GM Strut Service Set
REMOVABLE CUTTER
ROTOR-BOR
Air drill driven tool made to cut out the spot welds holding the
original equipment alignment plate to the top of strut towers. Once
the plate is loosened caster and camber can be adjusted. Sold with
3/8 and 5/16 removable cutters. Use our Cool Tool cutting fluid for
longer cutter life.
FORD 3/8 DIAMETER
ROTOR-BOR
Use this air drill driven tool to cut out the spot welds holding
the original equipment
alignment plate to the top of the strut tower of all
Taurus/Sable/Windstar vehicles. Once the plate is loosened caster
and camber can be adjusted.
ROTARY FILE
SET
High quality carbide rotary files, ideal for elongating strut holes
on many vehicles. Use
when installing 82110, 82120, and 87350 adjusters. May be used with
1/4 or 3/8
drills at high speeds. Available individually. Use our Cool Tool
cutting fluid for longer cutter life.
GM STRUT SERVICE
SET
This kit offers everything necessary for servicing GM
W body vehicles. Kit includes strut
retaining tool needed to maintain strut tube alignment with the
coil spring while the strut is disassembled. Includes the tools
necessary for removing and installing gas charged or oil filled
strut cartridges. Lets you work through the strut tower while it is
still on the vehicle. Packaged in a durable plastic case.
MACPHERSON STRUT
SPRING COMPRESSOR
This compressor allows for safe, economical compression of
MacPherson strut springs. Hooks are designed to lock the coil in
place. To be used on all struts except those with vinyl coatings.
Use of both hooks per spring is required. Maximum jaw opening of
230mm.
INTERNAL COIL
SPRING COMPRESSOR
A handy chrome-moly steel compressor designed to fit inside most
coil springs with an internally mounted shock. Will accommodate
spring lengths from 8-1/4 to 14. It can be use on any coil spring
with a minimum inside diameter of 3-3/8 to a maximum inside
diameter of 5-5/8 and wire diameters up to 3/4.
UNIVERSAL SPRING
COMPRESSOR
This two-piece internally threaded spring compressor is a great
option for MacPherson strut, coilover, and other accessible
springs. With 7 of travel and a 6,000 lbf max working load with a
3x safety factor, this is an ideal tool for almost any spring.
Vinyl coated ends protect the spring from damage, safety jaws keep
the compressor stabilized on the spring, and the ball bearing load
surface makes compression easy using simple hand tools. Use of both
hooks per spring is required.
FRONT STRUT
TOOL
This tool was designed for turning the valves on adjustable damping
struts when our SPC Adjustable Strut Mounts are used
on BMWs and Mini Coopers.