Questions? Feedback? powered by Olark live chat software

Images May Not be Vehicle Specific. For Display Purposes Only.

COMP Push Rods - Hi-Tech

Brand: COMP Cams | Category: Rods

Select a Vehicle to See Parts for Your Car

Fitments

Select A Make to Narrow the Selection
CHEVROLET CHRYSLER DODGE GMC JEEP

Product Description

COMP Cams Engineers have found that the pushrod is one of the most important members of the valvetrain, and certainly the most taken for granted. Prior to extensive research at COMP Cams, it was thought the pushrod only had to be strong enough not to fail, bend, or burn up at the ends. Now our engineers have learned that the frequency of the pushrod must match that of all the rest of the parts in the valvetrain, as well as the RPM at which the engine will be run. Today’s all out unlimited race engines deserve the ultimate in quality at every step, and COMP Cams’ Hi-Tech Pushrods fill that requirement.

The one piece design from seamless, chromemoly tubing ensures the ultimate in strength. The ends are precision formed, yielding added thickness in the critical tip area for strength, while maintaining constant wall thickness and concentricity. The pushrods are then heat treated to insure compatibility with guide plates and for maximum strength. They are OD ground for consistency, and black oxide finished with a length and part number laser etched on the OD for ease of identification.

These pushrods are all .080” wall thickness. These pushrods may be ordered in sets of 8, or 16, or as single pieces. COMP Cams pushrods are identifiable by the part number and length laser etched on the pushrod itself. Insist on the best and accept no imitations.

Product Reviews

Be the first to review this item.

Rating
Title
Review