Fuel Pump Bolt
0 results found
No products match your current filters
Try the following
- Remove some filters to broaden your results.
- Clear the vehicle filter to see all available products.
- Check a different category or manufacturer.
- Browse the top categories below to find what you need.
What Is a Fuel Pump Bolt?
A fuel pump bolt is a small but critical piece of hardware that secures a fuel pump, pump housing, or pump cover to the engine, frame, or fuel tank. Part of the broader Air and Fuel Delivery system, these fasteners hold the pump in its correct position so it can draw fuel and send it to the carburetor or injectors at a steady rate. Because they are exposed to vibration, heat cycles, and fuel vapor, the bolts used here are expected to maintain consistent clamping force for the life of the installation.
Why Fuel Pump Bolts Matter
It is easy to overlook a bolt, but the fuel pump mounting point is a sealed joint. If a bolt loosens, stretches, or corrodes, the gasket or O-ring beneath it can lose compression, which may allow fuel to seep out or air to be drawn in. Air leaks on the suction side of a pump can cause hard starting, hesitation, and lean running, while external fuel leaks create an obvious fire hazard. Replacing worn or damaged hardware during a pump service is inexpensive insurance against these problems.
Key Considerations When Choosing Fuel Pump Bolts
- Thread size and pitch: Match the diameter, thread pitch, and length to the original specification so the bolt seats fully without bottoming out or stripping the threads.
- Head style: Hex, socket-head, and flange styles each affect tool access and how evenly the load is spread across the pump flange.
- Material and finish: Plated or stainless steel hardware resists corrosion from moisture and road salt, which helps keep fasteners removable at the next service interval.
- Fitment: Pump bolts are often application-specific, so confirm that the part is intended for your make, model, and year.
- Torque: Always tighten to the manufacturer's torque specification. Over-tightening can crack a housing or distort a gasket surface, while under-tightening invites leaks.
Installation Tips
Clean the mounting surface and threads before reassembly, and replace the gasket or seal whenever the pump is removed. Tighten bolts gradually and in a crisscross pattern where multiple fasteners are used, so the pump seats evenly. If the original bolts show rounded heads, thread damage, or rust, replace them rather than reusing them. Where thread-locking compound is called for, use only a product that is compatible with fuel exposure and follow the service manual.
Featured Brand
Drag Specialties is a well-known name in aftermarket V-Twin motorcycle parts, with a heritage dating back to 1968 and a catalog built largely around Harley-Davidson fitments. The brand also supplies fuel-system components and hardware, making its fuel pump bolt a practical choice for riders and builders who want matched, application-specific fasteners when servicing or customizing a fuel delivery setup.
Shop With Confidence
Whether you are rebuilding a pump, chasing a persistent fuel smell, or simply refreshing hardware during a restoration, choosing the correct fuel pump bolt helps protect the reliability of the entire fuel delivery system. Verify fitment, replace worn fasteners and seals together, and torque to specification for a secure, leak-free installation.