The COMP Cams 641-100 machined steel valve locks are precision-engineered components designed for performance engine builds requiring reliable valve train operation. This set includes 100 individual locks (50 pairs) featuring a 7-degree taper angle, 3/8" stem diameter compatibility, and single groove design for race applications.
How Valve Locks Work:
Contrary to common belief, the tang inside a valve lock doesn't hold the retainer and spring in place during operation—it's not strong enough to withstand open spring loads exceeding 1000 lbs. Instead, the tang temporarily positions the lock, retainer, and spring relative to the valve until the retainer's taper nests around the lock's outer surface, creating a collet effect. This binding action intensifies as spring force increases when the valve opens, ensuring secure retention under demanding conditions.
Proper Sizing is Critical:
With various valve stem diameters beyond the standard 5/16", 11/32", and 3/8" sizes, matching valve locks to stem diameter is essential. When properly positioned, there should be a small gap between the two lock halves. If the halves meet without a gap, the locks are oversized. If they fit tight to the stem with a gap between the lock's middle and the stem's outer diameter, they're undersized.
Machined Steel Construction:
These machined steel locks offer superior dimensional accuracy and consistency compared to stamped alternatives, making them ideal for race engines with higher spring loads and RPM ranges. The precision machining ensures optimal contact with both the valve stem and retainer, maximizing the collet effect for secure retention. These locks provide the same valve spring location accuracy as COMP's Super Locks while maintaining compatibility with standard 7-degree retainers, eliminating the need to convert to 10-degree components.
Specifications:
- Quantity: 100 pieces (50 pairs)
- Taper angle: 7 degrees
- Valve stem diameter: 3/8"
- Groove configuration: Single groove
- Material: Machined steel
- Application: Race and high-performance engines
Ideal for engine builders seeking the precision and durability of machined locks for racing applications with elevated spring pressures and operating speeds.