Industrial Injection 227414 S467.7 2nd Gen Swap Turbo Kit Standard Cover .90 A/R

The Industrial Injection 227414 S467.7 2nd Gen Turbo Swap Kit is a complete performance turbocharger upgrade engineered for the 5.9L Cummins diesel. The stock turbocharger on these engines is limited to supporting power levels below approximately 450 horsepower, and its factory positioning — centered on cylinders four and five rather than three and four — causes the front cylinders to run hotter than the rear. This kit addresses both airflow limitations and turbo placement by squaring the turbo properly on the engine and dramatically improving overall boost capacity.

At the core of this kit is the S467.7 turbocharger featuring a 67.7mm compressor wheel, an 83/74mm turbine wheel, and a .90 A/R T4 turbine housing with a standard cover. The S467 platform is capable of flowing up to 85 lbs/min of air, making it well-suited for power levels above 600 rear wheel horsepower when paired with appropriate tuning and injector upgrades. Lower exhaust gas temperatures (EGTs) are a key benefit, contributing to both performance gains and long-term engine reliability under heavy load.

Key Features:

• S467.7 turbocharger with standard cover and .90 A/R T4 turbine housing
• 67.7mm compressor wheel with 83/74mm turbine wheel
• 85 lbs/min airflow capacity
• Reduced exhaust gas temperatures (EGTs)
• Complete installation kit — includes all hardware needed for a clean install
• Custom S&B designed intake included
• Injector upgrades recommended for maximum spool-up and power
• Suitable for street/track performance use

Installation Note: This kit includes a downpipe that may require fabrication, cutting, or welding to mate with the factory exhaust system. Vehicles equipped with a catalytic converter must retain it; removal may violate federal or local regulations.

Emissions Notice: All Industrial Injection performance products are intended for closed-circuit competition use only and are not legal for on-road, off-road, or dual use. Compliance with all applicable state and federal emissions standards is the sole responsibility of the consumer.