StopTech 127.33042R Drilled & Slotted Sportstop Rotor
StopTech recognizes that great brakes need to look as good as
they perform. Performance wheels and tires are best complemented
with StopTech SportStop Cross-Drilled & Slotted rotors.
SportStop Drilled & Slotted brake rotors prevent glazing of
the pads, add bite and improve wet and dry braking performance.
Every SportStop Drilled & Slotted brake rotor is produced
from a high quality Centric Parts blank casting and finished in a
durable e-coating for corrosion resistance.
SportStop Drilled & Slotted rotors look great behind custom
wheels, improve the initial bite of the brake pads, and help wipe
away the debris that forms between the pad and the disc. A set of
SportStop cross-Drilled & Slotted rear replacement rotors is a
great way to match the aesthetics of a StopTech Big Brake Kit with
the cross-Drilled & Slotted rotor option.
E-Coated Finish
Every SportStop rotor is finished with black e-coating on both
sides of the hat, inside the the cooling vanes, and on the outside
edge. E-coating is a superior electro-statically applied finish
designed to withstand 400 hours of salt water exposure without
rusting. This is especially important on both mounting faces of the
hat where it touches the hub flange and back face of the wheel. Any
accumulation of rust in these area can lead to installed lateral
run out issues.
Power Alloy Metallurgy
Power Alloy metallurgy is exclusive feature of SportStop rotors. In
specific vehicle applications, StopTech works with foundry partners
to increase the molybdenum or carbon content of the castings, and
to carefully control the cooling rate during production to reach
targets for hardness and tensile strength.
Cooling Vane Design
Nearly all SportStop Cross-Drilled & Slotted rotors have unique
Drilled & Slotted hole patterns for the left and right sides of
the vehicle. For these directional patterns, straight vane or
pillar vane rotors are used to ensure that a Drilled & Slotted
hole never touches a cooling vane.