MagnaFlow Universal Catalytic Converter; Standard Grade; Meets Federal Requirements; Excl California Models PORSCHE 924


Images May Not be Vehicle Specific. For Display Purposes Only.

Images Of This Specific Part Number

Non-Specific Images

Place Order Here

Part #: 91004
Notes: Universal Catalytic Converter
Standard Grade
Meets Federal Requirements
Excl California Models
MSRP: $93.27
Your Price: $72.07

Specs

Body Length 9
Body Width 5.5
California Air Resources Board Approved No
Catalytic Converter Air Tube Adapter Not Air Tube Kit Adaptable
Catalytic Converter Body Material Stainless
Catalytic Converter Format Pre-Catalytic Converter and Main Catalytic Converter
Catalytic Converter Overall Length 13
Catalytic Converter Oxygen Sensor Location N/A
Inlet Inside Diameter 2
Main Piping Diameter 2
Material Stainless
Outlet Outside Diameter 2
Recommended Use Converter
Substrate Material Ceramic

All Fitments

ALFA ROMEO
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1982 - 1989 SPIDER ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1982 - 1989 SPIDER ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
BUICK
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1982 - 1992 CENTURY ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1982 - 1992 CENTURY ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1989 CENTURY ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1989 CENTURY ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 CENTURY ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 CENTURY ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 CENTURY ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 CENTURY ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1985 ELECTRA ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1985 ELECTRA ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1985 ELECTRA ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1985 ELECTRA ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1989 REGAL ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1989 REGAL ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1995 REGAL ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1995 REGAL ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1984 - 1986 SKYHAWK ALL L4 1.8 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1984 - 1986 SKYHAWK ALL L4 1.8 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1988 SKYHAWK ALL L4 2.0 ALL ALL ALL For Federal Models; w/ 1 Engine VIN; Cutting & Welding Required During Installation
1987 - 1988 SKYHAWK ALL L4 2.0 ALL ALL ALL For Federal Models; w/ K Engine VIN; Cutting & Welding Required During Installation
1987 - 1988 SKYHAWK ALL L4 2.0 ALL ALL ALL For Non-California Models; w/ 1 Engine VIN; Cutting & Welding Required During Installation
1987 - 1988 SKYHAWK ALL L4 2.0 ALL ALL ALL For Non-California Models; w/ K Engine VIN; Cutting & Welding Required During Installation
1989 - 1989 SKYHAWK ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1989 SKYHAWK ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1982 - 1991 SKYLARK ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1982 - 1991 SKYLARK ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1988 SKYLARK ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1988 SKYLARK ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 SKYLARK ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 SKYLARK ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 SKYLARK ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 SKYLARK ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1987 SOMERSET ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1987 SOMERSET ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1987 SOMERSET ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1987 SOMERSET ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1985 SOMERSET REGAL ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1985 SOMERSET REGAL ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1985 SOMERSET REGAL ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1985 SOMERSET REGAL ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
CADILLAC
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1987 - 1988 CIMARRON ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1988 CIMARRON ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
CHEVROLET
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1987 - 1989 BERETTA ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1989 BERETTA ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1989 BERETTA ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1989 BERETTA ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1994 BERETTA ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1994 BERETTA ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1995 BERETTA ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1995 BERETTA ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1995 BERETTA ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1995 BERETTA ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1982 - 1986 CAMARO ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1982 - 1986 CAMARO ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1986 CAVALIER ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1986 CAVALIER ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1989 CAVALIER ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1989 CAVALIER ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1995 CAVALIER ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1995 CAVALIER ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1991 - 1994 CAVALIER ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1994 CAVALIER ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1995 - 1995 CAVALIER ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 CAVALIER ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1982 - 1990 CELEBRITY ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1982 - 1990 CELEBRITY ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1986 CELEBRITY ALL V6 2.8 ALL ALL ALL For Federal Models; w/ W Engine VIN; Cutting & Welding Required During Installation
1986 - 1986 CELEBRITY ALL V6 2.8 ALL ALL ALL For Non-California Models; w/ W Engine VIN; Cutting & Welding Required During Installation
1987 - 1989 CELEBRITY ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1989 CELEBRITY ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1990 CELEBRITY ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1990 CELEBRITY ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1989 CORSICA ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1989 CORSICA ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1989 CORSICA ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1989 CORSICA ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1995 CORSICA ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1995 CORSICA ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1995 CORSICA ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1995 CORSICA ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1995 LUMINA ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1995 LUMINA ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1992 LUMINA ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1992 LUMINA ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1993 LUMINA ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1993 LUMINA ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1995 - 1995 MONTE CARLO ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 MONTE CARLO ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 S10 ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 S10 ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1986 SPRINT ALL L3 1.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1986 SPRINT ALL L3 1.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1988 SPRINT ALL L3 1.0 N ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1988 SPRINT ALL L3 1.0 N ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1991 SPRINT ALL L3 1.0 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1991 SPRINT ALL L3 1.0 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
CHRYSLER
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1987 - 1989 CONQUEST ALL L4 2.6 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1987 - 1989 CONQUEST ALL L4 2.6 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1984 - 1984 E CLASS ALL L4 2.2 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1984 - 1984 E CLASS ALL L4 2.2 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1984 - 1986 LEBARON ALL L4 2.2 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1984 - 1986 LEBARON ALL L4 2.2 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1986 - 1986 LEBARON ALL L4 2.2 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1986 LEBARON ALL L4 2.2 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1984 - 1986 NEW YORKER ALL L4 2.2 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1984 - 1986 NEW YORKER ALL L4 2.2 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1989 - 1990 TC MASERATI ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1990 TC MASERATI ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1991 TC MASERATI ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1991 TC MASERATI ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
DAIHATSU
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1990 - 1992 ROCKY ALL L4 1.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1992 ROCKY ALL L4 1.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
DODGE
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1984 - 1985 600 ALL L4 2.2 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1984 - 1985 600 ALL L4 2.2 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1985 ARIES ALL L4 2.2 ALL ALL ALL For Federal Models; w/ D Engine VIN; Cutting & Welding Required During Installation
1985 - 1985 ARIES ALL L4 2.2 ALL ALL ALL For Non-California Models; w/ D Engine VIN; Cutting & Welding Required During Installation
1988 - 1995 CARAVAN ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1995 CARAVAN ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1990 CARAVAN ALL L4 2.5 N ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1990 CARAVAN ALL L4 2.5 N ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1991 COLT ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1991 COLT ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1990 COLT ALL L4 1.5 ALL ALL ALL For Federal Models; Wagon; Cutting & Welding Required During Installation
1989 - 1990 COLT ALL L4 1.5 ALL ALL ALL For Non-California Models; Wagon; Cutting & Welding Required During Installation
1984 - 1986 CONQUEST ALL L4 2.6 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1984 - 1986 CONQUEST ALL L4 2.6 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1989 - 1989 DAKOTA ALL L4 2.5 ALL ALL ALL For Federal Models; 112.0in Wheelbase; Cutting & Welding Required During Installation
1989 - 1989 DAKOTA ALL L4 2.5 ALL ALL ALL For Federal Models; 124.0in Wheelbase; Cutting & Welding Required During Installation
1989 - 1989 DAKOTA ALL L4 2.5 ALL ALL ALL For Non-California Models; 112.0in Wheelbase; Cutting & Welding Required During Installation
1989 - 1989 DAKOTA ALL L4 2.5 ALL ALL ALL For Non-California Models; 124.0in Wheelbase; Cutting & Welding Required During Installation
1990 - 1992 DAKOTA ALL L4 2.5 ALL ALL ALL For Federal Models; 131.0in Wheelbase; Cutting & Welding Required During Installation
1990 - 1992 DAKOTA ALL L4 2.5 ALL ALL ALL For Non-California Models; 131.0in Wheelbase; Cutting & Welding Required During Installation
1993 - 1995 DAKOTA ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 DAKOTA ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1993 DYNASTY ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1993 DYNASTY ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1988 GRAND CARAVAN ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1988 GRAND CARAVAN ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1986 LANCER ALL L4 2.2 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1985 - 1986 LANCER ALL L4 2.2 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1991 - 1991 RAM 50 ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1991 RAM 50 ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1990 SHADOW ALL L4 2.2 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1990 SHADOW ALL L4 2.2 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
EAGLE
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1990 - 1994 TALON ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1994 TALON ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1994 TALON ALL L4 1.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1994 TALON ALL L4 1.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
FORD
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1986 - 1995 AEROSTAR ALL V6 3.0 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1986 - 1995 AEROSTAR ALL V6 3.0 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1986 - 1995 AEROSTAR ALL V6 3.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1986 - 1995 AEROSTAR ALL V6 3.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1986 - 1987 AEROSTAR ALL L4 2.3 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1986 - 1987 AEROSTAR ALL L4 2.3 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1986 - 1987 AEROSTAR ALL L4 2.3 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1986 - 1987 AEROSTAR ALL L4 2.3 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 ASPIRE ALL L4 1.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 ASPIRE ALL L4 1.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1995 - 1995 CONTOUR ALL V6 2.5 ALL ALL ALL Position: Rear; For Federal Models; Automatic Trans; Cutting & Welding Required During Installation
1995 - 1995 CONTOUR ALL V6 2.5 ALL ALL ALL Position: Rear; For Non-California Models; Automatic Trans; Cutting & Welding Required During Installation
1991 - 1995 ESCORT ALL L4 1.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1995 ESCORT ALL L4 1.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 MUSTANG ALL V6 3.8 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 MUSTANG ALL V6 3.8 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 MUSTANG ALL V6 3.8 ALL ALL ALL Position: Rear Right; For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 MUSTANG ALL V6 3.8 ALL ALL ALL Position: Rear Right; For Non-California Models; Cutting & Welding Required During Installation
1989 - 1992 PROBE ALL L4 2.2 ALL ALL ALL For Federal Models; Automatic Trans; Cutting & Welding Required During Installation
1989 - 1992 PROBE ALL L4 2.2 ALL ALL ALL For Federal Models; Standard Trans; Cutting & Welding Required During Installation
1989 - 1992 PROBE ALL L4 2.2 ALL ALL ALL For Non-California Models; Automatic Trans; Cutting & Welding Required During Installation
1989 - 1992 PROBE ALL L4 2.2 ALL ALL ALL For Non-California Models; Standard Trans; Cutting & Welding Required During Installation
1990 - 1992 PROBE ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1992 PROBE ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1987 RANGER ALL L4 2.3 ALL ALL GAS For Federal Models; Cutting & Welding Required During Installation
1986 - 1987 RANGER ALL L4 2.3 ALL ALL GAS For Non-California Models; Cutting & Welding Required During Installation
1987 - 1987 RANGER ALL L4 2.3 ALL ALL ALL For Federal Models; Standard Trans; Cutting & Welding Required During Installation
1987 - 1987 RANGER ALL L4 2.3 ALL ALL ALL For Non-California Models; Standard Trans; Cutting & Welding Required During Installation
1987 - 1987 RANGER ALL L4 2.3 ALL ALL GAS For Federal Models; Extended Cab Pickup; Automatic Trans; 125.0in Wheelbase; Cutting & Welding Required During Installation
1987 - 1987 RANGER ALL L4 2.3 ALL ALL GAS For Federal Models; Standard Cab Pickup; Cutting & Welding Required During Installation
1987 - 1987 RANGER ALL L4 2.3 ALL ALL GAS For Non-California Models; Extended Cab Pickup; Automatic Trans; 125.0in Wheelbase; Cutting & Welding Required During Installation
1987 - 1987 RANGER ALL L4 2.3 ALL ALL GAS For Non-California Models; Standard Cab Pickup; Cutting & Welding Required During Installation
1988 - 1988 RANGER ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1988 RANGER ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1994 TEMPO ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1994 TEMPO ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
GEO
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1989 - 1990 METRO ALL L3 1.0 N ALL ALL For Federal Models; Automatic Trans; With Sway Bar
1989 - 1990 METRO ALL L3 1.0 N ALL ALL For Non-California Models; Automatic Trans; With Sway Bar
1991 - 1994 METRO ALL L3 1.0 ALL ALL ALL For Federal Models; Automatic Trans; With Sway Bar
1991 - 1994 METRO ALL L3 1.0 ALL ALL ALL For Non-California Models; Automatic Trans; With Sway Bar
1990 - 1991 STORM ALL L4 1.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1991 STORM ALL L4 1.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
GMC
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1994 - 1995 SONOMA ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 SONOMA ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
HONDA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1995 - 1995 ODYSSEY ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 ODYSSEY ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
HYUNDAI
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1992 - 1995 ELANTRA ALL L4 1.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1995 ELANTRA ALL L4 1.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 ELANTRA ALL L4 1.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 ELANTRA ALL L4 1.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 SCOUPE ALL L4 1.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 SCOUPE ALL L4 1.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1991 SONATA ALL L4 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1991 SONATA ALL L4 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1995 SONATA ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1995 SONATA ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1995 SONATA ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1995 SONATA ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
INFINITI
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1991 - 1994 G20 ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1994 G20 ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1992 M30 ALL V6 3.0 ALL ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
1990 - 1992 M30 ALL V6 3.0 ALL ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
1990 - 1992 M30 ALL V6 3.0 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
1990 - 1992 M30 ALL V6 3.0 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
ISUZU
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1989 - 1989 I-MARK ALL L4 1.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1989 I-MARK ALL L4 1.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1991 - 1993 STYLUS ALL L4 1.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1993 STYLUS ALL L4 1.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1992 STYLUS ALL L4 1.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1992 STYLUS ALL L4 1.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
JAGUAR
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1990 - 1994 VANDEN PLAS ALL L6 4.0 ALL ALL ALL Position: Rear Left; For Federal Models; Cutting & Welding Required During Installation
1990 - 1994 VANDEN PLAS ALL L6 4.0 ALL ALL ALL Position: Rear Left; For Non-California Models; Cutting & Welding Required During Installation
1990 - 1994 VANDEN PLAS ALL L6 4.0 ALL ALL ALL Position: Rear Right; For Federal Models; Cutting & Welding Required During Installation
1990 - 1994 VANDEN PLAS ALL L6 4.0 ALL ALL ALL Position: Rear Right; For Non-California Models; Cutting & Welding Required During Installation
1990 - 1994 XJ6 ALL L6 4.0 ALL ALL ALL Position: Rear Left; For Federal Models; Cutting & Welding Required During Installation
1990 - 1994 XJ6 ALL L6 4.0 ALL ALL ALL Position: Rear Left; For Non-California Models; Cutting & Welding Required During Installation
1990 - 1994 XJ6 ALL L6 4.0 ALL ALL ALL Position: Rear Right; For Federal Models; Cutting & Welding Required During Installation
1990 - 1994 XJ6 ALL L6 4.0 ALL ALL ALL Position: Rear Right; For Non-California Models; Cutting & Welding Required During Installation
1993 - 1996 XJS ALL L6 4.0 ALL ALL ALL Position: Rear Left; For Federal Models; Cutting & Welding Required During Installation
1993 - 1996 XJS ALL L6 4.0 ALL ALL ALL Position: Rear Left; For Non-California Models; Cutting & Welding Required During Installation
1993 - 1996 XJS ALL L6 4.0 ALL ALL ALL Position: Rear Right; For Federal Models; Cutting & Welding Required During Installation
1993 - 1996 XJS ALL L6 4.0 ALL ALL ALL Position: Rear Right; For Non-California Models; Cutting & Welding Required During Installation
KIA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1994 - 1995 SEPHIA ALL L4 1.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 SEPHIA ALL L4 1.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
LAND ROVER
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1987 - 1988 RANGE ROVER ALL V8 3.5 ALL ALL ALL Position: Front Left; For Federal Models; Cutting & Welding Required During Installation
1987 - 1988 RANGE ROVER ALL V8 3.5 ALL ALL ALL Position: Front Left; For Non-California Models; Cutting & Welding Required During Installation
1987 - 1988 RANGE ROVER ALL V8 3.5 ALL ALL ALL Position: Front Right; For Federal Models; Cutting & Welding Required During Installation
1987 - 1988 RANGE ROVER ALL V8 3.5 ALL ALL ALL Position: Front Right; For Non-California Models; Cutting & Welding Required During Installation
LEXUS
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1990 - 1991 ES250 ALL V6 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1991 ES250 ALL V6 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1992 - 1995 SC400 ALL V8 4.0 ALL ALL ALL Position: Front Left; For Federal Models; California Emission Equipped
1992 - 1995 SC400 ALL V8 4.0 ALL ALL ALL Position: Front Left; For Non-California Models; California Emission Equipped
1992 - 1995 SC400 ALL V8 4.0 ALL ALL ALL Position: Front Right; For Federal Models; Cutting & Welding Required During Installation
1992 - 1995 SC400 ALL V8 4.0 ALL ALL ALL Position: Front Right; For Non-California Models; Cutting & Welding Required During Installation
1992 - 1994 SC400 ALL V8 4.0 ALL ALL ALL Position: Left; For Federal Models
1992 - 1994 SC400 ALL V8 4.0 ALL ALL ALL Position: Left; For Non-California Models
1992 - 1994 SC400 ALL V8 4.0 ALL ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
1992 - 1994 SC400 ALL V8 4.0 ALL ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
LOTUS
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1990 - 1992 ELAN ALL L4 1.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1992 ELAN ALL L4 1.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1980 - 1995 ESPRIT ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1980 - 1995 ESPRIT ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
MAZDA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1986 - 1994 323 ALL L4 1.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1994 323 ALL L4 1.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1989 323 ALL L4 1.6 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1989 323 ALL L4 1.6 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1989 626 ALL L4 2.2 ALL ALL ALL For Federal Models; Standard Trans; Cutting & Welding Required During Installation
1988 - 1989 626 ALL L4 2.2 ALL ALL ALL For Non-California Models; Standard Trans; Cutting & Welding Required During Installation
1988 - 1989 626 ALL L4 2.2 N ALL ALL For Federal Models; Automatic Trans; Cutting & Welding Required During Installation
1988 - 1989 626 ALL L4 2.2 N ALL ALL For Non-California Models; Automatic Trans; Cutting & Welding Required During Installation
1988 - 1991 626 ALL L4 2.2 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1991 626 ALL L4 2.2 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1992 626 ALL L4 2.2 N ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1992 626 ALL L4 2.2 N ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 626 ALL L4 2.0 ALL ALL ALL Position: Rear; For Federal Models; California Emission Equipped
1994 - 1995 626 ALL L4 2.0 ALL ALL ALL Position: Rear; For Non-California Models; California Emission Equipped
1988 - 1989 929 ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1989 929 ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1991 929 ALL V6 3.0 ALL ALL ALL For Federal Models; SOHC; Cutting & Welding Required During Installation
1990 - 1991 929 ALL V6 3.0 ALL ALL ALL For Non-California Models; SOHC; Cutting & Welding Required During Installation
1994 - 1995 B2300 ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 B2300 ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1990 B2600 ALL L4 2.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1990 B2600 ALL L4 2.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 B3000 ALL V6 3.0 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 B3000 ALL V6 3.0 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 B3000 ALL V6 3.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 B3000 ALL V6 3.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1994 - 1994 B4000 ALL V6 4.0 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1994 - 1994 B4000 ALL V6 4.0 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1994 - 1994 B4000 ALL V6 4.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1994 - 1994 B4000 ALL V6 4.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1994 - 1994 MPV ALL V6 3.0 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1994 - 1994 MPV ALL V6 3.0 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1994 - 1994 MPV ALL V6 3.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1994 - 1994 MPV ALL V6 3.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1988 - 1989 MX-6 ALL L4 2.2 ALL ALL ALL For Federal Models; Automatic Trans; Cutting & Welding Required During Installation
1988 - 1989 MX-6 ALL L4 2.2 ALL ALL ALL For Federal Models; Standard Trans; Cutting & Welding Required During Installation
1988 - 1989 MX-6 ALL L4 2.2 ALL ALL ALL For Non-California Models; Automatic Trans; Cutting & Welding Required During Installation
1988 - 1989 MX-6 ALL L4 2.2 ALL ALL ALL For Non-California Models; Standard Trans; Cutting & Welding Required During Installation
1990 - 1992 MX-6 ALL L4 2.2 N ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1992 MX-6 ALL L4 2.2 N ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1992 MX-6 ALL L4 2.2 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1992 MX-6 ALL L4 2.2 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1995 - 1995 MX-6 ALL L4 2.0 ALL ALL ALL Position: Rear; For Federal Models; California Emission Equipped
1995 - 1995 MX-6 ALL L4 2.0 ALL ALL ALL Position: Rear; For Non-California Models; California Emission Equipped
1990 - 1991 PROTEGE 4WD L4 1.8 ALL ALL ALL For Federal Models; 4WD; Cutting & Welding Required During Installation
1990 - 1991 PROTEGE 4WD L4 1.8 ALL ALL ALL For Non-California Models; 4WD; Cutting & Welding Required During Installation
1992 - 1995 PROTEGE ALL L4 1.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1995 PROTEGE ALL L4 1.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
MERCURY
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1991 - 1994 CAPRI ALL L4 1.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1994 CAPRI ALL L4 1.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1995 - 1995 MYSTIQUE ALL V6 2.5 ALL ALL ALL Position: Rear; For Federal Models; Automatic Trans; Cutting & Welding Required During Installation
1995 - 1995 MYSTIQUE ALL V6 2.5 ALL ALL ALL Position: Rear; For Non-California Models; Automatic Trans; Cutting & Welding Required During Installation
1992 - 1994 TOPAZ ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1994 TOPAZ ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1989 TRACER ALL L4 1.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1989 TRACER ALL L4 1.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1991 - 1995 TRACER ALL L4 1.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1995 TRACER ALL L4 1.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
MITSUBISHI
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1991 - 1992 3000GT ALL V6 3.0 N ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1992 3000GT ALL V6 3.0 N ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 3000GT ALL V6 3.0 ALL ALL ALL For Federal Models
1993 - 1995 3000GT ALL V6 3.0 ALL ALL ALL For Non-California Models
1990 - 1994 ECLIPSE ALL L4 1.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1994 ECLIPSE ALL L4 1.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1994 ECLIPSE ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1994 ECLIPSE ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1986 GALANT ALL L4 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1986 GALANT ALL L4 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1993 GALANT ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1993 GALANT ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1994 MIGHTY MAX ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1994 MIGHTY MAX ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1994 MONTERO ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1994 MONTERO ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1995 - 1995 MONTERO ALL V6 3.0 ALL ALL ALL For Federal Models
1995 - 1995 MONTERO ALL V6 3.0 ALL ALL ALL For Non-California Models
1995 - 1995 MONTERO ALL V6 3.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 MONTERO ALL V6 3.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1983 - 1989 STARION ALL L4 2.6 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1983 - 1989 STARION ALL L4 2.6 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
NISSAN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1993 - 1994 ALTIMA ALL L4 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1994 ALTIMA ALL L4 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1995 - 1997 ALTIMA ALL L4 2.4 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1995 - 1997 ALTIMA ALL L4 2.4 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1982 - 1983 SENTRA ALL L4 1.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1982 - 1983 SENTRA ALL L4 1.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1987 SENTRA ALL L4 1.6 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1986 - 1987 SENTRA ALL L4 1.6 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1987 - 1987 SENTRA ALL L4 1.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1987 SENTRA ALL L4 1.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
OLDSMOBILE
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1985 - 1985 98 ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1985 98 ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1985 98 ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1985 98 ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 ACHIEVA ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 ACHIEVA ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 ACHIEVA ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 ACHIEVA ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1987 CALAIS ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1987 CALAIS ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1987 CALAIS ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1987 CALAIS ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1991 CUTLASS CALAIS ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1991 CUTLASS CALAIS ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1989 CUTLASS CALAIS ALL V6 3.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1989 CUTLASS CALAIS ALL V6 3.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1983 - 1992 CUTLASS CIERA ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1983 - 1992 CUTLASS CIERA ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1986 CUTLASS CIERA ALL V6 2.8 ALL ALL ALL For Federal Models; w/ W Engine VIN; Cutting & Welding Required During Installation
1986 - 1986 CUTLASS CIERA ALL V6 2.8 ALL ALL ALL For Non-California Models; w/ W Engine VIN; Cutting & Welding Required During Installation
1986 - 1988 CUTLASS CIERA ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1988 CUTLASS CIERA ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1989 CUTLASS CIERA ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1989 CUTLASS CIERA ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 CUTLASS CIERA ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 CUTLASS CIERA ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 CUTLASS CIERA ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 CUTLASS CIERA ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1989 CUTLASS CRUISER ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1989 CUTLASS CRUISER ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1988 CUTLASS CRUISER ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1988 CUTLASS CRUISER ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1990 CUTLASS CRUISER ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1990 CUTLASS CRUISER ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1994 CUTLASS CRUISER ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1994 CUTLASS CRUISER ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1989 CUTLASS SUPREME ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1989 CUTLASS SUPREME ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1993 CUTLASS SUPREME ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1993 CUTLASS SUPREME ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1987 FIRENZA ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1987 FIRENZA ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1988 FIRENZA ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1988 FIRENZA ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1982 - 1984 OMEGA ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1982 - 1984 OMEGA ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1992 TORONADO ALL V6 3.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1992 TORONADO ALL V6 3.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
PLYMOUTH
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1985 - 1986 CARAVELLE ALL L4 2.2 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1985 - 1986 CARAVELLE ALL L4 2.2 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1987 - 1991 COLT ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1991 COLT ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1990 COLT ALL L4 1.5 ALL ALL ALL For Federal Models; Wagon; Cutting & Welding Required During Installation
1989 - 1990 COLT ALL L4 1.5 ALL ALL ALL For Non-California Models; Wagon; Cutting & Welding Required During Installation
1984 - 1986 CONQUEST ALL L4 2.6 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1984 - 1986 CONQUEST ALL L4 2.6 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1988 - 1988 GRAND VOYAGER ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1988 GRAND VOYAGER ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1994 LASER ALL L4 1.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1994 LASER ALL L4 1.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1994 LASER ALL L4 2.0 N ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1994 LASER ALL L4 2.0 N ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1994 LASER ALL L4 2.0 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1990 - 1994 LASER ALL L4 2.0 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1995 VOYAGER ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1995 VOYAGER ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1990 VOYAGER ALL L4 2.5 N ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1990 VOYAGER ALL L4 2.5 N ALL ALL For Non-California Models; Cutting & Welding Required During Installation
PONTIAC
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1982 - 1991 6000 ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1982 - 1991 6000 ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1986 6000 ALL V6 2.8 ALL ALL ALL For Federal Models; w/ W Engine VIN; Cutting & Welding Required During Installation
1986 - 1986 6000 ALL V6 2.8 ALL ALL ALL For Non-California Models; w/ W Engine VIN; Cutting & Welding Required During Installation
1987 - 1989 6000 ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1989 6000 ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1991 6000 ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1991 6000 ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1982 - 1986 FIREBIRD ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1982 - 1986 FIREBIRD ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1987 GRAND AM ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1987 GRAND AM ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1991 GRAND AM ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1991 GRAND AM ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1989 GRAND AM ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1989 GRAND AM ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1995 GRAND AM ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 GRAND AM ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 GRAND AM ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 GRAND AM ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1989 GRAND PRIX ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1989 GRAND PRIX ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1990 GRAND PRIX ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1990 GRAND PRIX ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1991 - 1993 GRAND PRIX ALL V6 3.1 ALL ALL ALL For Federal Models; Except Dual Exhaust
1991 - 1993 GRAND PRIX ALL V6 3.1 ALL ALL ALL For Non-California Models; Except Dual Exhaust
1984 - 1985 J2000 SUNBIRD ALL L4 1.8 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1984 - 1985 J2000 SUNBIRD ALL L4 1.8 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1993 LEMANS ALL L4 1.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1993 LEMANS ALL L4 1.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1990 LEMANS ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1990 LEMANS ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1986 SUNBIRD ALL L4 1.8 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1986 SUNBIRD ALL L4 1.8 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1990 SUNBIRD ALL L4 2.0 N ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1990 SUNBIRD ALL L4 2.0 N ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1991 - 1994 SUNBIRD ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1994 SUNBIRD ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1991 - 1994 SUNBIRD ALL V6 3.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1994 SUNBIRD ALL V6 3.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1995 - 1995 SUNFIRE ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 SUNFIRE ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1995 - 1995 SUNFIRE ALL L4 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 SUNFIRE ALL L4 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
PORSCHE
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1980 - 1982 924 ALL L4 2.0 N ALL ALL For Federal Models; Cutting & Welding Required During Installation
1980 - 1982 924 ALL L4 2.0 N ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1988 924 ALL L4 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1988 924 ALL L4 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1988 944 ALL L4 2.5 N ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1988 944 ALL L4 2.5 N ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1989 944 ALL L4 2.7 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1989 944 ALL L4 2.7 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
RENAULT
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1983 - 1987 ALLIANCE ALL L4 1.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1983 - 1987 ALLIANCE ALL L4 1.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1987 ALLIANCE ALL L4 1.7 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1987 ALLIANCE ALL L4 1.7 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1987 ALLIANCE ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1987 ALLIANCE ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1984 - 1986 ENCORE ALL L4 1.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1984 - 1986 ENCORE ALL L4 1.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1986 ENCORE ALL L4 1.7 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1985 - 1986 ENCORE ALL L4 1.7 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1984 - 1985 FUEGO ALL L4 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1984 - 1985 FUEGO ALL L4 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
SAAB
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1994 - 1994 900 ALL L4 2.1 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1994 900 ALL L4 2.1 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
SATURN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1993 - 1995 SC2 ALL L4 1.9 ALL ALL ALL For Federal Models; DOHC; Cutting & Welding Required During Installation
1993 - 1995 SC2 ALL L4 1.9 ALL ALL ALL For Non-California Models; DOHC; Cutting & Welding Required During Installation
1993 - 1995 SL2 ALL L4 1.9 ALL ALL ALL For Federal Models; DOHC; Cutting & Welding Required During Installation
1993 - 1995 SL2 ALL L4 1.9 ALL ALL ALL For Non-California Models; DOHC; Cutting & Welding Required During Installation
1993 - 1995 SW2 ALL L4 1.9 ALL ALL ALL For Federal Models; DOHC; Cutting & Welding Required During Installation
1993 - 1995 SW2 ALL L4 1.9 ALL ALL ALL For Non-California Models; DOHC; Cutting & Welding Required During Installation
SUBARU
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1984 - 1984 DL ALL H4 1.8 ALL ALL ALL For Federal Models; 4WD; California Emission Equipped
1984 - 1984 DL ALL H4 1.8 ALL ALL ALL For Non-California Models; 4WD; California Emission Equipped
1985 - 1987 DL ALL H4 1.8 ALL ALL ALL Position: Rear; For Federal Models; 4WD; California Emission Equipped
1985 - 1987 DL ALL H4 1.8 ALL ALL ALL Position: Rear; For Non-California Models; 4WD; California Emission Equipped
1988 - 1989 DL ALL H4 1.8 ALL ALL ALL Position: Rear; For Federal Models; 4WD; Cutting & Welding Required During Installation
1988 - 1989 DL ALL H4 1.8 ALL ALL ALL Position: Rear; For Non-California Models; 4WD; Cutting & Welding Required During Installation
1983 - 1989 GL ALL H4 1.8 ALL ALL ALL Position: Rear; For Federal Models; 4WD; Cutting & Welding Required During Installation
1983 - 1989 GL ALL H4 1.8 ALL ALL ALL Position: Rear; For Non-California Models; 4WD; Cutting & Welding Required During Installation
1987 - 1987 GL ALL H4 1.8 ALL ALL ALL Position: Rear; For Federal Models; 4WD; California Emission Equipped
1987 - 1987 GL ALL H4 1.8 ALL ALL ALL Position: Rear; For Non-California Models; 4WD; California Emission Equipped
1988 - 1988 GL ALL H4 1.8 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1988 - 1988 GL ALL H4 1.8 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1985 - 1988 GL-10 ALL H4 1.8 ALL ALL ALL Position: Rear; For Federal Models; 4WD; Cutting & Welding Required During Installation
1985 - 1988 GL-10 ALL H4 1.8 ALL ALL ALL Position: Rear; For Non-California Models; 4WD; Cutting & Welding Required During Installation
1989 - 1989 GL-10 ALL H4 1.8 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1989 - 1989 GL-10 ALL H4 1.8 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1993 - 1997 IMPREZA ALL H4 1.8 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1993 - 1997 IMPREZA ALL H4 1.8 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1987 - 1994 JUSTY ALL L3 1.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1994 JUSTY ALL L3 1.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1991 - 1994 LEGACY ALL H4 2.2 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1991 - 1994 LEGACY ALL H4 2.2 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1990 - 1994 LOYALE ALL H4 1.8 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1990 - 1994 LOYALE ALL H4 1.8 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1986 - 1987 XT ALL H4 1.8 ALL ALL ALL Position: Rear; For Federal Models; 4WD; Cutting & Welding Required During Installation
1986 - 1987 XT ALL H4 1.8 ALL ALL ALL Position: Rear; For Non-California Models; 4WD; Cutting & Welding Required During Installation
1989 - 1991 XT ALL H4 1.8 ALL ALL ALL For Federal Models; 4WD; Cutting & Welding Required During Installation
1989 - 1991 XT ALL H4 1.8 ALL ALL ALL For Non-California Models; 4WD; Cutting & Welding Required During Installation
1989 - 1991 XT ALL H6 2.7 ALL ALL ALL For Federal Models; 4WD; Cutting & Welding Required During Installation
1989 - 1991 XT ALL H6 2.7 ALL ALL ALL For Non-California Models; 4WD; Cutting & Welding Required During Installation
SUZUKI
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1995 - 1995 ESTEEM ALL L4 1.6 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 ESTEEM ALL L4 1.6 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1986 - 1995 SAMURAI ALL L4 1.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1995 SAMURAI ALL L4 1.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1991 - 1992 SIDEKICK ALL L4 1.6 ALL ALL ALL For Federal Models; 4-Door; Cutting & Welding Required During Installation
1991 - 1992 SIDEKICK ALL L4 1.6 ALL ALL ALL For Non-California Models; 4-Door; Cutting & Welding Required During Installation
1993 - 1994 SWIFT GT L4 1.3 ALL ALL ALL For Federal Models; DOHC; Cutting & Welding Required During Installation
1993 - 1994 SWIFT GT L4 1.3 ALL ALL ALL For Non-California Models; DOHC; Cutting & Welding Required During Installation
TOYOTA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1988 - 1995 4RUNNER ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1995 4RUNNER ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1991 CAMRY ALL L4 2.0 ALL ALL ALL For Federal Models; 4WD; Cutting & Welding Required During Installation
1988 - 1991 CAMRY ALL L4 2.0 ALL ALL ALL For Non-California Models; 4WD; Cutting & Welding Required During Installation
1990 - 1993 CELICA ALL L4 2.2 ALL ALL ALL Position: Rear; For Federal Models; California Emission Equipped
1990 - 1993 CELICA ALL L4 2.2 ALL ALL ALL Position: Rear; For Non-California Models; California Emission Equipped
1991 - 1995 MR2 ALL L4 2.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1991 - 1995 MR2 ALL L4 2.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1991 - 1995 MR2 ALL L4 2.2 ALL ALL ALL Position: Rear; For Federal Models; California Emission Equipped
1991 - 1995 MR2 ALL L4 2.2 ALL ALL ALL Position: Rear; For Non-California Models; California Emission Equipped
1988 - 1995 PICKUP ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1988 - 1995 PICKUP ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 PREVIA ALL L4 2.4 S ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 PREVIA ALL L4 2.4 S ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1994 - 1995 PREVIA ALL L4 2.4 S ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 PREVIA ALL L4 2.4 S ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1995 - 1995 TERCEL ALL L4 1.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1995 - 1995 TERCEL ALL L4 1.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
VOLKSWAGEN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1993 - 1995 EUROVAN ALL L5 2.5 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1993 - 1995 EUROVAN ALL L5 2.5 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation

Product Description

MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements.
MagnaFlow Universal Catalytic Converters form the basic building blocks for a comprehensive line of direct-fit applications.

The main benefit of the universal catalytic converter is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting and tube bending equipment that is readily available to most professional installers.

All Federal catalytic converters meet EPA requirements. Federal Catalytic Converters are not legal for sale, installation or use on vehicles registered in the state of California.

All California State Catalytic converters are CARB compliant. Converters in this catalog are based on Executive Orders issued by the California Air Resource Board and must be used in accordance with this information. In California, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size.

  • Stainless steel construction
  • Formulated for Gas and Diesel Applications

Product Reviews

Be the first to review this item.

Rating
Title
Review