Universal Cone Filter
PERRIN 2-PIECE FOAM FILTER
This is a direct replacement for most Subaru PERRIN Performance intakes systems including the Big
MAF intakes. It will also work on any
intake system which accepts a 3.125? filter.
Two Piece Design
PERRIN Performance filters feature a
unique two piece design allowing the user to remove the foam filter
element for easy cleaning. Easily run the element under a faucet
for cleaning and ring out by hand. Simply slip the foam sleeve back
over the filter frame and your ready to go.
Please check the Inlet Inside Diameter (I.D.) of the filter are
replacing as there are variations of intake design. This filter has
a 3.125? I.D. Inlet.
Open Cell Foam Element
PERRIN foam filters are made of
reticulated polyurethane foam which offers a minimal air
restriction. The filter element is sprayed with a special oil that
adheres to the foam making the poly matrix sticky to retain dirt.
Foam filters do not block dirt, they grab it, suffering only
minimal drops in air flow as they filter dirt, maintaining air flow
levels when other filters would clog.
Clean and Protect
Remove months of oil and grime by simply spraying on this easy to
use cleaner. Just let it sit on the filter element for a few
moments and simply rise in the sink. Once your filter is dry, just
spray on a fresh coat of oil and you are ready to go.
Filter Tech
PERRIN Performance intake filter elements
use open cell foam to capture dust and dirt. Washable and reusable,
PERRIN foam filter elements can last the
life of your vehicle. Foam filter elements offer superior
performance with minimal airflow restriction and amazing dust
holding capacity.
*PRE-FILTER
Protect your filter and intake from the most extreme
environments.
Improve efficiency
Pre-filters are designed to deflect the damaging debris, which
clogs air filters, compromising peak air-flow and horsepower. The
PERRIN Performance Pre-Filters down to
.005 Microns
Extend Service Intervals
The PERRIN Performance Pre-filter extends
the time between servicing intervals reducing costs and increasing
convenience.
Construction
The Pre-filter is constructed with a proprietary polyester mesh
with uniform micron openings. The mesh is UV resistant, and can withstand heat up to 450
degrees. The material is puncture resistant and has elasticity
characteristics allowing the threads to return to the original
position in the event the threads have been impacted or
shifted.