Recaro 2025.001.0 RECARO Base Frame / Seat Slider – McLaren 6##/7## Super Series (2014+)

RECARO base frame (seat rail / slider) for the McLaren 6##/7## Super Series, model year 2014/04 on. Ultra-low-position frame in RECARO’s new-structure, one-position design. Side-airbag canceller included.

Kit contents (per RECARO installation manual UL0016)

• Base frame rails, left and right
• Slide lever
• Cross member
• M8 cap bolts (25/30/35 mm), M8 disc-spring washers, M8 flange nuts, 5 mm and 10 mm spacers
• Seat-belt buckle anchor hardware (M10 × 30 hex bolt, M10 nut, washer, collar)
• Edge protector (felt) and airbag canceller

Fitment notes

• Steering-wheel offset: seat sits 10 mm toward the door (9 mm closer to the steering-wheel center than the stock seat).
• At the lowest setting, the rearmost seat-slide position cannot be used.
• Armrest cannot be fitted.
• Offered for the driver’s seat only, because some cars have a passenger occupancy sensor and some do not; on cars with the sensor the warning light will come on. 675/720 confirmed on driver’s side; 650 not confirmed.
• The side-airbag function built into the stock seat is lost; the airbag warning light must be deactivated.
• One frame fits either left or right seat – order 2 for both sides.
• Cannot be installed with any seat other than those listed in RECARO’s matching information (Pro Racer RMS).