Protect-A-Wire
Protect spark plug wires from power-robbing damaging under hood
radiant heat while preventing potential burning, hardening and
cracking of wires that could lead to engine misfire and/or damage.
Easily installs on wires by removing the distributor boot and
connector.
Made from high temperature resistant fiberglass composite
material, Protect- A-Wires are available in four vivid colors.
Besides use on spark plug wires, Protect-A-Wire can also be used to
protect electrical wiring, hoses and fuel lines for a professional
detailed look. Each kit comes complete with DEI
Hi-Temp Shrink Tubes for that final finishing touch.
Features
- Withstands 500F continuous 1200F radiant heat
- Four vivid colors; Silver, Black, Red & Blue
- Available in 2 and 8 cylinder kit s
- Can be used on any hose, wire or fuel line up to 10mm
Protect-A-Boot
Protect-A-Boots provide the ultimate protection to spark plug boots
and wires from extreme temperatures generated by vehicle exhaust
headers and manifolds. Made from a high temperature resistant
fiberglass composite material and double wall construction,
Protect-A-Boots prevent burning, hardening and cracking that could
lead to engine misfire and damage.
If ignition wires are touching or close to exhaust headers we
recommend the added protection of wrapping the headers with
DEI exhaust wrap in the problem area(s) in addition to
installing Protect-A-Boots.
Features
- Double-wall double-stitch construction
- Installs in seconds
- Universal-fits most straight or angled boots
- Withstands 1200F direct continuous heat
- Available in four vivid colors
High Temp Shrink Tubes
Hi-Temp Shrink Tubes are available in four colors, two sizes and
have a shrink ratio of 3 to 1. Shrink Tubes are easy to install
with an ordinary heat gun. 18mm size shrinks to 6mm and 12mm size
shrinks to 4mm.
Features
- Great finished look to cable, hose and wire
- Use to bundle wires as an alternative to plastic ties or
tape
- Protect electrical connections from elements
- Available in Gray, Black, Red and Blue
- 25 per package
Protect-A-Boots provide the ultimate protection for spark plug
boots and wires from extreme temperatures generated by vehicle
exhaust headers and manifolds. Made from a high temperature
resistant fiberglass composite material and double wall
construction. Protect-A-Boots prevent burning, hardening and
cracking that could lead to engine misfire and damage. If ignition
wires are touching or close to exhaust headers we recommend the
added protection of wrapping the headers with DEI exhaust wrap in
the problem area(s) in addition to installing Protect-A-Boots.
- Withstands 1200F direct continuous heat
- Universal-fits most boots straight or angled
- Installs in seconds
- Double-wall double-stitch construction in four vivid
colors
- 8 in, silver and 2-pack
