The H&R TRAK+ 70275571 is a 35mm DRA-Series hubcentric wheel adapter sold as a pair. Designed to convert a vehicle's 5/100 bolt pattern (57.1mm center bore, 14x1.5 thread) to a 5/120 bolt pattern (72.5mm center bore, 12x1.5 thread), these adapters allow BMW-bolt-pattern wheels to be fitted to vehicles originally equipped with a different bolt configuration. Special wheel bolts required for hub-side mounting are included.
About H&R TRAK+ Wheel Adapters
H&R TRAK+ Wheel Adapters are hubcentric spacers engineered to change a vehicle's bolt pattern for different wheel fitments. Like all TRAK+ products, they feature a full-contact hub design that mirrors the factory hub, ensuring even load-force distribution and proper lateral support. The wheel side of the adapter presents a different bolt pattern, enabling non-standard wheel fitment while maintaining hubcentric alignment.
DRA Series — What You Need to Know
The DRA Series provides 40–60mm of track widening. DRA spacers bolt directly to the vehicle hub using special included wheel bolts, and feature new threaded holes on the wheel-facing side for secure wheel attachment. No sourcing of additional hardware is required — everything needed is included.
Key Features:
- Hubcentric design with full-contact hub for even load distribution and lateral support
- 35mm thickness — DRA Series (40–60mm track widening range)
- Bolt pattern conversion: 5/100 – 57.1 CB (14x1.5) to 5/120 – 72.5 CB (12x1.5)
- Manufactured from a proprietary alloy with higher tensile strength than 6061-T6 billet aluminum
- Hard anodized finish for long-lasting durability and corrosion resistance
- Maximizes vehicle track width for improved lateral stability and lowered roll center
- Special hub-mounting wheel bolts included
- Sold as a pair (two adapters)
- Engineered in Germany
Wheel Bolt Safety Guidelines
When selecting wheel bolts, ensure the new bolts are longer than the originals by the width of the spacer used, and that the bolt head style matches the existing hardware. Minimum engagement requirements by thread pitch:
- M12 x 1.25 — 8.0 turns (approx. 10mm load-bearing shaft length)
- M12 x 1.50 — 6.5 turns (approx. 10mm load-bearing shaft length)
- M12 x 1.75 — 6.5 turns (approx. 12mm load-bearing shaft length)
- M14 x 1.25 — 9.0 turns (approx. 12mm load-bearing shaft length)
- M14 x 1.50 — 7.5 turns (approx. 12mm load-bearing shaft length)
- 1/2" UNF — 8.0 turns (approx. 11mm load-bearing shaft length)
After installation, rotate the wheel by hand to confirm it spins freely and that the bolts do not contact any brake system components, including ABS sensors. Note that clearance tolerance on some vehicles may be as little as 2mm.
Bolt Head Type Reference:
- Taper 60° — End digit 01
- Round head M12/d24mm or M14/d28mm — End digit 02
- Round head M12/d26mm (e.g., OE VAG wheels) — End digit 03
- Flat head Porsche OEM wheels M14 x 1.5 — End digit 06