The TeraFlex Alpine RT Coilover Suspension System (MPN: 1357024) is a purpose-built long arm coilover suspension system engineered specifically for the 4-door JL Wrangler with HD front and rear axles (3.25-inch tube diameter) and compatible with 2.0L and 3.6L powertrains. This system delivers race-inspired performance alongside genuine everyday drivability — delivering a 4.5-inch lift with Falcon 3.3 Series coilovers tuned specifically for the JL platform.
At the core of this system are Falcon 3.3 Series coilover shocks engineered for utterly silent operation — a critical differentiator in a market where coilover noise is so common that problems have been given names. Spring Twang, Slider Zipping, Slider Slap, internal bypass clicking, and shock mount bushing squeak are all addressed through thoughtful engineering. Sealed gimbal bearing shock mounts paired with TeraFlex's proprietary coilover mount solution allow full suspension cycling without any component contact. The hard-anodized shock body serves as a precision bearing surface for sealed, lubricated spring sliders equipped with roller-bearing spring seats, ensuring silent spring movement during compression, extension, and rotation.
Key Features:
- 4.5-inch lift with +/- 1.25-inch adjustability via quick-adjust snap rings
- 13-inch stroke front and rear for maximum articulation
- Falcon 3.3 Series quick-adjust tuning with adjustable crossover for true dual-rate performance
- RT4 long arm suspension for improved control, flex, and stability
- Bolt-on 1/4-inch laser-cut reinforced coilover brackets
- Designed for standard 3.0-inch springs
- JL-specific spring rates and shock valving
- Coated, booted, and sealed oversized gimbal lock bearings maintain proper shock orientation
- Refreshed speed bumps provide 4x the bottoming resistance — silently
- Improved dynamic roll control and low-speed damping
- Dramatic improvement in on-road comfort and off-road performance
Installation Requirements:
- Requires wheels with 4.75-inch backspacing or less — or 1.75-inch Wheel Offset Adapter Pair (SKU: 1057000 x2, sold separately) for use with stock wheels
- Requires front driveline double cardan upgrade due to increased suspension travel
- Requires cutting and removal of factory control arm bracketry and spring buckets
- Some light inner fender liner trimming required
- Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards
- Alignment required after installation
- Not compatible with OEM rear sway bar — TeraFlex ST Sway Bar (SKU: 1774100) recommended
This SKU (1357024) is configured for: Front HD 3.25-inch Diameter Axle / Rear HD 3.25-inch Diameter Axle — 2.0L/3.6L Powertrains. Additional axle and powertrain configurations are available under separate SKUs. Not compatible with 2-door JL models.
Related SKUs by Axle Configuration:
Front JL Rubicon Axle / Rear JL Rubicon Axle:
- 1357001 — 3.0L Diesel
- 1357002 — 2.0L e-Torque
- 1357003 — 3.6L e-Torque
- 1357004 — 2.0L/3.6L
- 1357005 — 4XE
- 1357006 — 392
Front JL Rubicon Axle / Rear HD 3.25-inch Diameter Axle:
- 1357011 — 3.0L Diesel
- 1357012 — 2.0L e-Torque
- 1357013 — 3.6L e-Torque
- 1357014 — 2.0L/3.6L
- 1357015 — 4XE
- 1357016 — 392
Front HD 3.25-inch Diameter Axle / Rear HD 3.25-inch Diameter Axle:
- 1357021 — 3.0L Diesel
- 1357022 — 2.0L e-Torque
- 1357023 — 3.6L e-Torque
- 1357024 — 2.0L/3.6L (This SKU)
- 1357025 — 4XE
- 1357026 — 392