Nitrous Express 16011 Maximizer 6 Progressive Nitrous Controller

The Nitrous Express Maximizer 6 (16011) is a progressive nitrous controller. It can run up to four separate stages of nitrous, based on time, RPM, MPH, throttle percentage or boost pressure. It works on naturally aspirated and forced induction engines, and on gasoline and diesel engines.

Key Features:

• Safety monitoring: It monitors throttle percentage, engine RPM, nitrous pressure, and boost or pan vacuum. It also monitors three other user-defined sensors, so the engine is in the correct state to accept nitrous.
• Protective response: If it detects a condition outside the safe range, it shuts down or pulls back nitrous flow to help protect the engine.
• Programming: It is normally set up and tuned with a Windows-based laptop program. An optional 4 inch touch screen display can connect to view and adjust common tuning parameters without a laptop.
• Data logging: It automatically logs all inputs, including the 3 user-defined inputs. Internal memory can store over 100 quarter mile runs before you need to save them to a laptop.
• Built-in drivers: Stage one and stage two have internal drivers rated at 70 amps each, or 140 amps in single stage mode. Stages 3 and 4 need external drivers, which are available separately.
• Multiple progression options: These suit a range of racing types, including time-based progression, which is popular for drag racing from a dead stop, and MPH progression.

The Maximizer 6 gives you a way to tune a progressive nitrous setup while monitoring engine conditions.