MagnaFlow Universal Catalytic Converter; Standard Grade; Meets Federal Requirements; Excl California Models AUDI 5000


Images May Not be Vehicle Specific. For Display Purposes Only.

Images Of This Specific Part Number

Non-Specific Images

Place Order Here

Part #: 53006
Notes: Universal Catalytic Converter
Standard Grade
Meets Federal Requirements
Excl California Models
MSRP: $91.98
Your Price: $71.08

Specs

Body Length 9
Body Width 4.375
California Air Resources Board Approved No
Catalytic Converter Air Tube Adapter Not Air Tube Kit Adaptable
Catalytic Converter Body Material Stainless
Catalytic Converter Format Pre-Catalytic Converter and Main Catalytic Converter
Catalytic Converter Overall Length 13
Catalytic Converter Oxygen Sensor Location N/A
Inlet Inside Diameter 2.5
Main Piping Diameter 2.5
Material Stainless
Outlet Outside Diameter 2.5
Recommended Use Converter
Substrate Material Ceramic

All Fitments

AUDI
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1990 - 1991 100 ALL L5 2.3 ALL ALL ALL For Federal Models; Automatic Trans; 4-Speed Trans; Cutting & Welding Required During Installation
1990 - 1991 100 ALL L5 2.3 ALL ALL ALL For Non-California Models; Automatic Trans; 4-Speed Trans; Cutting & Welding Required During Installation
1980 - 1984 5000 ALL L5 2.2 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1980 - 1984 5000 ALL L5 2.2 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1985 - 1988 5000 ALL L5 2.2 T ALL ALL For Federal Models; Automatic Trans; Cutting & Welding Required During Installation
1985 - 1988 5000 ALL L5 2.2 T ALL ALL For Non-California Models; Automatic Trans; Cutting & Welding Required During Installation
1987 - 1988 5000 ALL L5 2.3 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1988 5000 ALL L5 2.3 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1988 5000 QUATTRO CS L5 2.2 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1988 5000 QUATTRO CS L5 2.2 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
FORD
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1988 - 1989 BRONCO II ALL V6 2.9 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1988 - 1989 BRONCO II ALL V6 2.9 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1988 - 1989 BRONCO II ALL V6 2.9 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1988 - 1989 BRONCO II ALL V6 2.9 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1988 - 1989 RANGER ALL V6 2.9 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1988 - 1989 RANGER ALL V6 2.9 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
1988 - 1988 RANGER ALL V6 2.9 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1988 - 1988 RANGER ALL V6 2.9 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
ISUZU
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1993 - 1993 RODEO ALL V6 3.2 ALL ALL ALL For Federal Models; California Emission Equipped
1993 - 1993 RODEO ALL V6 3.2 ALL ALL ALL For Non-California Models; California Emission Equipped
1994 - 1995 TROOPER ALL V6 3.2 ALL ALL ALL Position: Front; For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 TROOPER ALL V6 3.2 ALL ALL ALL Position: Front; For Non-California Models; Cutting & Welding Required During Installation
NISSAN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1986 - 1988 200SX ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1988 200SX ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1986 200SX ALL L4 1.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1986 200SX ALL L4 1.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1988 200SX ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1988 200SX ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1994 240SX ALL L4 2.4 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1994 240SX ALL L4 2.4 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1984 - 1985 300ZX ALL V6 3.0 N ALL ALL For Federal Models; Cutting & Welding Required During Installation
1984 - 1985 300ZX ALL V6 3.0 N ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1984 - 1985 300ZX ALL V6 3.0 T ALL ALL For Federal Models; Cutting & Welding Required During Installation
1984 - 1985 300ZX ALL V6 3.0 T ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1989 300ZX ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1989 300ZX ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1990 - 1995 300ZX ALL V6 3.0 T ALL ALL Position: Left; For Federal Models; Cutting & Welding Required During Installation
1990 - 1995 300ZX ALL V6 3.0 T ALL ALL Position: Left; For Non-California Models; Cutting & Welding Required During Installation
1990 - 1995 300ZX ALL V6 3.0 T ALL ALL Position: Right; For Federal Models; Cutting & Welding Required During Installation
1990 - 1995 300ZX ALL V6 3.0 T ALL ALL Position: Right; For Non-California Models; Cutting & Welding Required During Installation
1990 - 1994 D21 ALL L4 2.4 ALL ALL ALL For Federal Models; RWD; Cutting & Welding Required During Installation
1990 - 1994 D21 ALL L4 2.4 ALL ALL ALL For Non-California Models; RWD; Cutting & Welding Required During Installation
1985 - 1985 MAXIMA ALL V6 3.0 ALL ALL ALL Position: Rear; For Federal Models; Cutting & Welding Required During Installation
1985 - 1985 MAXIMA ALL V6 3.0 ALL ALL ALL Position: Rear; For Non-California Models; Cutting & Welding Required During Installation
1991 - 1994 SENTRA ALL L4 1.6 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1994 SENTRA ALL L4 1.6 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1991 - 1994 SENTRA ALL L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1991 - 1994 SENTRA ALL L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1986 STANZA ALL L4 2.0 ALL ALL ALL For Federal Models; Wagon; Cutting & Welding Required During Installation
1986 - 1986 STANZA ALL L4 2.0 ALL ALL ALL For Non-California Models; Wagon; Cutting & Welding Required During Installation
TOYOTA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1992 - 1992 CAMRY ALL L4 2.2 ALL ALL ALL Position: Rear; For Federal Models
1992 - 1992 CAMRY ALL L4 2.2 ALL ALL ALL Position: Rear; For Non-California Models
1992 - 1994 CAMRY ALL V6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1992 - 1994 CAMRY ALL V6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1993 - 1993 CAMRY ALL L4 2.2 ALL ALL ALL For Federal Models
1993 - 1993 CAMRY ALL L4 2.2 ALL ALL ALL For Non-California Models
1986 - 1988 CELICA GTS L4 2.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1988 CELICA GTS L4 2.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1989 - 1992 CRESSIDA ALL L6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1989 - 1992 CRESSIDA ALL L6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1986 - 1986 SUPRA ALL L6 3.0 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1986 - 1986 SUPRA ALL L6 3.0 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1987 - 1992 SUPRA ALL L6 3.0 N ALL ALL For Federal Models; Cutting & Welding Required During Installation
1987 - 1992 SUPRA ALL L6 3.0 N ALL ALL For Non-California Models; Cutting & Welding Required During Installation
1988 - 1989 VAN ALL L4 2.2 ALL ALL ALL For Federal Models; 4WD; Cutting & Welding Required During Installation
1988 - 1989 VAN ALL L4 2.2 ALL ALL ALL For Non-California Models; 4WD; Cutting & Welding Required During Installation
VOLKSWAGEN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1994 - 1995 JETTA ALL V6 2.8 ALL ALL ALL For Federal Models; Cutting & Welding Required During Installation
1994 - 1995 JETTA ALL V6 2.8 ALL ALL ALL For Non-California Models; Cutting & Welding Required During Installation

Product Description

MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements.
MagnaFlow Universal Catalytic Converters form the basic building blocks for a comprehensive line of direct-fit applications.

The main benefit of the universal catalytic converter is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting and tube bending equipment that is readily available to most professional installers.

All Federal catalytic converters meet EPA requirements. Federal Catalytic Converters are not legal for sale, installation or use on vehicles registered in the state of California.

All California State Catalytic converters are CARB compliant. Converters in this catalog are based on Executive Orders issued by the California Air Resource Board and must be used in accordance with this information. In California, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size.

  • Stainless steel construction
  • Formulated for Gas and Diesel Applications

Product Reviews

Be the first to review this item.

Rating
Title
Review