Eastwood Company 52431ZP USA Bright White Single Stage Urethane Paint 24oz

Eastwood's premium single-stage acrylic urethane topcoat provides exceptional long-lasting beauty and durability for automotive, marine, and powersports applications. This USA Bright White formula features a bit of black tint that helps shade this white just right for use on its own, or paired with another color in a two-tone combination.

Key Features:

• Premium 2-component topcoat system blended with top-quality raw materials and advanced composition coatings technology
• Superior to acrylic, alkyd and lacquer coatings
• Single-stage urethane paints hold their gloss longer and won't yellow
• 3:1 mix ratio - thoroughly mix three parts paint with one part activator
• Reducer not required but can be reduced up to 20% with urethane reducers for best flow
• Paint will handle up to 300 degrees without delamination, though color shift may occur in high heat settings
• May be applied as a stand-alone single-stage system or combined with urethane clear as a basecoat/clearcoat system

Application Details:

• Apply in two to three medium wet coats as necessary to achieve sufficient coverage, allowing ten-minute flashes between coats
• Recommended dry film thickness of approximately 2 mils
• Dust-free within 10-15 minutes and tack-free within one hour at 70°F
• Paint may begin to gel after approximately two hours at 70°F - mix only what you need
• May be applied over epoxy, urethane or polyester primers - white epoxy sealer recommended for best coverage

This 24 oz quart provides approximately 30 square feet of coverage and is ideal for automotive restoration, custom projects, or refinishing work where a durable, high-gloss white finish is desired. When used as a single-stage urethane paint, this coating may be wet-sanded and polished for increased depth and gloss.