Protect-A-Wire
Protect spark plug wires from power-robbing damaging under hood
radiant heat while preventing potential burning, hardening and
cracking of wires that could lead to engine misfire and/or damage.
Easily installs on wires by removing the distributor boot and
connector.
Made from high temperature resistant fiberglass composite
material, Protect- A-Wires are available in four vivid colors.
Besides use on spark plug wires, Protect-A-Wire can also be used to
protect electrical wiring, hoses and fuel lines for a professional
detailed look. Each kit comes complete with DEI
Hi-Temp Shrink Tubes for that final finishing touch.
Features
- Withstands 500F continuous 1200F radiant heat
- Four vivid colors; Silver, Black, Red & Blue
- Available in 2 and 8 cylinder kit s
- Can be used on any hose, wire or fuel line up to 10mm
Protect-A-Boot
Protect-A-Boots provide the ultimate protection to spark plug boots
and wires from extreme temperatures generated by vehicle exhaust
headers and manifolds. Made from a high temperature resistant
fiberglass composite material and double wall construction,
Protect-A-Boots prevent burning, hardening and cracking that could
lead to engine misfire and damage.
If ignition wires are touching or close to exhaust headers we
recommend the added protection of wrapping the headers with
DEI exhaust wrap in the problem area(s) in addition to
installing Protect-A-Boots.
Features
- Double-wall double-stitch construction
- Installs in seconds
- Universal-fits most straight or angled boots
- Withstands 1200F direct continuous heat
- Available in four vivid colors
High Temp Shrink Tubes
Hi-Temp Shrink Tubes are available in four colors, two sizes and
have a shrink ratio of 3 to 1. Shrink Tubes are easy to install
with an ordinary heat gun. 18mm size shrinks to 6mm and 12mm size
shrinks to 4mm.
Features
- Great finished look to cable, hose and wire
- Use to bundle wires as an alternative to plastic ties or
tape
- Protect electrical connections from elements
- Available in Gray, Black, Red and Blue
- 25 per package
Professional grade flexible flame retardant polyolefin tubing
provides excellent insulation, protection from dust, solvents and
other foreign material as well as providing strain relief. Over
expanded tubing shrinks down to 33% of it's original diameter to
fit snugly over wires and connectors for a water-tight protective
seal without reduction in tube length. Hi-Temp Shrink Tubes can be
used to insulate wires, wire splicing, connections and terminals
and meets the material functional properties of Military Spec
DTL-23053/5C.
- Operating temperature range: -67F to 275F; apply at 120 to 180F
using heat gun
- Thick wall construction and remains flexible
- Meets the material functional properties of Military Spec
DTL-23053/5C
- 18mm by 4 feet
- Hi-Temp Shrink Tubes can be used to insulate wires, wire
splicing, connections and terminals
