 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1992 STANZA ALL L4 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
OLDSMOBILE
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1986 - 1990 98 ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1990 98 ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1993 ACHIEVA ALL V6 3.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1993 ACHIEVA ALL V6 3.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1987 CALAIS ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1987 CALAIS ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1991 CUTLASS CALAIS ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1991 CUTLASS CALAIS ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1991 CUTLASS CALAIS ALL V6 3.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1991 CUTLASS CALAIS ALL V6 3.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1993 CUTLASS CIERA ALL V6 3.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1993 CUTLASS CIERA ALL V6 3.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1993 CUTLASS CRUISER ALL V6 3.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1993 CUTLASS CRUISER ALL V6 3.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1990 CUTLASS SUPREME ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1990 CUTLASS SUPREME ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 CUTLASS SUPREME ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 CUTLASS SUPREME ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1991 DELTA 88 ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1991 DELTA 88 ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1986 DELTA 88 ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1986 DELTA 88 ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1991 SILHOUETTE ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1991 SILHOUETTE ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 SILHOUETTE ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 SILHOUETTE ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1987 TORONADO ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1987 TORONADO ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
PLYMOUTH
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1992 - 1995 ACCLAIM ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1995 ACCLAIM ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1988 CARAVELLE ALL L4 2.2 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1988 CARAVELLE ALL L4 2.2 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1995 GRAND VOYAGER ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1995 GRAND VOYAGER ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1990 GRAND VOYAGER ALL V6 3.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1990 GRAND VOYAGER ALL V6 3.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1995 GRAND VOYAGER ALL V6 3.3 ALL ALL ALL For Federal Models; FWD; Cutting & Welding Required During Installation
1992 - 1995 GRAND VOYAGER ALL V6 3.3 ALL ALL ALL For Non-California Models; FWD; Cutting & Welding Required During Installation
1994 - 1995 GRAND VOYAGER ALL V6 3.8 ALL ALL ALL For Federal Models; FWD; Cutting & Welding Required During Installation
1994 - 1995 GRAND VOYAGER ALL V6 3.8 ALL ALL ALL For Non-California Models; FWD; Cutting & Welding Required During Installation
1987 - 1987 SUNDANCE ALL L4 2.2 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1987 SUNDANCE ALL L4 2.2 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1991 SUNDANCE ALL L4 2.5 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1991 SUNDANCE ALL L4 2.5 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1994 SUNDANCE ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1994 SUNDANCE ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1995 VOYAGER ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1995 VOYAGER ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1990 VOYAGER ALL L4 2.5 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1990 VOYAGER ALL L4 2.5 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 VOYAGER ALL V6 3.3 ALL ALL ALL For Federal Models; FWD; Cutting & Welding Required During Installation
1993 - 1995 VOYAGER ALL V6 3.3 ALL ALL ALL For Non-California Models; FWD; Cutting & Welding Required During Installation
PONTIAC
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1987 - 1991 BONNEVILLE ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1991 BONNEVILLE ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1989 FIREBIRD ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1989 FIREBIRD ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1991 GRAND AM ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1991 GRAND AM ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1993 GRAND AM ALL V6 3.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1993 GRAND AM ALL V6 3.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1995 GRAND PRIX ALL V6 3.1 ALL ALL ALL For Federal Models; Dual Exhaust
1990 - 1995 GRAND PRIX ALL V6 3.1 ALL ALL ALL For Non-California Models; Dual Exhaust
1994 - 1995 GRAND PRIX ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 GRAND PRIX ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1990 SUNBIRD ALL L4 2.0 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1990 SUNBIRD ALL L4 2.0 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1991 - 1991 TRANS SPORT ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1991 TRANS SPORT ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 TRANS SPORT ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 TRANS SPORT ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
PORSCHE
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1981 - 1983 911 ALL H6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1981 - 1983 911 ALL H6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1981 - 1992 911 ALL H6 3.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1981 - 1992 911 ALL H6 3.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1984 - 1989 911 ALL H6 3.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1984 - 1989 911 ALL H6 3.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1995 911 ALL H6 3.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1995 911 ALL H6 3.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1980 - 1982 924 ALL L4 2.0 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1980 - 1982 924 ALL L4 2.0 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
RENAULT
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1982 - 1983 FUEGO ALL L4 1.6 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1982 - 1983 FUEGO ALL L4 1.6 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1984 - 1984 FUEGO ALL L4 1.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1984 - 1984 FUEGO ALL L4 1.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
SAAB
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1986 - 1990 9000 ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1990 9000 ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1992 9000 ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1992 9000 ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1994 9000 ALL L4 2.3 N ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1994 9000 ALL L4 2.3 N ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1994 9000 ALL L4 2.3 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1994 9000 ALL L4 2.3 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1995 - 1995 9000 ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 9000 ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
SATURN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1991 - 1992 SC ALL L4 1.9 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1992 SC ALL L4 1.9 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 SC1 ALL L4 1.9 ALL ALL ALL For Federal Models; SOHC; Cutting & Welding Required During Installation
1993 - 1995 SC1 ALL L4 1.9 ALL ALL ALL For Non-California Models; SOHC; Cutting & Welding Required During Installation
1991 - 1992 SL ALL L4 1.9 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1992 SL ALL L4 1.9 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 SL ALL L4 1.9 ALL ALL ALL For Federal Models; SOHC; Cutting & Welding Required During Installation
1993 - 1995 SL ALL L4 1.9 ALL ALL ALL For Non-California Models; SOHC; Cutting & Welding Required During Installation
1991 - 1992 SL1 ALL L4 1.9 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1992 SL1 ALL L4 1.9 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 SL1 ALL L4 1.9 ALL ALL ALL For Federal Models; SOHC; Cutting & Welding Required During Installation
1993 - 1995 SL1 ALL L4 1.9 ALL ALL ALL For Non-California Models; SOHC; Cutting & Welding Required During Installation
1991 - 1992 SL2 ALL L4 1.9 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1992 SL2 ALL L4 1.9 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 SW1 ALL L4 1.9 ALL ALL ALL For Federal Models; SOHC; Cutting & Welding Required During Installation
1993 - 1995 SW1 ALL L4 1.9 ALL ALL ALL For Non-California Models; SOHC; Cutting & Welding Required During Installation
SUZUKI
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1993 - 1995 SIDEKICK ALL L4 1.6 ALL ALL ALL For Federal Models; 4-Door; Cutting & Welding Required During Installation
1993 - 1995 SIDEKICK ALL L4 1.6 ALL ALL ALL For Non-California Models; 4-Door; Cutting & Welding Required During Installation
TOYOTA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1995 - 1995 AVALON ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 AVALON ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1991 CAMRY ALL V6 2.5 ALL ALL ALL For Federal Models; Without Air Tube
1988 - 1991 CAMRY ALL V6 2.5 ALL ALL ALL For Non-California Models; Without Air Tube
1995 - 1995 CAMRY ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 CAMRY ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1993 CELICA ALL L4 2.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1990 - 1993 CELICA ALL L4 2.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1981 - 1982 CRESSIDA ALL L6 2.8 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1981 - 1982 CRESSIDA ALL L6 2.8 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1991 - 1993 PREVIA ALL L4 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1993 PREVIA ALL L4 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 PREVIA ALL L4 2.4 N ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 PREVIA ALL L4 2.4 N ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1992 SUPRA ALL L6 3.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1987 - 1992 SUPRA ALL L6 3.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1988 - 1989 VAN ALL L4 2.2 ALL ALL ALL For Federal Models; RWD; Cutting & Welding Required During Installation
1988 - 1989 VAN ALL L4 2.2 ALL ALL ALL For Non-California Models; RWD; Cutting & Welding Required During Installation
VOLVO
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1989 - 1991 780 ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1991 780 ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation

Product Description

MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements.
MagnaFlow Universal Catalytic Converters form the basic building blocks for a comprehensive line of direct-fit applications.

The main benefit of the universal catalytic converter is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting and tube bending equipment that is readily available to most professional installers.

All Federal catalytic converters meet EPA requirements. Federal Catalytic Converters are not legal for sale, installation or use on vehicles registered in the state of California.

All California State Catalytic converters are CARB compliant. Converters in this catalog are based on Executive Orders issued by the California Air Resource Board and must be used in accordance with this information. In California, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size.

  • Stainless steel construction
  • Formulated for Gas and Diesel Applications

Product Reviews

Be the first to review this item.

Rating
Title
Review