Eastwood Company Premium Acrylic Urethane Topcoat Paint

Eastwood Company Premium Acrylic Urethane Topcoat Paint is a single-stage, catalyzed urethane automotive paint. It gives a long-lasting, durable finish on car and truck bodies, hot rod and restoration projects, and other metal surfaces. Because it is a single-stage system, color and gloss go on in one step, with no separate clear coat.

Key Features:

• Catalyzed 2-component urethane for lasting durability
• Highly resistant to UV rays, chemicals and chips
• Made from quality raw materials with advanced coatings technology
• Holds its gloss longer than acrylic, alkyd and lacquer coatings and resists yellowing
• Mixes 3:1 with a required activator, with no additional reduction needed, though reducer can be used if desired
• Made in the USA

Application Notes:

• An activator is required for the paint to cure properly. Check the product details for activator selection.
• Mix three parts paint with one part activator. The mixed paint may begin to gel after about two hours at 70°F.
• Recommended HVLP gun setup is a 1.3-1.5 mm fluid tip at 25-30 psi inlet pressure.
• The paint is typically dust free in 10-15 minutes and tack-free within one hour at 70°F.
• Re-coat once the previous coat has flashed, or within 18 hours. After 18 hours, abrade the surface before re-coating for proper adhesion.

Eastwood Company Premium Acrylic Urethane Topcoat Paint suits DIY painters and professionals who want a durable, good-looking finish that holds up to sun, chemicals and road wear.