The Ksport BKBM460-863SO SuperComp Rear Big Brake Kit is Ksport's most extreme bolt-on brake upgrade, engineered to deliver maximum stopping power without requiring any vehicle modifications. Featuring an 8-piston caliper configuration paired with a 400mm (15.7 in.) 2-piece floating slotted rotor, this kit delivers a dramatic improvement in braking performance, fade resistance, and pedal feel over the factory brake system.
SuperComp Differential Bore Caliper
The SuperComp caliper is machined from a single billet of aircraft-grade aluminum, weighing just over 7 lbs. each. Its differential bore configuration uses larger pistons than Ksport's ProComp calipers for increased clamping force and more even pad wear. Machined-in protection grooves shield the bridge tubes, while aluminum pistons, high-temperature seals, and stainless steel brake pad wear plates are standard. The opposed-piston design greatly improves caliper rigidity over OEM sliding caliper designs. Four brake pads are included per caliper.
2-Piece Floating Rotor Assembly
The SuperComp system comes standard with Ksport's 2-piece floating disc, which reduces both rotating and unsprung weight. The floating disc design prevents thermal stresses from warping the rotor or cupping the braking surface under extreme heat. Every rotor is heat-treated and balanced before shipment. The unique slot pattern on the 400mm rotor minimizes braking noise while expelling gas and pad debris more efficiently than conventional slot designs. Slotted rotors are recommended for track-oriented and performance driving use.
NAOC Ceramic Brake Pads
Included NAOC ceramic brake pads deliver optimal braking performance across a wide operating temperature range of 194°F–1,022°F. Compared to race pads, they reduce brake dust by 50% or more and generate significantly less rotor wear and noise, making them suitable for street and occasional track conditions.
DOT-Compliant Stainless Steel Brake Lines
Stainless steel braided brake lines are included and fully DOT compliant. Unlike rubber OEM lines, they resist expansion under pressure for a firmer, more responsive pedal feel.
Key Features:
- 8-Piston differential bore SuperComp caliper — larger pistons than ProComp for greater clamping force
- Aircraft-grade billet aluminum caliper construction — approximately 7 lbs. each; corrosion resistant
- Aluminum pistons with high-temperature seals and stainless steel pad wear plates
- 400mm (15.7 in.) 2-piece floating slotted rotor — heat treated and balanced; reduces rotating and unsprung weight
- Floating disc design prevents thermal warping and braking surface cupping
- NAOC ceramic brake pads — 194°F–1,022°F operating range; 50%+ less brake dust vs. race pads
- DOT-compliant stainless steel braided brake lines — stops line expansion under pressure
- CNC machined carbon steel caliper brackets included
- Bolt-on installation — no vehicle modifications required in most applications
- 12-month warranty covering manufacturer defects
The Ksport SuperComp big brake kit is built to order. All Ksport brake kits are TUV/ISO 9001:2008 approved and tested and proven on and off the track.