Cobalt Friction CRB.XR2.D30-15.0mm Brake Pads - XR2

Based on the XR1 formulation, Cobalt Friction XR2 Brake Pads features a strong initial bite with a controlled transition to a medium-high rising torque profile. Particularly well-suited to chassis/tire combinations or surface conditions which do not respond well to high initial brake energy (or where the XR1 material is too aggressive), but still require high average torque levels. By allowing the tire contact patch to extend and the chassis geometry to stabilize before imparting maximum braking torque, the driver remains in full control throughout the brake zone, from initial pedal application to the final release.

Compound Characteristics

• Temperature Range 100-1600F (38-871C)
• Intial Bite/Attack Aggressive
• Torque Level & Profile High + Medium-Fast Ramp
• Modulation Excellent
• Release Excellent
• Consistency (across temp. range) Very Good
• Consistency (throughout pad depth) Excellent
• Pad Wear & Finish Very Good (no edge crumbling or chipping)
• Pad Wear Rate-of-Change < 10.0%-ROC from New-to-End of Life
• Disc Wear & Finish Excellent (no grooving or cupping)

Typical Applications

• Sports Car Grand-Am Rolex Daytona Prototype & GT, Grand-Am Koni Challenge GS & ST, SPEED World Challenge Touring Car
• Sports Racer IMSA Lights, SCCA ASR, CSR, DSR, etc.
• Formula Car/Open Wheel Star Mazda, etc.
• Rally & Rallycross Tarmac and gravel applications
• Club Racing & HPDE SCCA, NASA, BMWCCA, PCA & PBOC, etc. (GVW below 2800lbs)