The TeraFlex 1449482 Enduro LCG (Low Center-of-Gravity) Long Arm Suspension System delivers a 4-inch lift engineered for serious off-road performance without sacrificing everyday on-road comfort and control. Designed for the LJ Wrangler Unlimited (long wheelbase), this complete system includes LCG Long Arm Brackets and all required components — shocks not included.
The Enduro LCG bridges the gap between a basic short arm kit and a full Pro LCG system. It uses the same lower adjustable LCG Long Control Arms and Brackets found in the Pro LCG, while the adjustable Rear Upper Short Control Arms bolt directly to the factory upper control arm mounting points — requiring only moderate frame modifications. The result is significantly greater suspension and steering adjustability compared to a standard short arm lift kit.
Adjustable long and short control arms precisely balance front caster and pinion angles, optimize rear pinion angle, tune anti-squat geometry, and properly position the tires. The LCG Long Arm Brackets and 4-Link Rear Axle Truss reposition frame-end control arm mounting points to relax suspension link angles on 3–5-inch lifts, reducing bushing stress during extreme droop and minimizing shock load transferred through the control arms. The system also restores front and rear roll axis angles to minimize brake dive and acceleration squat, and delivers measurably reduced noise, vibration, and harshness (NVH).
The included HD Adjustable Front Track Bar, Drop Pitman Arm (4-inch+), and Rear Track Bar Bracket improve steering response, re-center the axles to optimize vehicle roll center, and reduce body roll for confident handling on any terrain.
What's Included:
- 4-Inch Lift Coil Springs — Front: #1843402 / Rear: #1844402
- Short Control Arm Kit — Rear Upper (0–4 Inch Lift) (#1614800)
- LCG Long Control Arm & Bracket Kit — Lower (3–5 Inch Lift) (#1447780)
- HD Adjustable Front Track Bar (3–4 Inch Lift) (#1743022)
- Rear Track Bar Axle Bracket Kit (3–6 Inch Lift) (#1944000)
- Drop Pitman Arm (3.5–6 Inch Lift) (#1922133)
- 2.25-Inch Front Lower Bump Stop Extension Kit (3–4 Inch Lift) (#1910234)
- 2.25-Inch Rear Upper Bump Stop Extension Kit (4 Inch Lift) (#1910204)
- 10-Inch Front Sway Bar Quick Disconnect Kit (3–6 Inch Lift) (#1743090)
- 10.5-Inch Rear Sway Bar Link Kit (2.5–5 Inch Lift) (#1944011)
- BellyUp Skid Plate Kit (#4648403)
- HD Steering Box Skid Plate Kit (#4627400)
- 1-Inch Transfer Case Lowering Spacer Kit — 2003–2006 TJ (#1900103)
- 26-Inch Front & 26-Inch Rear Stainless-Steel Braided Brake Line Kit (#4350400)
- Rear Lower Shock Extension Kit (#1544790)
- All necessary hardware
Important Installation Notes:
- Does NOT include shocks — TeraFlex 9550 VSS Twin-Tube or Falcon Performance Shocks recommended
- Requires aftermarket wheels with 4.5-inch backspacing or less (Offset Wheel Adapters #1005200 available separately for stock wheels)
- 4-inch+ lifts require a CV-style driveshaft and Slip Yoke Eliminator Kit (#4444400 or #4444401)
- Requires cutting/removal of factory control arm bracketry and welding for LCG Long Arm Bracket installation
- Professional alignment required after installation
- Not compatible with TJ Wrangler/Unlimited Rubicon models
- 2003–2006 Rubicon models require BellyUp Compressor Mount Bracket Kit (#4847400)
- Fits all OEM axles including Dana 30, 35, 44, and Rubicon 44
- Backed by TeraFlex Limited Lifetime Warranty against defects