Skyjacker TJ60RR2LTK-N 6 in. Rock Ready 2 Dual Rate Long Travel Long Arm Suspension Lift Kit with Nitro Shocks

The Skyjacker TJ60RR2LTK-N is a 6-inch Rock Ready 2 Series Long Arm Suspension Lift Kit featuring Nitro 8000 nitrogen gas-charged shocks. This comprehensive suspension system delivers a high-performance balance of on-road drivability and aggressive off-road capability, purpose-built for serious trail use and rock crawling.

At the core of this system, Skyjacker re-engineered the TJ's suspension geometry through an integrated bolt-on sub-frame assembly. This sub-frame supports Bent High-Clearance Lower Adjustable Links designed for maximum flex strength, while Upper Control Arm Relocation Brackets with Adjustable Front and Rear Upper Links improve geometry correction at lift height. The upper frame mount uses pressed-in HD OEM-style vulcanized rubber bushings, and the axle mount incorporates Rock Jock's 2-1/2 in. forged Johnny Joints — providing over 30 degrees of unrestricted flex movement in any direction.

Dual Rate Long Travel Coil Springs feature a two-stage spring rate progression engineered specifically for this application. The first Flex Rate stage delivers a compliant ride with full articulation ability during suspension droop, keeping coil springs seated and tires in contact with terrain. The second Ride Rate stage engages under compression, resulting in a smoother, more controlled ride on- and off-road.

Included Nitro 8000 shocks are pressurized to 150 PSI with nitrogen gas and utilize multi-stage velocity-sensitive valving for immediate, consistent damping response across a wide range of terrain and speeds. Twin-tube construction, an oversized piston head, a 5/8 in. hardened double-chromed rod, and red polyurethane bushings round out the shock's durability features.

Kit Includes:

• Dual Rate Long Travel Coil Springs
• Bent High-Clearance Lower Adjustable Links
• Upper Control Arm Relocation Brackets
• Adjustable Front and Rear Upper Links
• Bolt-On Sub-Frame Assembly
• Front Adjustable Track Bar
• Rear Track Bar Bracket
• Pitman Arm
• Stainless Steel Brakelines
• Sway Bar End Links (Disconnect)
• Bump Stop Spacers/Extensions
• T-Case Shifter Bracket
• Shock Relocation Hardware
• All necessary mounting hardware and detailed instructions

Important Notes: This kit does not fit Unlimited (LJ) models. Front and rear replacement drive shafts are required for this installation. Factory skid plates cannot be reused with the Long Arm Series.