AEM Induction ETI Intake System; Includes Modules; Includes New Washer Fluid Reservoir And Mounting Bracket; California Air Resources Board Exempt: Yes; CARB EO: D-670-15; NISSAN 370Z


Images May Not be Vehicle Specific. For Display Purposes Only.

Images Of This Specific Part Number

Non-Specific Images

Place Order Here

Part #: 41-1001P
Notes: ETI Intake System
Includes Modules
Includes New Washer Fluid Reservoir And Mounting Bracket
California Air Resources Board Exempt: Yes
CARB EO: D-670-15
MSRP: $847.39
Your Price: $575.99
Free Shipping

Specs

Air Filter Color Red
Air Filter Height 5 in (127 mm)
Air Filter Large End Diameter 5.5 in (140 mm)
Air Filter Material Non-woven Synthetic
Air Filter Outlet Shape Round
CARB EO Number D-670-10
Clamp Material Steel
Clamp Style Regular
Clamps Included 10
Color Polished
Couplers Included 0
Estimated Horsepower Gain 9.67 HP @ 7100 RPM
Horse Power Increase 10 HP
Intake Pipe Color / Finish Polished
Intake Pipe Material Aluminum
Replacement Filter 21-202DOSK
RPM 7100
Weight 14.9 lb (6.8 kg)

This Item Also Available In

Part Number Price Notes & Specs
41-1001C $567.99 Notes ETI Intake System
Includes Modules
Includes New Washer Fluid Reservoir And Mounting Bracket
California Air Resources Board Exempt: Yes
CARB EO: D-670-15
Air Filter Color Red
Air Filter Height 5 in (127 mm)
Air Filter Large End Diameter 5.5 in (140 mm)
Air Filter Material Non-woven Synthetic
Air Filter Outlet Shape Round
CARB EO Number D-670-15
Clamp Material Steel
Clamp Style Regular
Clamps Included 10
Color Gunmetal Gray
Couplers Included 0
Estimated Horsepower Gain 9.67 HP @ 7100 RPM
Horse Power Increase 10 HP
Intake Pipe Color / Finish Gunmetal Gray
Intake Pipe Material Aluminum
Replacement Filter 21-202DOSK
RPM 7100
Weight 14.9 lb (6.8 kg)

All Fitments

NISSAN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2009 - 2011 370Z BASE V6 3.7 ALL ALL ALL
2009 - 2011 370Z TOURING V6 3.7 ALL ALL ALL
2010 - 2010 370Z 40TH ANNIVERSARY EDITION V6 3.7 ALL ALL ALL
2010 - 2011 370Z ALL V6 3.7 ALL ALL ALL

Product Description

Once again AEM is raising engineering standards with an all new series of innovative air intake systems. With a revolutionary ETI module and fully integrated design, we have eliminated the need to detune or stage an intake tube diameter as it crosses the MAF sensor. The sensor is electronically adjusted to read proper air density instead of using physical tube designs intended to “trick” the MAF reading. The result is bigger horsepower and torque gains.

Most modern fuel injected cars use a Mass Air flow (MAF) sensor to determine the air flow rate into the engine and meter fuel according to input from the sensor. The relation between the voltage output of the sensor and mass air flow is adversely affected by a shift to a larger diameter intake tube because the airspeed is reduced. This causes the MAF sensor to “under report” air flow causing a lean condition at worst and a Check Engine Light at best. To accommodate MAF sensor reporting, many intake systems reduce the diameter of the intake tube near the MAF sensor to stock or near stock size because of the need to maintain the correct air speed for the sensor to report the correct flow rate to the ECU.

AEM’s ETI Intake System is an alternative design approach that allows the intake tube to maintain its diameter resulting in more air flow into the throttle body. The ETI Intake System allows AEM to tune an engine for even more power by avoiding any tube down-sizing that will reduce overall airflow and horsepower. Instead the ETI electronically communicates with the MAF sensor to ensure an accurate amount of fuel is being delivered even though the tube is larger in size than the stock system. This means the vehicle maintains the calibration as intended by the factory while enjoying the benefits of our custom designed aftermarket intake system.

Product Reviews

Be the first to review this item.

Rating
Title
Review